Share your ENCOR Experience

Hey Anibymous where can I find the file you are talking about? I have my exam in 2 days please share a link or file

@Digitaltut
Alot of people will search another resources and websites that are not authorized to find the new questions to take the exam .so please update as fast as you can

@testtakers – just remember people like Anon and others before advertising dump files they use to pass are FAKE people and generally dont care if you fail.. just your desperation is needed..

remember there are people in last WEEK saying 5-6 new questions NEW…which is NORMAL update cisco does – this is not that much and would only mean small diff in score if you miss… keep studying

@Digitaltut, it would be better if you could add some new questions than none since last week. Whatever questions you have confirmation as new, please at least add those. It will help at least reduce the gap for those who are taking exams very soon.

pretty sure IF the site HAD a REAL confirmation of the NEW questions they would add IF they could.. right now as the process (USUALLY is).. people study via some method… then they take test and then they come back to where they study (why this site is soo popular) and they let people know some of the new questions they see.. the site has their own way of confirming as well.. it takes some time to get this info… it doesnt just pop up in an email to Cisco students!

sometimes people who DONT study freak out and say there are new questions when in fact they just dont know the material… and they are the same questions..stupid people.. you can they dont remember any questions… people that KNOW the material can remember and often tell you the new question encountered

where do YOU think this stuff comes from ? they said they are working on it… you put them up here if you know how to get em faster

please dont put up rush questions because people are freaking out.. please properly vet the questions the normal process.

i prefer accuracy OVER anything questionable because people need it rushed right now

@TO better add than none,
not asking to rush the questions, read the above comment again “Whatever questions you have confirmation as new, please at least add those”
there are real people whose certifications are in limbo and they need to reduce the uncertainity gap as much as possible. Something is better than nothing.

pretty sure IF the site HAD a REAL confirmation of the NEW questions they would add IF they could – people have only been asking for days NO?

so then why keep asking same question differently?

they did also say they were working on it..

this is the freaking out part… relax. breathe..

update will be here shortly. I dont think site caused issue so why rush normal processes

PLEASE DO NOT SCAMMED HERE WITH MALICIOUS WEBSITES INFORMATION! THANK YOU!

Anyone sat the exam today, how may new questions?

Any one take the exam today? Please share your experience?

Hello friends. Just to let you know I ve just finished my exam literally 5 minutes ago. Everything here is absolutely VALID still. I didnt notice but may be 1 or 2 different questions from here thats all. So dont pay attention to what s been said about exam changed etc. Make sure you test your knowledge again and again and again using all questions here. I started getting 98 or 99 % on the composite quizzes. I got 91% on the test. I just felt its my responsibility to inform you all.

Also a BIG thanks to digitaltul for setting up this wonderful portal. keep it up

Could you share your dumps

thanks for update UKSYED

@UKSYED
Are the questions you get at the exam same as in digitaltut ? Or the questions has some different? And in which region did you het the exam?

@Digitaltut
Note (a19th-Oct-2021): The exam is still the same and our questions are still valid. We are very sorry for the wrong warning last week about the change in the exam.

Alot of people here post new questions here what about these questions , and another said that they face new questions about 30% ???
What about that???

