Share your ENCOR v1.1 Experience

@jkju Do you think the questions are new or from encor v1.0?

Hello,

Candidates who have appeared for this exam and got questions from parts 4-11, can you please confirm which parts of 4-11 did the questions come from? Almost every part of 4-11 has 100+ questions and that is lot to cover in addition to parts 1-5. Please advise.

yes, it look like more question from old questions. It’s 50 50 for old and new question.
Just study for new question is not recommended

Today I had second attempt. I passed. The questions were mix of v1.1 and v1.0. Study twice both version and old questions. I would focus on Part7 to Part11 at v1.0. Don’t forget to practice with Composite Quizzes. There were also new questions dns (new capwap join dns), ACL and Wirelles (SNR, RSSI). Thx digitaltut.
Now it’s time for Concentration exams. Which one would you choose to complete CCNP traject? I will chooise for ENARSI.

Hello everyone

Kindly assist with ENCOR dumps to mashimmbyelaw @ Yahoo. com. Thank you.

@pasha, pls assist with 350-401 dumps.. smartask_luv @ yahoo . com

please share with encor dumps.. etvdubai000 @gmail. com

please share with encor dumps.. etvdubai001 @gmail. com

Pasha congrats and do you remember the labs you got?

Passed today, most questions were from 4-11, only 15-20 questions from 1.1 1-5 and there were 6-7 new questions and a new D&D, Labs were
VRF
eBGP
OSPF DR/BDR
UDLD/Trunk/LACP
Thank you Digital Tut

I passed the exam yesterday, 90% of the questions were from part v1.1.

88 questions (4 labs), all is here.

LABS:
Trunk UDLD & LACP Sim
eBGP Neighbor Sim
OSPF DR & Summarization Sim
VRF Configuration Sim

In the labs you can use, tab and ?

Thanks Digitaltut

@Encore Passed

I appreciate your collaboration and detailts.

Those who have passed, kindly help a friend. share the dump pls: smartask_luv @ yahoo . com

FAIL TODAY

LAB: (In the labs you can use, tab and ?)
Rapid PVST+ and LACP Sim
VRF Configuration Sim
OSPF DR BDR Sim 2
eBGP Neighbor Sim

QUESTION:
40% ENCOR v1.1 Questions.
60% OLD Question.

Many questions about wireless.

@AMD4800

Sorry to hear. :(

Were all the old questions from parts 4-11 on this site? Did you prepare parts 4-11 for this test?

Thank you.

@neteng

Were all the old questions from parts 4 to 11 on this site? No
I think there were new questions too.

Did you prepare parts 4 to 11 for this test? Just review part 4,5,6,10 and 11 just once.

I passed the exam yesterday,
90% of the questions were from part v1.1.

LABS:
Trunk UDLD & LACP Sim
eBGP Neighbor Sim
OSPF DR BDR Sim
VRF Configuration Sim

88 questions with above mentioned 4 labs (140min)

Thank you very much Digitaltut

I passed the exam yesterday. But during the exam with Peason onvue, I encountered a problem. My mouse couldn’t move properly and my keyboard was slow to respond. This may be a problem with the onvue software. I reported this to the proctor but did not receive a solution. I used the tab key, space bar, and arrow keys to move between questions and answers. I found it difficult to do drag and drop and labs due to mouse stuck and it took a lot of time to complete 03 labs and drag and drop. I missed one lab because I don’t have enough time to complete it. I got 88 questions and 04 labs. 90% questions from 1.1 to 1.5. finally I passed.
Labs-
VRF configuration
OSPF DR BDR
EBGP configuration
Rapid PVST+ and LACP

Thank you very much digitaltite.

Thank you very much, Digitaltite..

@AKA
congrats, which SIM lab versions 1 or 2?

Unfortunately failed – just finished my exam..
Questions about 40% from v1.1 and 60% old v1.0 (4-11).
Labs are fine, no problems at all.. OSPF/BGP/STP/LACP.

Good luck everyone and thanks Digit team for the great work! That was enjoyable time during the preparation.

Approved.
Almost all the questions are here, I couldn’t tell you the percentage of version 1.1 or 1.0, I studied them all. I got 5-10 new ones.
The super simple labs! Exactly the same as here and even easier: VRF, BGP, OSPF and LACP.

Thank you very much tult, thank you for ENARSI.
Good luck to the rest

Can some1 help with dumps pls: {email not allowed}

Can some1 help with dumps pls: : abdulrahman.raimi0106 @ gmail . com

Hello,

I passed ENCOR exam today and recertified my CCNP.

I had 84 questions and 4 labs (total 88) questions in the exam.

All the questions I got were from V1.1 Parts 1-5.

I got following labs:

Rapid PVST + LACP Sim
VRF Configuration Sim
OSPF and Prefix-list Sim
eBGP neighbor Sim

I prepared V1.1 and old V1.0 questions, but only got questions in the exam from V1.1.

I did not see any new questions. I was able to complete all the questions and labs in around 1 hour and 20 mins. I had 40 mins left over when I completed the exam.

Thank you Digitaltut and all the candidates who shared their experiences and feedback from the exam.

