Share your ENCOR v1.1 Experience

yes

prep questions / tests / labs all in premium

@all
the result will appear after the exam or it will take couple days ?

result of pass or fail will appear after exam… you will get results on Cisco after few days

Hi anyone that just took the exam, are you allowed to save your configuration in the sim environment per task or save when all configuration is completed? Thanks in anticipation.

Hi All,
Took the exam on Today, passed.
Just go through all the v1.1 questions and all the old questions; and above all understand the concept being tested.
Same labs as always:
-VRF
-eBGP
-OSPF DR and Summarisation
-RSTP and LACP
Good luck everyone, my CCIE Lab journey starts now :-)

@Ibar : Can we skip the old questions ? or, there are too many of them appearing in the exam ?

@SD

it’s recommended by the site to also know old questions… recently it has been a few 1.1 but it’s same material w few changes so if you know 1.1… old questions are easy…

Passed the exam today. Most questions came from V1.1. Few questions came from V1.0. So please read all questions. Lots of automation snippets and wireless questions. Got 4 labs – VRF, OSPF DR/BDR, eBGP without address family and LACP sim.

Yes! Thanks digitaltut! Passed my exam today, 88q inc 4lab vrf, ebgp, lacp and ospf summ
Worth it! Last minute study!

All I have to say is Thank you digitaltut.

I passed my exam this past Saturday, with 84 questions and 4 labs, the same labs as stated by most who recently did the exam.

Multiple questions I think are from a pool of questions on this site, v1.0 and v1.1. I can’t remember any wireless question on mine compared to Nicky’s above, however, the question came from all the questions on this site with slight wording. Hence study all if you can.

For the sims, it is the same here apart from the LACP question, slight difference in the configuration error but the same concert. In the port channel, I couldn’t find anything wrong with the configuration, I then decided to ping but was unsuccessful. Did the configuration here start pinging, There must have been a slight error on that question.

All in all, passed and can only say thanks again DIGITALTUtttttttttttttt teams.

any update who taken the exam recently?

Starting My Study Plan for ENCOR ,,, Any recommendations for Videos /LABs beside Cisco Official Certification Book ?

how i can find exam lab Sim ?

@ am and Codex, subscribe to this site and study. ref some of the links in the questions; you
should be good to roll.

Thanks Digitaltut.
I passed today.
88q , 4 Laps(trunk UDLD and LACP,VRF,OSPF DR and sim,and BGP no address family)
all the questions in this website
What did i study?
V1.0, V1.1 and from Architecture questions to Drag and drop 2

Premium subscription is worthy .
Do not be afraid, just study these question and definitely bei god will you will pass

Hi – I appeared for the exam and i can say that i had 88 questions and 4 labs . Thank you digitaltut for the up to date labs , i was able to prepare all 16’sh labs and i could sing them . Then i studied many of the questions here , doing drag and drops , multiple choice questions etc. I noted that in the labs , i could not do copy run startup-config to save , but i had to do the wr command. So what were the labs : lacp , vrf ( here the tunnel was not having vrf Corp , Ospf -DR and lastly e-bgp. So 19 dollars spent here was worth it . So from here – i am now flying straight to Fortinet -Fortimanager exam prep . I wish all test-takers here on this platform best of luck !!

When does Cisco DNA Center make changes to a device?
A. when the device credentials are added
B. when the network device is assigned to the site and device controllability is turned on
C. when the network device is discovered and device controllability is turned on
D. when a NETCONF port has been configured

Which is correct ? B or C ?

When does Cisco DNA Center make changes to a device?
A. when the device credentials are added
B. when the network device is assigned to the site and device controllability is turned on
C. when the network device is discovered and device controllability is turned on
D. when a NETCONF port has been configured

I think B is the better answer

Dear 9tut,

Can i know where i can download the GNS for free?

I passed, 88 questions and 4 labs
VRF extend vrf on the tunnel interface and apply ipsec was already configured, all that was left was to apply it to the tunnel.
OSPF Apply prefix-list with filter list in and out
BGP identical to what is here
LACP

I believe that all the questions are on the website, for me 5 or 6 new ones appeared, but I took the composite test a few times.

Took the exam today and passed.

Labs
VRF (CORP vrf extend through tunnel)
EBGP without address family
OSPF DR with summary routes
UDLD with LACP

Just study the materials here. You will definitely pass the exam. Just focus more on automation and wireless. lot of questions came from those areas. Good luck everyone.

passed exam Yesterday….