HERE THE QUESTIONS THEY SAID ABOUT
463. How does a router behave when configured with the default DNS lookup settings, and a URL is entered on the CLI?
 A. prompts the user to specify the desired IP address.
 B. initiates a pinfsfg request to the URL.
 C. continuously attxempts tos resolve the URL until the command is cancelled.
 D. attempts to query a DNS server on the network
Correct Answer: D
464. What does a router do when configured with the default DNS lookup settings, and a URL is entered on the CLI?
 A. initiates a ping request to the URL
 B. prompts the user to specify the desired IP address
 C. continuously attempts to resolve the URL until the command is cancelled
 D. sends a broadcast message in an attempt to resolve the URL
Correct Answer: D
478. Refer to the exhibit. Router BRDR-1 is configured to receive the 0.0.0.0/0 and 172.17.1.0/24 network via BGP and advertise them into OSPF are 0. An engineer has noticed that the OSPF domain is receiving only the 172.17.1.0/24 route and default route 0.0.0.0/0 is still missing. Which configurating must engineer apply to resolve the problem?
 A. Option A
 B. Option B
 C. Option C
 D. Option D
Correct Answer: D
480. An engineer is implementing a Cisco MPLS TE tunnel to improve the streaming experience for the clients of a video-on-demand server. Which action must the engineer perform to configure extended discovery to support the MPLS LDP session between the headend and tailend routers?
 A. Configure the interface bandwidth to handle TCP and UDP traffic between the LDP peers
 B. Configure a Cisco MPLS TE tunnel on both ends of the session
 C. Configure an access list on the interface to permit TCP and UDP traffic
 D. Configure a targeted neighbor session.
Correct Answer: B
482. Refer to the exhibit. A network operator is attempting to configure an IS-IS adjacency between two routers, but the adjacency cannot be established. To troubleshoot the problem, the operator collects this debugging output. Which interfaces are misconfigured on these routers?
 A. The peer router interface is configured as Level 1 only, and the R2 interface is configured as Level 2 only
 B. The R2 interface is configured as Level 1 only, and the Peer router interface is configured as Level 2 only
 C. The R2 interface is configured as point-to-point, and the peer router interface is configured as multipoint.
 D. The peer router interface is configured as point-as-point, and the R2 interface is configured as multipoint.
Correct Answer: B
483. What occurs when a high bandwidth multicast stream is sent over an MVPN using Cisco hardware?
 A. The traffic uses the default MDT to transmit the data only if it isa (S,G) multicast route entry
 B. A data MDT is created to if it is a (*, G) multicast route entries
 C. A data and default MDT are created to flood the multicast stream out of all PIM-SM neighbors.
 D. A data MDT is created to allow for the best transmission through the core for (S, G) multicast route entries.
Correct Answer: D
484. AN engineer is implementing MPLS OAM to monitor traffic within the MPLS domain. Which action must the engineer perform to prevent from being forwarded beyond the service provider domain when the LSP is down?
 A. Disable IP redirects only on outbound interfaces
 B. Implement the destination address for the LSP echo request packet in the 127.x.y.z/8 network
 C. Disable IP redirects on all ingress interfaces
 D. Configure a private IP address as the destination address of the headend router of Cisco MPLS TE.
Correct Answer: B
490. An engineer configures GigabitEthernet 0/1 for VRRP group 115. The router must assume the primary role when it has the highest priority in the group. Which command set is required to complete this task?
interface GigabitEthernet0/1
ip address 10.10.10.2 255.255.255.0
vrrp 115 ip 10.10.10.1
vrrp 115 authentication 406630697
A.
Router(config-if)#vrrp 116 priority 100
B.
Router(config-if)#standby 115 priority 100
Router(config-if)#standby 115 prompt
C.
Router(config-if)#vrrp 116 track 1 decrement 10
Router(config-if)#vrrp 115 preempt
D.
Router(config-if)#vrrp 115 track 1 decrement 100
Router(config-if)#vrrp 115 preempt
Correct Answer: C

@Sally, answer is Yes, I took exam in the UK

Any one else get the exam yesterday or today? If the questions are same or there are new questions?

lol just because SOMEONE in a forum says there are new questions doesnt mean they arnt sales people lying to you or some student who “THINKS” they know the material and fails to remember anything… this is the common reality day to day here as i said b4… students always seeing a dump file from anonymous or mark or suky… and then some questions from the dump like you posted 2x… but where did YOU get those questions from? a dump file that isnt tested by group of students who actually sit the test? or even worse from some sales guy who cant teach you anything about the questions he sold you?

best thing anyone can do is actually buy the premium here and learn the material.. you should do that and think about who the source is you are counting your eggs with.

you keep copy and pasting… read the 1st 2 questions you posted and tell us what you think about you posting those questions repeatedly… since you didnt read it and just reposted it… try answering your own questions.

also recommend buying premium and studying — it might help you figure out what you are missing on the other questions you keep asking if new or not..

