Share your ENCOR v1.1 Experience

@Anonymous
congrat and can you please confirm the location and the language used in the exam?

how can i access the study materials especially the labs please help

@mimo please assist

Hi Lillyy
sure! you need to buy the Premium Member and that will give you access to all the materials.

Went today to exam, failed.
I had new 6 labs
Labs are almost identical to ones here, it appears VRF config was completly reworked….
You had to create int tunnel from scratch (No IPSec) but I was not able to get it running despite following this’s site config by heart … and this lab even crashed in my lab. I was not able to save config.
Another lab was Vlan root and LACP, I was not able to get it running, kept getting dtp erros on interfaces…. I do not understand how could I not get LACP to running despite labbing for weeks!
Could do OSPF Summ, NetFlow 1 and 2, BGP, Flawlesly
Most of questions on exams are still relevant, there are couple of new ones around 25% new questions.
Lot and lot of automatisation, XML, JSON, Python etc….. Cisco really punishes you for not knowing scripting.

If you are really not getting consistantly 95% atleast 5 times on dump composites, dont waste money on trying exam!!!

Thanks for sharing@ANetworkEngineer ( yes I took not out)
good luck next time

Anymore feedback on the scary new questions out there? Hoping to see some more posted soon. :)

Took the exam, confirmed there is 6 Labs that is here. Study Lab and Questions.

Next CCIE Enterprise LAB, is there site similar here that is really good reviewer.

CONGRAT CCIEnext
can you please confirm what labs you got (please make sure to use the lab names on this site because we have some similarities)? thanks

For the exam, there is 56 questions and 6 labs and we have to get 90% to pass CCNP Encor, right ?

@Anonymous
56 questions could be more or less depending on the exam, and there are 6 labs at the beginning of the exam. but the passing score is 82%.

Thank you mimo.

I’m going to take ENCOR on Nov 21st. Done with enough readings. Can somebody let me know what the recent changes on exam ? If we get the Premium member of this site, will get all the questions and lab access, which is sufficient to clear the exam ?

@Nishar
the last change is that the labs are 6 now at the beginning of the test and are all posted here. and they approximately 50 MC questions. The premium membership is sufficient to pass the exam. personally, I bought the 2 months just to be sure I have enough time to study. Good luck

I had attempted the exam yesterday and passed!

Total 58 Questions with 06 Simulations.

——————————–
Details are given below:
———————————
First LAB
———————————
VRF Configuration Sim
1. Extend the CORP VRF between R10 and R20 using Tunnel0.
2. Protect Tunnel0 using the preconfigured profile.
———————————
Second LAB
———————————
eBGP Neighbor Sim 2
1. Using the address-family command, configure eBGP according to the topology. Use Loopback0 for the router-id.
2. Advertise R1’s Loopback 0, 1, and 2 networks to AS 1 and AS 3.

THE AS numbers were changed as AS1, AS2 & AS3.
———————————
Third LAB
———————————
LACP & Root Bridge Sim
The Port-Channel were 10 instead of 11
———————————
Fourth LAB
———————————
OSPF Summarization Sim 2

Task 1. Configure OSPF according to the topology using these requirements:
+ Use Process ID 10.
+ Use Loopback0 for the Router ID.
+ Advertise all networks into OSPF.
— Do not use network statements under the OSPF process to accomplish this task.

Task 2. Configure a /17 summary route for Area 50.
———————————
Fifth LAB
———————————
NetFlow Sim
1. Complete the Flexible NetFlow Flow Exporter configuration on R1 to send data to the collector using UDP port 2055.
2. Configure the switch port analyzer on Sw1 and mirror all communication to and from PC1 to interface E1/1 using session number 11.
3. Schedule the pre-configured IP SLA operation on R1 to start running immediately and to run indefinitely.

IP SLA was 10 instead of 05.

———————————
Last LAB
———————-
Access-list & CoPP Sim
EIGRP is preconfigured on all routers. Configure R10 and R20 to complete these tasks.

Task 1. Modify the existing ACL on R10 so that EIGRP routes are received from R20 and R30.

– The modification should only allow EIGRP routes to pass.
– Do not remove any configuration from R10 to achieve this task.

Task 2. Configure CoPP on R20 to achieve these results:
– Permit ICMP traffic from 192.168.24.0/24. *
– Limit traffic to 8,000 bps.
– Discard additional packets.

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Apart from all this 31 Questions MCQs and Drag and drop were new which i got in latest file from another source.
Wishing you very good luck guys.
Looking forward for ENARSI.

Thank you Zafar for theses information. What’s the orther source you used to study the 31 News questions ?

Thank you for theses information. What IS the other source you used for the new questions ?

Hello @Zafar Iqbal
can you please let us know what is your source for these new 31 questions?
Maybe also @digitaltut can help us out there if there are that much new questions.

Thank you in advance!

@Anonymous & @Ban

We have informed the digitaltut team, they are going to update soon.

At the moment i can not inform you another platform details as i truly respect the terms and condition of this valuable website.

@Zafar
thanks for sharing and we appreciate your help. I don’t think @digitaltut minds you sharing any other resources here because we all are members already. to be sure you can post it under ENCOR v1.1 Questions – Part 5 so only the members can review but we don’t have much time to wait until they update and add these questions. thanks

Hello again @Zafar Iqbal
Much obliged and thank you for your help!
But i also have to agree with @Mimo, i think it would be ok to share it in the ENCOR v1.1 Questions – Part 5 since only Members can see it there.

