Share your ENCOR v1.1 Experience

how much of the exam consists of wireless questions?

CCNP cert expiring in a month. Has anyone been able to prepare 500+ questions in a months time with full-time job? Any tips on what parts to concentrate on?

Passed the exam today. Thanks alot @digitaltut. Most of the questions were from the ENCOR v1.1 (about 70%) but it had some of the old one aswell.

Had the following LABS slightly modified.

– OSPF DR BDR Sim
– VRF Configuration Sim
– eBGP Neighbor Sim
– Access-list & CoPP Sim
– Trunk UDLD & LACP Sim

good luck to anyboby else.

@novox

great job on the pass!
do you remember what kind of questions were from 4-11?

Hi, I have some .pdf document, but it’s not possible to paste here link, can somebody who pass the exam make a quick review if it’s valid? just leave the discord id or teamspeak id and I will ping you. Thanks

Thanks Digitaltut. Passed the exam. But there were some new questions and couple of new sims as well.

@Apk What were the new sims based on? Which topic?

please confirm if this is a lie or not.
i have exam in 3 days and would like to reschedule if there are many new questions in the pool.

@Apk
How many new questions and what about labs?
When you refer to something, justify it.

Is it enough to practice ENCOR v1.1 1-5 to pass the exam ? i am going to take in few weeks.

Any update of the exam ?

Passed the exam last week.

I found some new question around 10 – 15 Questions. Can’t remember details.
The rest are exams from ENCOR v1.1 and little of part 4-11 (about 10 Questions).

5 LAB as below.
VRF Configuration Sim
OSPF Advertised & Summarized Sim
VTY Login Sim
Trunk UDLD & LACP Sim
eBGP Neighbor Sim

Lab sims is valid. Please practice all lab sims v1.1

I took 2 weeks to read and practice exam ENCOR v1.1 and part 4-11.
Goodluck guys!

Big thanks to Digitaltut!

ENCOR Part 4-11 have some question in the exam.
I recommend to read it.

some guys here claim that they saw new questions but we haven’t heard any official updates from you regarding this. please confirm if it is true or not.
i have my exam scheduled this friday and would like to rebook until the new questions are posted here.

Passed the exam 28/5/24.

I found some new question around 15 Questions. Can’t remember details.- However very simple if you have studied enough.

The rest are exams from ENCOR v1.1 and little of part 4-11

5 LAB as below.

VRF Configuration Sim(Tunnels source, vrf forwarding not defined)
OSPF DR and BDR
VTY Login Sim- configure passwords for auxiliary port, encrypt the passwords, configure ssh access only
Trunk & LACP Sim
eBGP Neighbor Sim- dnt use address family

Lab sims is valid. Please practice all lab sims v1.1

Big thanks to Digitaltut!

some guys here claiming that they saw new questions.
please verify if it is true or not and update the new questions to this website.
I am taking my exam 5/31 and would like to reschedule if there are new questions added to the pool.

Passed today.
All questions were from the site !
89 Questions + 5 Labs
Labs
LACP
eBGP
VRF x2 Labs
OSPF Lab
Good luck to everyone!
Thanks Digitaltut!

Pass today, 5 LABS
-VRF
-OSPF
-EBGP
-TRUNK LACP
-EIGRP ACL & CoPP

Like 5-6 new Qs, not big deal.

Good luck!!!

how many questions in total on 1-4 and 5-10

hi trying to give exam in 2 days, how many questions to study in v1.1 and old – , is it good to get the premium, pls advise.

Just took my exam today.(5/31)
I saw plenty of new questions (at least 30 i would say) that i have not seen on this website.
Probably only about 50% of the questions were from this website.
This is coming from somebody who thoroughly covered 1.1 part 1-5, and also 1.0 part 4-11 preparing for this exam.
I cannot remember in detail what kind of questions, but all of them were multiple choice.

Drag and drop questions were valid.
SIM questions topologies were the same, but tasks somewhat slightly different.
(For example, I had LACP Sim, but instead of configuring a trunk port, it had a missing vlan assigned to the port)

I have not received my official score yet, but based on my pending score i think i FAILED.
@digitaltut please update the new questions or at least inform other users on the website regarding this.
it’s not fair on us premium members.

Please confirm if there are really significant number of new questions and SIMS? Taking my exam in 3 days, need to decide if it needs to be rescheduled. Thanks!

@WARNING TO EVERYONE NEW QUESTIONS!!
You said you prepared v1.1 part 1-5 and v1.0 part 4-11,
did you also learn questions under the specific topics from “Architecture Questions” to “Drag Drop Questions 2” considered as v1.0 part 1-3? Just to make sure if the 30 new questions come from here.

Quick update.
I checked my score report i somehow managed to PASS.
but it’s not the point i am making here. there definitely has been a bunch of questions added to the pool so let’s wait for digitaltut to update them.

what kind of new questions were there if you remember? what topics?

what sims did you have?

Anyone took exam and find new questions?

