Share your ENCOR Experience

Hi Friends,

Any once could you please do share the latest dumps

studyram8 at gmail dot com

Question-
How does a router behave when configured with the default DNS lookup settings, and a URL is entered on the CLI?
A. prompts the user to specify the desired IP address.
B. initiates a pinfsfg request to the URL.
C. continuously attxempts tos resolve the URL until the command is cancelled.
D. attempts to query a DNS server on the network.

Answer:???

Hi

Please share the file Encor_Mar_2021.pdf

Hi Friends,

Any once could you please do share the latest dumps, i need to complete my exam before this month end. please do the needful.

studyram8 at gmail dot com

Any chance to extend the exam date, because in my state already lockdown in place, hence any luck, cisco will extend our exam date ?

@everyone, Find the answer to your questions or pay the premium for access to the questions. It is really very simple.

Passed today with 9xx, some of the questions and answers were worded in a different way. so be careful. I advice you pay the premium, study and quickly write.
Thanks Digitaltut.
All the best.

Hi

Please share the file Encor_Mar_2021.pdf

Hello everyone,
To all the premium subscribers, just wondering what do you get with premium? Do you get the same pdf questions from the FAQ question or different ? Also it is going to be just a pdf or vce file ? Or a test engine similar to the exam. Also how many questions will we be there in premium ? Please let me know. Thanks !

@Ahmed it is all there for you to read

In order to fully prepare for the ENCOR exam, you need to learn:
+ All the specific topics under “ENCOR 350-401” category at the right-side menu.
+ The New ENCOR Questions – Part 4
+ The New ENCOR Questions – Part 5
+ The New ENCOR Questions – Part 6
+ Pass the Big Composite Quiz (posted in the Composite Quizzes section) at least 10 times.

Why would you need a pdf too difficult to learn with, no need for vce when they provide a test engine. Does not cost a fortune to find out

Passed today with 9xx.
Dump is valid, 100%
Thanks Digitaltut.

What is a requirement for an Ansible-managed node?
A. It must have an Ansible Tower installed.
B. It must have an SSH server running
C. It must support ad hoc commands
D. It must be a Linux server or a Cisco device

which one is the correct answer ?

@John, so if you look at the question, it is talking about Ansible “managed” node… Meaning the node that Ansible will control or manage during the Playbook execution…
The Only requirement on the managed host is that it should be SSH enabled device, so it must be running a ssh service or deamon. Answer is B.

John

Ans : B. It must have an SSH server running

@John @test Paying for the premium will get you the answer. Everyone wants a free ride

@Rubberband thank you so much, i was not understanding this question.

Hey guys,

today I passed with 953. Dumps are valid

@hmmm

Could you please tell us which dump u r referring.

Passed !, just do big composite quizzes several time, read part 4,5,6 on premium ,read and understand the explanation on quizzes carefully, and you’ll be ok. ( don’t waste your time for free dump, ) Let’s support this site, .thanks digitaltut and all of your info for this sharing experience session..

Passed. Make sure you understand the technologies and read the questions carefully. There are some new questions on the exam that are very similar to the ones on this site, but the answers are different.

Passed today with high score 😊. THANKS alot to digitaltut team 🙏.

Hi friends

Does anyone know how many new questions there are? They told me about 17 new ones came, someone who took the exam on Monday.

Thanks!!!

Hi @Inspired
6. Which design principle should be followed in a Cisco SD-Access wireless network deployment?

A. The WLC is connected outside of the fabric
B. The WLC is part of the fabric underlay
C. The access point is connected outside of the fabric.
D. The WLC is part of the fabric overlay.
Correct Answer: A not D refer https://itexamanswers.net/question/which-design-principle-should-be-followed-in-a-cisco-sd-access-wireless-network-deployment

@lalacraft buy the premium. If we give out answers that we pay for, the site minus well be free. @inspired I hope you do not answer the question and encourage others to pay for the premium

@Anonymous,

Congratulation..

I have to pass this exam, as soon as possible..

May I ask you to share a valid dump for this exam on
Hasan_elashry@yahoo.com

Many Thanks for your help

Hi

Please share the file Encor_Mar_2021.pdf

Question-
How does a router behave when configured with the default DNS lookup settings, and a URL is entered on the CLI?
A. prompts the user to specify the desired IP address.
B. initiates a ping request to the URL.
C. continuously attempts to resolve the URL until the command is cancelled.
D. attempts to query a DNS server on the network.

Answer should be D

Hello everyone Im writing this from LATAM, PASSED today my exam.
90x/1000 SCORE, minimum 835.

Every question on the site is correct, but sometimes on exam Cisco changes some words, be careful. I watched some like 8-10 new question that does not appear on this site.

Best Regards!!!!!!!

Passed the exam today 93X/1000 all information required over here thank you digitaltut, please keep supporting this plattaform 3 new questions.