Thank you in advance also to @digitaltut & @Mimo for support and info!

I would appreciate if Digital Tut would update the new questions as advised by Zafar. I have my exam booked for 14 Nov.

They announced at the Welcome page that they will update starting from question 72 in All ENCOR v1.1 Questions – Part 5

Can someone please confirm how many questions on the premium version and when the new questions will be added. I’m awaiting for the new questions to be added for taking the membership.. Any inputs would be really appreciated

@Nishar
the premium has 2 parts of the questions:
the new form 1 to 5 and there are around 100Qs each
the old from 4-11.
The new questions have already been added under part 5 of the new questions.

The exam format has changed and majority of the questions were based on Wireless, SD WAN, DevOps and most of it are not covered here. Labs are here. I would recommend to brush up on the above areas before you sit for an exam.

@VX were you able to check @Zafar’s telling questions in Premium part 5 ? and i hope you have passed the exam.

@VX how did your exam go? did any of the new question that was added under part 5 come out in the exam ?

For anyone who has done the exam recently, which area do you suggest most of the questions came out of? It is very difficult to find time to study off of 1000 + questions equally. In previous years there was 400-600 which was more manageable.

Passed the ENCOR v1.1, with total of 58 question and the first 6 were labs.
Got exactly the same labs as mentioned by @Zafar Iqbal.
Apart from the labs, my questions were many about wireless and automation.
Overall, I think maybe 10% new questions, aprox 60% part 1-5 and 30% part 4-11.
If you study, don’t only learn the answers, but also try and understand why it is the answer.
Good luck to you all!

Passed last night, 6 labs, same 6 as mentioned in comments. Good few of the new questions in 1.1 Part 5 came up. Might have been 1 or 2 new questions but if you learn 1.1 1-5 and 4-11, understand the concepts. Best of lucks. Thanks digitaltut for a great resource.

Congrats @Ted_ie

Appreciate your feedback! Thank you.

@Satu
Thank you for your feedback, as i got more questions from other sources hopefully team digitaltut will be uploading them too. even 10% will be cover by this site.

Thanks.

passed Encore yesterday 58 question the first 6 labs

@kk which lab was on your exam?

@ff i think pretty much every one is getting the labs that @Zafar Iqbal posted a little above, i have my exam on Monday 25th so ill post an update on what i get.

1000 question is too much… I am doing the recap of v1.0 …. I am now mixing questions.. :S

I just passed the exam.
5 Labs :
1- LACP & Root Bridge Sim
2- NetFlow Sim – The destionation under flow export was configured.
3- eBGP Neighbor Sim 2. You need to use address family ipv4 in order to advertise the prefixes.
4- OSPF Summarization Sim 2
5- VRF Configuration Sim – NOTE : The tunnel was configured but without VRF and it is not enough to add the ip route you need to extend the vrf all the way up to subinterface.

52 questions –
Hard to say from where…
But the majority of the questiones were about WIFI and Automation .
Only one about HSRP,another about VRRP
Few about SDWAN and DNA /SDA
Few about security products.
Few Drag and drop ( security,cloud and programming )
Advise read v1.1 and about v1.0 specially focus following parts : v1.0 9,10,11.
Read the right column as well.
Hard exam
Thanks to Digitut. 10 year using it and it is still a good resource.
AB

Congrat! AB

@mimo Thanks!

Did pass the exam! The labs are similar but just tricky. You will be mislead if you are not quite familiar with the CLI. As for the multiple choice, it was 95% brand new questions that i never saw from any of the sample questions here. Over all, still grateful that i passed. Thanks.

@AB-78 congratulations!

Regarding the VRF sim, to extend the vrf-
you need to basically reconfigure the sub-interface by adding vrf forwarding and the ip address?

95% of questions from outside of this 1000 questions on this site ?
Can you someone please confirm still its valid to go for an exam with this 1000 questions and 6-labs ?

Just passed the exam
So many ew questions
The laps are similar with some changes I got off summarization sim with /18
All the names are different on the lap so be careful not using the old names by mistake. Control plane lab was to go permit ssh from PC1&2 so you need to see their vlans and add them on two commands. Good luck friends. And thanks to Digitaltut!

@Hello_Again : Thanks mate.
About the vrf sim.
Yes . In the eve ng the vrf was added but in the lab it was not .. So I completely forgot that and I spent 15 minutes or more xD then I realised .. xD
About the questions I would say 90% are in this site.. But you need to learn not memorized…

@Karthik Yes you can. Check my post.
Yesterday I passed the exam.
T

One thing.. you cannot copy and paste….

@Mimo What do you mean about the CoPP LAB, in the digitaltut there are no vlans there included and no PC1 and PC2 are part of the CoPP LAB. Can you elaborate please ?

Passed exam

6 lab 58 Q
lacp-and-root-bridge-sim
ospf-summarization-sim-2 – /17 mask
ebgp-neighbor-sim-2
vrf-configuration-sim – vrf was not configured like in lab
netflow-sim-2
access-list-copp-sim