Hi team – just to remind you that there’s a new set of questions in the exam.i studied all the questions from all the parts and versions here and went to write the exam .I found more than 30 new questions and the labs remain the same .so I knew I would fare very bad there and I had knowledge of all the parts ,so I tried my best ,but I want to confirm what others said here -new questions are there

@APJJ
No, I only covered v1.1 part 1-5 and v1.0 part 4-11. I cannot go through the specific topics you mentioned as there are many, and also because I have finished my exam. But isn’t v1.1 part 1-5 and v1.0 part 4-11 enough to pass? My apologies if there is any confusion.

New questions(or ones that I haven’t seen before) were about virtualization and ACL.
But please that my memory may not be fully correct.

Sims were eBgp, LACP, OSPF summarization, VRF

Do you remember what topics the new questions were about?

Hello,
Can anyone share ENCOR latest dumps on suhamjad @ gmail . com?
Many Thanks.

Hello colleagues,

I just finished the exam few minutes ago.
So, there were like 10-15 new questions that I did not find here.

I had 5 labs with slightly changes:
– OSPF DR BDR 2
– VRF
– LACP – PVST+
– eGBP
– ACL & Copp

Many thanks!

Congratulations!

did you learn questions from “Architecture Questions” to “Drag Drop Questions 2”?

Hi,

It take sometime to review and deliver the final result, but I passed :)

Yes, I have study everything, even from “Architecture Questions” to “Drag Drop Questions 2”.

Good luck for the next!

Hello,
I did exam recently.
Just couple new/modified questions.
Pretty much all Q’s from this site , all parts.
Small changes in labs, but still same labs.

Just took my exam today. My results are pending so ill update what my score is.Labs were vrf, acl copp (configured telnet,not icmp and ospf not eigrp,), ospf&prefix list, ebgp (no address family), rapid pvst & lacp. I had no new questions which was surprising. All questions came from 1.1 while I didn’t have any new questions I suggests studying both old and new questions and the architecture questions and others on the side of the page.
It’s a random test lottery. Some get no new qs, some get a few and some get alot.
I spent more time than I like on the Sims. In prefix list Sim i could not remember the command to put the prefix list in or out. I spent 15min on the sim figuring it out (router ospf 1 > area# filter-list prefix pre_fix in/out)For vrf I could not ping the vlan subinterface for the last task for the route.
Subninterface was in the config but I might have missed something, not sure. Know ALL Sims so you don’t spend too much time on them. Time will go by too fast if you are not quick. Even if you can’t answer everything in the sim put down what you know and save your work. Its better to get partial credit than no credit.

Thanks digitut, passed the exam. Almost all wee in here. In fact I got 100% per section more than half of the total sections , the rest got 90+%. Sims had slight changes like in opsf summarization instead of /18 mask it changed into /17.

@neteng : answering your question: No.. its impossible to prepare the WHOLE CCNP in a month. Don’t even try because you eventually will feel frustrated

@Passerby How many were new questions? What are the labs you got?
Is it true that you don’t get the results immediately?

Passed.
5 Labs
vrf (just like sim here)
acl copp (configured telnet and ospf, not icmp ssh or eigrp,)
ospf&prefix list (just like here)
ebgp (no address family)
rapid pvst & lacp( just like here)

No new questions, all from 1.1

And BTW for sims, there are complete CLI’s as it is integrated complete IOS in browser window.

TAB and ? are working. Copy/paste not working.
Be careful with ACL/Prefix names.

Hi everyone, I just had an exam today. How long does it take to know the score of infrastructure section after the exam date ?

In the exam, many people are talking about changes in the labs.
(1) configure spanning tree on switch to support 32-bit value.
What are the commands for this?

PASSED!
Around 90% are from v1.1 part 1-5, the rest from old questions and maybe 2-3 new questions!
5 LABS:
OSPF (DR BDR sim 2)
eBGP Neighbor sim
Trunk UDLD & LACP
VRF Configuration (missing destination version)
VRF Configuration (missing vrf forwarding command version)

Goodluck everyone!
Thanks digitaltut!

@anon I think there were no new questions, all are in here. After the exam you will know right away if you passed or not. Then I think less than an hour I was notified via email that my score report can already be viewed w here you can see your grade per section.

Labs I got
-trunk udld
-ospf dr
-ospf summarization
-ebgp
-vrf
–

I got the answer for my other question. It was hidden in these labs.
@Anonymous Thanks for getting back.
During the exam, can you mark & skip a question to come back later, before the exam ends?

can I know the difference between Encor1.1 and part 4-11?? am new to this site. plus do I need to premium to have access to both Encor1.1 and part4-11??

@Anon, hey buddy, no, you can’t mark neither skip questions. You need to answer the question first and move to the next one. For the score report, usually you receive a preliminary score report, which Pearson / Cisco will validate and update the site. This can take up to 48 business hours (if I’m not wrong), but usually it’s very quick…

@anon you cannot go back to a previous question during the exam

@TL 1.1 is the latest version while 4-11 were from the old version. Most of the questions during the exam came from 1.1 and there are a few from 4-11
You have to be a premium member to access these where you can also take quizzes to test your learnings.

@Anonymous What are the 2 VRF labs? There is only one here..