Share your ENCOR v1.1 Experience

“Someone presented in Monterrey, can anyone tell me which version the questions and the labs were from?

I have my exam tomorrow.”

@CELT2005, in this LAB its possible use TAB and ? to complete sintax

@Billy
Note:
+ The ENCOR 350-401 v1.1 exam include lab sims, multiple choice and Drag drop questions.
+ You can use shortcut command (like “int”, “no sh”, “conf t”…), “tab” and “?” in the simulations of the exam.
+ To get the new CCNP Enterprise certificate, you need to pass this ENCOR 350-401 exam (core exam) and one of the
concentration exam.

Hi All

Has anyone come across NetFlow SIM 1, 2 and Draft Version LABs in the exam?
Usually, everyone who has recently attempt the exam are pointing to the first few LABs on here.

Hi All,

Took the exam on Saturday, passed.
Just go through all the v1.1 questions and all the old questions; and above all understand the concept being tested.
Same labs as always:
-VRF
-eBGP
-OSPF DR and Summarisation
-RSTP and LACP

Good luck everyone, my CCIE Lab journey starts now :-)

Failed 20240716 JST

1.1 10%
1.0 80%
New 10%

Sim 3
vrf
LLDP is new sim

Good luck
Ebgp

just wrote my exam again today currently pending results

please study 1-5 and old 4 – 11 most questions are from the old exam

Labs:
eBGP Neighbor Sim
VRF Configuration Sim
Rapid PVST+ and LACP Sim
OSPF DR BDR Sim 2

ill encourage to go through all the labs though

got my results and passed.

Hi all,

Passed my exam yesterday, lots of questions from v1.1 and v1.0. Practice as many composite tests as you can, just to get used to answer the questions.

Labs included:
VRF Configuration
eBGP Neighbor Sim 1
OSPF Summarization Sim 2
UDLD & LACP

The key is to understand the labs and practice them in this website and in GNS3 / EVE-NG, as well as many labs of other topics to practice. As I said before, combine labs and tests.

Good luck for everyone who will take the exam in the next days.

@digitaltut Thank you for everything!!

Best regards

All the questions from the especific topics under “ENCOR 350-401 v1.1
Architecture Questions” all the quetions are found in the big composite quizzes?

THX all

@Billy Nelson

Yes, that’s correct and they’re individual under section.

Passed

50% Old question 50% New

4 LABS All in premium

Ebgp no address-family
Stp path cost
Vrf
Ospf summ

Thx digi

@Happy, “50% Old question 50% New” do you mean 50% from the old exam and 50 from the new exam or 50% completely new questions?

BillyHorton

Yes it is possible to use TAB , the labs work exactly like normal routers, although can be a bit slow , and the three windows can be dis-orienting

You have the Diagram, The question, and the lab window, and can only access one at a time on the page

Apsrt from that, the router images work as normal

Take your time on the first ones, and get used to the format

@vikman 50% question versión 1.1 and 50% versión old.
No New question.

Passed Exam today.
4 Labs eBGP neighbor (No Address Family), OSPF DR BDR, VRF, RAPID PVST & LACP (All Parts)
Be careful with AS number and IP addresses.
88 Questions, seen a lot of old questions from v1.0. 4-5 new questions.
Do the composite test as many as you can.

Thank you digi!

Passed Exam today.

Thanks Digitaltut

Labs included:

Rapid PVST+ and LACP Sim
VRF Configuration Sim
OSPF DR BDR Sim
eBGP Neighbor Sim

passed the exam
no new questions
4 labs all from the site One was about ospf one about eBGP and one about VRF

Passed! All questions from site and had about 3 – 5 new questions:
Could only remember two new questions:

Question 1
About OSPF network types – Select the correct compatible OSPF network types.