Hi Remy

good thing your posting a link so desperate people who dont care about actual valid questions can grab your file! how much CUT do you get out of your advertising? do you feel guilty causing people like Sally to be confused? too bad they will be like her and cant tell the difference between good questions and old meaningless garbage you wouldnt feed your dog!

@Tosally
Be in your self

@Sally: We checked them but they are not the questions for the ENCOR exam so don’t worry. In ENCOR we don’t learn about MPLS TE or MVPN.

Hi all!
who passed the exam, how many percent did this dump get?

Hi guys,

Will take the exam next saturday, I will get back to you with some information about it. But as per digitaltut said (19th) on the premium page, there is no new questions.

Stay focused on the concepts, get to know the material, don’t memorize, you have to understand what you choose as answer.

Use digitaltut material to test your understanding and you will PASS!

funny how these SCAMMERS all let EVERYONE AT DIGITALTUT know they HAD TO PAY FOR dumps from elsewhere BUT POST HERE EVERYDAY SAME LINK hoping YOU will do SAME – SAME COPY SAME PASTE – SAME GARBAGE – EVEN IF they get their spams posts deleted! laughed at! THEY ARE basically proven worthless everyday!

Dont click links or waste your time at these unproven dumps! you are HERE for a reason – you dont get support there! and questions are DUPES and in wrong categories like SALLY showed us! click at your OWN risk… you have been warned repeatedly.

I just passed my test. I would like to thank DIGITALTUT for their awesome job. Their dumps are still 100% valid.

@digitaltut
the new questions 463 ….490 that somebody published were not in the test at least here in the USA

thanks for the confirmation update @EnoughFake!

@EnoughFake
Are the questions same as Digitaltut or there are any changed?

@Sado
The questions are the same with some occasional changes

Thank you again to Digitaltut

@Passed
I asked about if the questions in your exam were sama as Digitaltut or there are some differences?

These Premium dumps are still 100% valid.

@Nero.

what do YOU think when you ask a question like that? are dumps same? NO

seriously,, do you guys actually read? I know its hard to tell with scammer s like tiphanie or anon always posting fakedumps but comeon… testtakers say EVERYTIME digitaltut is VALID … ones who fail dont prep

question xxx might not be written word for word

KNOW the material and trust the responses — people that dont do the studying fail and say the questions are changed… but that is not reality.. its because they failed to prep.. prep and you will be ok. do full composites 10+ times you will know material. 500 q is not easy but can be done with discipline.

Passed yesterday. Though still final score is not known yet. Thank you digitaltut. All questions are valid.
Only i think 2 questions which i did not see before came. One i remember was routers LONDON NEWYORK port-channel configured using interface range command on LONDON and mode Active was configured on LONDON. However the output for NEWYORK was showing as configured as PAGP. Options included to configure interface range with modes option passive/ON/auto etc. So i selected Passive as other side was Active configured.
Dont remember exactly the other question, but i did not see that before here.
Drag and Drops, some of the questions were shortened. like instead of 6to6 they gave options of 3to3. But all valid from here.
Thanks again digitaltut and all contributors here.

goodjob and great update!

dears,
digitaltut pdf has different answers than web site, which one to use

@ See ya all in 3 years time
Any changes in Drag and Drop??

I passed the exam! thanks to the admin. 95% of the questions are the same. read and submit! Good luck!

@Jack.. 5% new questions???

read man.. jeez god help you when you in the test and the answer just like the 2 you just asked ARE ANSWERED ALREADY RIGHT IN FRONT OF YOU

Hi guys, i taked exam and PASS , all question (101) from here except (2) question:
1. Escenary SWA and SWB with same config in channel-group 5 passive , and the question is why the links is not UP (Alternative, Enable Mode On en SW B, Enable LACP Switch A, an other two
2. Second question about VRRP config complete command for do device take rol primary.

BEST LUCK GUYS.

@ MR-ROBOOT
Can you explain more details about these 2 new questions

@Digitaltut
Please try to update with these new questions

I’ll be taking mine in a couple of hours. I’ll try to update you guys later if I encounter new question(s).