Just pass the encor exam
84 questions + 4 labs
All the questions from v1.1
The labs are :
Vrf
Ospf dr bdr
Ebgp
Lacp

Thanks digitaltut

Passed the exam. 85 questions + 4 labs.
All the questions were from v1.1 Part 1-5 and the old question part 4-11. I found the EVE-NG extremely helpful for preparing.

Labs were:
Vrf
Ospf Dr bdr 2
Ebgp
Lacp
Thanks Digital Tut.

Please could you help with the answer here?

Question 60
Which solution simplifies management of secure access to network resources?
A. RFC 3580-based solution to enable authenticated access leveraging RADIUS and AV pairs
B. 802.1AE to secure communication in the network domain
C. ISE to automate network access control leveraging RADIUS AV pairs
D. TrustSec to logically group internal user environments and assign policies

My subscription has expired?

Dear @Anon and @Engine and @neteng congrats!
Just a quick question> did you study questions under the specific topics of ENCOR 350-401 v1.1 at the right-side menu?

Thanks in advance

@Busy Bee B

i just study part 1-5

Thanks for update Engine!

Passed. 84+4.

Labs: VRF, OSPF DR BDR 2, Rapid PVST+ and LACP, eBGP Neighbor.

A few new questions and a blend of 1.1 and 1.0.

There was a question about Link Management Protocol. Is it mentioned anywhere in the curriculum? i couldn’t find it.

Hi,

I took the exam yesterday but I don’t know if I have passed or not, I received an email from PearsonVue that said the following, “Click on the following link to log into your exam profile https://cp.certmetrics.com/cisco/en/login You will be prompted to log in before viewing your score report.”
But when I log in I don’t see any exam information anywhere.

Do you know where or how I can see it?

@Duck @Busy Bee

Thanks very much for the update and congrats on passing

Question, Where the Labs identical or was there different IP address’s

Pass. A lot of old questions. Study old questions also not only new. I think 50/50-old/new. Labs is actual.

Please share dumpsvibe.com dumps file

Please share ENCORE dumps to herman.declaro64 @ gmail.com
TIA

i seem not to get the link to subscribe for the PREMIUM CONTENT, who can help?

@a m u t u a 17 at g m a i l

simple go to the top right side of this page and signup it will take you to the subcription page

recent
update:

about 70% old q – very little new v1.1 – labs r ok
pls study all
negative result

@a m u t u a 17 at g m a i l

https://www.digitaltut.com/member/signup

https://www.digitaltut.com/member/login

@Busy Bee B what labs did you get’?

Those who have passed, big congrats. Pls help a friend. share the dump pls: evoltadobe @ gmail . com

@tecg

As always VRF
udld modified ( not all tasks)
ospf
eBGP

Good luck

Passed

Labs:
ebgp,
OSPF with summarisation,
trunk udld

Questions were a blend of new and old…some new questions not here on this site..around 5-6

PASSED

Came lots of old Questions.Labs are same with different requirement in tasks

RapidPvst+ and LACP
OSPF DR and Summarization
eBGP
Vrf Configuration

Thanks be to god, I’ve done it today. It got some time to update it in the person portal but it was straight up in the CISCO portal. 84 questions + 4 sims.
There are reasonable number of new questions. There is a drag and drop type questions that has cisco umbrella, securing DNS, something AMP related. There was a time based ACL related MCQ. There was a debug capture that has icmp related MCQ. Roughly there are about 10- 15 new questions. Have a good understanding about ACLs. Lots of questions from SD-Access / LISP.
Rest are from digitute. A mixture of old and new. Noticeable numbers of old questions. Jason drag and drops were there. Haven’t got the labs until 70’s as I remember. Thanks for digtute.
Labs are same.
1- VRF – no source interface and destination ips. Didn’t ask for static routes. Asked to apply the IPsec profile.
2- UDLD & LACP – without UDLD but asked for Configure spanning tree on SW 10 to support 32-bit value
3- BGP neighbor – As numbers are different.
4- OSPF Summarization on ABR routers. Log into area routers in area 10 and 20 and check the advertised networks. You can summaries to 10.1.0.0 and 10.2.0.0
Good luck.

@9tut it is true about New questions ?
Case ia true, when Up date dump ?

@Billy Nelson
good point. I have noticed some new dnd about automation
Lets wait for kind update

@SL Boy in AUS I had exactly the same exam…no udld, no static route, area summary 10.1.0.0/16, 10.2.0.0/16,spanning tree on SW 10 to support 32-bit value, the questions you mentioned…All same.

Did lam last week

Five labs were:

OSPF Summarisation, UDLD / LACP , VRF, eBGP ( no address-family) and eBGP Advertised, Summarised

The labs were exactly the same apart from:

UDLD / LACP had parts 1,2 and 5 only

Summarisation used /17 ( 255.255.224.9 ) rather than /18 (255.255.192.9)

Apart from that, labs were EXACTLY the same

Questions were 70 % 1 – 5, 25% 4-11 and 3 – 4 I did not see in DIGITALTUT

Fantastic site, have used since TSHOOT days, always perfect , Thank you again DIGITALTUT