Labs
VRF
EBGP without address family
OSPF DR
UDLD with LACP

new 4or five questions. more automation…

@AmidonwithLuv : DO you remember the new questions ? are they easy ones ?

Just recently passed the exam.
reviewed everything on this site.
practice the labs.

Thank you digitaltut!

Passed.

84 + 4
eBGP
OSPF DR/BDR(Sim2)
LACP + Spanning tree (with pathcost)
VRF was tricky (Vlan sides were also not in VRF)

2 or 3 Qs may be new.

@Digitut you are the best!

Could anyone please send me the question bank to amrsalemkassem(at)outlook(.)com
and also lab sim
thanks

ar you need a puy a premium membership

@DNSRoock did you see a lot of python/JSON /API or any other scripting questions?

@NICKo Not lot, may be 10-15 I would say.

@DNSRock Thank a lot for your reply, i am really struggling with parsing and interpreting JSON, python and other scripts.

Any update ? Any new questions in the exam ?

I passed the exam, 2 or 3 new questions in the exam only

84q – pretty even mix of 1.1 and old questions

Labs
eBGP Neighbor Sim – same lab but used different AS #s and IPs
OSPF DR BDR Sim 2 – same lab
Rapid PVST+ and LACP Sim same lab
VRF Configuration Sim – tunnels were configured. Missing vrf on tunnels and vlans. same lab otherwise.

Would have been nice if Digital Tut started removing repeat questions to cut down the size of the old sections as there is a lot of overlap between 1.1. and old Qs. Would have been a more focused study.

how many total questions in v1.0 and v1.1 combined? im planning to subscribe if the questions are less than 500

@MA , they are over 500 questions. Worth the buying!

@DI, do we get a vce file with all questions or we just use the site for studying ?

@Anonymous, Good point.

I hope @digital tut will take that on board and remove repeated questions to streamline the number of questions. Saying that you guys are still doing a GREAT job.

Hi, I done the exam today and passed.

Labs:
VRF (CORP vrf extend through tunnel)
EBGP without address family
OSPF with prefix list
UDLD with LACP

84 questions and 4 labs.

You must study here ! Practice the labs!

ENCOR v1.1 Questions – Part 1 unti Part 5… it is perfect!

Thanks digitaltut !

how many total questions are in the dumps ?

Hello there. I’ve done the exam today and passed.

Had 4 sim labs:
VRF (CORP vrf extend through tunnel)
EBGP without address family
OSPF with prefix list (in and out filtering)
RSTP with LACP troubleshoot

Mine were: 88 questions and 4 labs.
@bling – you must learn all of the questions, until you feel comfortable (All parts from v1.0 and v1.1 combined)

My ENARSI trip starts soon. Thanks digitaltut, you are the best!!!!

@anon

digtut HAS removed old questions in past but that doesn’t happen until there are changes… there havnt been any changes… old questions here still show up on test. so without having an insider it’s not so easy to just remove questions that are accurate and the basis of learning the current technologies. remember THAT when you are studying the required curriculum and sayin why so many questions.

Hi. Link to updated Qs?

Where I found (1-5 and 4-11) or part 4 to 11, what does it mean. I am new user any one help me where i found the questions and labs for this exam

did you guys really manage to learn all of the questions from old to new? already struggling with the old may brain is going to pop out.. new questions i got no problem getting above 90 score however for old i was getting below 90..

hi Digital Tut, if i susbcribe then will i get access to both v1.0 and v1.1 questions?
Please let me know
Thanks.

Can we use the “sh run” command during the simulation?

Passed my exam 09/09
Labs:
OSPF DR and Summarization
EBGP without address family
LACP and Root Bridge
VRF Configuration
I recommend to study part 4-11 of the reviewer. Lots of new questions related to wireless.

Thanks to my girlfriend, Pau.

just finished the exam an hour ago PASSED!!
a lot of new questions..
a lot of questions from OLD

For the SIMS
OSPF
EBGP
Tunnel
LACP and Trunk

Guys Study harder!!! its Difficult.. i thought im going to fail but still im thankful i passed..
NEXT Stop…. ENARSI.. Thanks

One more thing guys! make sure you know the drag and drop from OLD and NEW.. a lot of it showed up on my exam!! goodluck…

digitaltut, how long till the new questions are added to premium membership?