I can’t remember the OSPF combinations given but below are the correct combinations:

Broadcast to Broadcast
Non-Broadcast to Non-Broadcast
Point-to-Point to Point-to-Point
Point-to-Multipoint to Point-to-Multipoint
Broadcast to Non-Broadcast (adjust hello/dead timers)
Point-to-Point to Point-to-Multipoint (adjust hello/dead timers)

Question 2
Time-Based Access List Using Time Ranges
Did not get a time range LAB but got a multi-choice time-range question.

Can’t remember the actual question but as long as you know how to create a ACL and append the time-range configuration you should be OK.

Example Below
Configure time range ACL
1. That denies HTTP traffic on Monday through Friday between hours 8am and 6pm.
2. Allow UDP traffic on Sat and Sun from noon to 9pm only

!Create TIME RANGE
time-range no-www
periodic weekdays 8:00 to 18:00

time-range udp-yes
periodic weekend 12:00 to 20:00

Create ACL
ip access-list extended strict
deny tcp any any eq www time-range no-www
permit udp any any time-range udp-yes

Apply ACL strict
interface ethernet 0
ip access-group strict in

@Jacki Chan thanks for your input.
However its not very clear if its a lab or a MCQ you’re talking about?

Could you pleae add what labs did you get in the exam?
appreciate your help. Thanks

Passed! last 24th

88q mix v1.0 and v1.1, no new question

LABs:
– VRF Configuration Sim
-Rapid PVST+ and LACP Sim
-eBGP Neighbor Sim 2(without address-family)
– OSPF Summarization Sim 2

Thanks digitaltut!!

Passed! There were 6 or 7 questions that are not on digitaltut, these are the questions that @Jacki Chan wrote about. These are very old questions that I read in the old dump CCNP_350-450-dump-v11.2 (this dump has many questions that are not on digitaltut). I found this dump on certcommunity/org.

Passed:)

All from 1.1 (this time) + 2 new questions

labs:

VRF, LACP, OSP Prefix, BGP

Good luck everybody!

UPD: ACL and append the time-range configuration question had on my previous attempt

DIGI, thanks a lot for help!!! You are the best!

please share valid dumps..

bartsimphson @yahoo. com

Passed today.
there were over 7 new questions. 88 in total including 4 labs. and had a lab in my third question which took a while to load (over 2 minutes) and I thought maybe the system is frozen.

Labs were as follows:
Rapid PVST+ and LACP Sim
VRF Configuration Sim
eBGP Neighbor Sim (no address family)
OSPF DR & Summarization Sim

everything in the labs were changed. Make sure you guys are comfortable with the concept.
The Labs have a 10 years old format and have not improved an inch. (disoriented).

Like Digitut have mentioned that you should pass the big composite exam 10 times to be confident to attempt the exam.

I wasn’t sure if I am going to pass till last minute.
Good Luck all.

@digitalTut

About the new lab, do you sahve any updates about this?

@Mister M

Do you have details about this lab?

THX

Sorry – forgot to mention that the time-range ACL question was a multi-choice and not a LAB.

Passed today
4 Labs: BGP(no address -family), VRF, OSPF DR BDR Sim 2 and UDLD sims

All questions were from Digitaltut’s Version 1.1.

I went through Version 1.1 (Parts 1-5) five times
I went through all D&D questions seven times
I went through the lab sims seven times using EVE-NG.
Many thanks to Digitaltut and those who provided feedback here.

Just passed today. All questions covered in the composite quizzes.

Labs were:
-VRF
-eBGP
-OSPF DR (priority and point-to-point)
-RSTP and LACP

Basically the same as on this site with different OSPF processes & BGP AS numbers

I’ve just passed the exam now, all questions are exactly from here.
84 q + 4 labs:
-Rapid PVST+ and LACP Sim
-VRF Configuration Sim
-eBGP Neighbor Sim
-OSPF & Prefix-list Sim
show running-config and tab and ? is working in the lab.
both of copy running-config startup-config and write memory are working too
thank you digitaltut :) and good luck for all you guys

Passed, a few questions related to wireless I did not recognize but I only took the composite 14 times so maybe I just never received them. A lot of wireless stuff, was surprised how much I received, I was renewing my CCNP and figured it would be more R&S stuff.

Labs were
ebpg (no ip address family one) Exactly like the one here Had to use mask command when typing out a subnet mask for networks

VRF (Just steps 1+2 same IP’s)

PVST+LACP (Just like the one here)

OSPF DR/BDR (Exact as on here)

Passing the composite 10 times and knowing the labs should get you over the hump. I took the composite 14 times and passed 13 with an average of like 94%

Passed Exam!
it’s Kind of mixed Questions, 40% from v1.1, 30% from v1.0, 20% from (Architect Questions to Drag & Drop Quest) and 10% new.
LABS:
eBGP without Address Family
OSPF Summarization
UDLD & LACP
VRF
Thanks Allot to this community & Digitaltut !

I PASSSED MY EXAM YESTERDAY. I ONLY STUDIED V1.1 Questions. No old questions from v1.0
All Questions came from V1.1 Part 1

LABS
1. VRF Configuration Sim
2. eBGP Neighbor Sim
3. OSPF & Prefix-list Sim
4. Rapid PVST+ and LACP Sim

Good Luck People
Thanks @Digitaltut

Guys, I took the exam recently, study all the questionnaires contained, do the composite questionnaire several times, LAB cannot use it?. Pay attention to the context of the labs as different settings must be made than those contained in the dump.

Passed my exams two weeks ago. I studied both v1.1 and 1.0. Majority of the questions are in v1.1. Came across 3-4 new questions that are not on either versions.

LABS:
eBGP without Address Family
OSPF Summarization
UDLD & LACP
VRF

Thank you DigitalTut!

Passed Exam Today. Total 88 Question including the Labs. Around 5-6 new ones.
I studied both v1.1 and v1.0. I have done v1.1 and v1.0 around 5 times and took the composite 16 times.

Labs –
UDLD, Path cost & LACP
eBGP without address-family
OSPF Prefix-list & DR & BDR
VRF Step 1&2

Do the composite test as many as you can.

Thank you Digitaltut! & and good luck for all you guys!

Dear Freinds,

Can you please guide me, v1.1 questions and v1.0 questions are where in this site ?

I am new here.

Hello @Ruhail, you have to purchase a premium member in order to see or to participate those questions

passed my exam a couple of days ago, had some kind of new questions but they were from the topics covered in here. for example one that I remember was about sd-wan tunnel but instead of dtls, tls was in the answers.

Hi all – I’m taking the exam next week, where can I find the labs and solutions that we’ll be on the exam, I don’t see them any where on the site? Thanks all for the help!

Can somebuddy share me Encore Dumps. Waseem.178 @hotmail.com

Hi all, can somebody please share where we can access the labs from for the exam

Passed the exam yesterday.
Review V1.1 and V1.0 and all the questions under the specific topics of ENCOR 350-401 v1.1 at the right-side menu

Labs
UDLD, Path cost & LACP
eBGP without address-family
VRF

Thanks digitaltut!
OSPF DR BDR

Passed the exam yesterday.
Review V1.1 and V1.0 and all the questions under the specific topics of ENCOR 350-401 v1.1 at the right-side menu

Labs
UDLD, Path cost & LACP
eBGP without address-family
VRF
OSPF DR BDR

Thanks digitaltut!

@kris – where can we find the labs on this site. Sorry I’m new

@zzz – you would see it on the right side menu bar under Lab Sims for ENCOR v1.1

I have cleared my exam with a PASS 2hrs ago.

LABS.
VRF
UDLD and LACP
OSPF DR Point to Point/ and R10 DR
BGP without address family.
question from everywhere. Thank you 9tut you are the best

@anonymous is that only for premier members, bc I don’t see it. I only see basic labs and lab challenges on the top right

Passed ENCOR today. All questions and labs were from ENCOR v1.1 you can find here. This web is the best source you can use to prepare yourself for exam. And also best value for money you can buy compared to other training resources. Thanks digitaltut.com.