95x/1000 passing was 825… I just passed a day before my premium expires , couldn’t be any happier! thanks 9tut and family.

I passed the exam today! Thank you digitaltut. I only encountered 2 new questions (one is about London and New York routers active passive relationship and about Type 2 Hypervisor). The rest are in the premium. Don’t forget to get the premium and study from there. Thank you again!

An engineer is configuring GigabitEthernet1/0/0 for VRRP. When the router has the highest priority in group 5, it must assume the master role.
Which command set should the engineer add to the configuration to accomplish this task? interface GigabitEthernet1/0/0 description To IDF A 38-70-774-10 ip address 172.16.13.2 255.255.255.0

A. standby 5 ip 172.16.13.254 standby 5 priority 100 standby 5 track 1 decrement 10
B. standby 5 ip 172.16.13.254 standby 5 priority 100 standby 5 preempt
C. vrrp 5 ip 172.16.13.254 vrrp 5 priority 100
D. vrrp 5 ip 172.16.13.254 255.255.255.0 vrrp 5 track 1 decrement 10 vrrp 5 preempt

@Hi Digital tut @ENCOR It is quite obvious that you two have no intentions of taking the exam. If you cannot pay for the premium how can you pay for the exam. Have a little respect for the people who do pay and spend their last dollars to ensure they pass the exam. If you save $5 a week for a month you can afford the premium. That is what I did. Join the premium member family and I can vouch that you wont be disappointed.

Analysing the answers as the devices are using VRRP it not A or B because that is HSRP so you are left with C and D. As you need the router to take over you need the prepemt option. you know the group is 5 so my Answer would be D

a piece of advice for anyone wanting to take the test, answers here are at least 95% correct, maybe something might be mistaken here or there or depends on what Cisco wants as the answer or whatever they mean by the question sometimes they are tricky or oblivious (read CAREFULLY SPECIALLY) for the questions that are not quick multiple choice and there’s configs in the picture. one letter keyword or apostrophe changes the whole thing, if you are unsure just research yourself, example WLAN in SD FABRIC should be outside, it’s documented on cisco’s website so I chose my own answer on this one, the rest is based on answers on this site….

Passed my exam, every question in this page is correct! Thank you!

Passed today with 97x score
The Dump is valid ! Hurry UP guys, Come on !!!

An engineer is configuring GigabitEthernet1/0/0 for VRRP. When the router has the highest priority in group 5, it must assume the master role.
Which command set should the engineer add to the configuration to accomplish this task? interface GigabitEthernet1/0/0 description To IDF A 38-70-774-10 ip address 172.16.13.2 255.255.255.0

A. standby 5 ip 172.16.13.254 standby 5 priority 100 standby 5 track 1 decrement 10
B. standby 5 ip 172.16.13.254 standby 5 priority 100 standby 5 preempt
C. vrrp 5 ip 172.16.13.254 vrrp 5 priority 100
D. vrrp 5 ip 172.16.13.254 255.255.255.0 vrrp 5 track 1 decrement 10 vrrp 5 preempt

Passed with 95x score 2 or 3 news question

@Anonymous,

Congratulation..

I have to pass this exam, as soon as possible..

May I ask you to share a valid dump for this exam on
alkapexport@gmail.com

Many Thanks for your help

@Anonymous
Congratulation..

I have to pass this exam, as soon as possible..

May I ask you to share a valid dump for this exam on
ahmedsheiabni55@gmail.com

Many Thanks for your help

pass today 9xx, premium is still valid
just 3-4 new question

guys, can any one confirm to me, how many questions to study base in the premium plan?

@Hi Digitaltut Do not understand why you are persistent on asking for the same answer to the same question. Network engineers do research, they find solutions to problems unforeseen. Here you have the problem and 4 possible solutions and the internet to help you find the answer. If you cannot take the first step on your own, why are you in the field. One wrong question on the exam is not a bad thing. I answer questions wrong purposely but although 90% looks good, the test is design to be difficult.

Another word to the wise. DO NOT PASS YOUR EXAM IN UNDER AN 90 MINUTES. You have 2 hours slow and read the question. Finishing the test in under an hour makes it obvious that you had help. A CCIE will take more than without using any help. Be smart, the only way a good things stays available is if you are smart in nurturing it.

Personally I find it disrespectful for anyone to advertise their dumps on another website. If someone is sharing their dump on this forum 10/10 it is not valid.

Passed today 965/1000 watch out for revise questions and answers.

@Waw can you give an example of a revised question?

SELLAM ALIKUM

Alhamdullah i passed yesterday the exam , i got all question from digitaltut,
only one question i could not recognize, i recommend all to count on this page

Totally agree with Anonymous. If you dont́ know the answer to obvious questions, you are def not ready for this exam.

Has anyone done the online option of taking the exam at home? How was the experience?
Did you run into issues?

Due to COVID, not a lot of date/time options at the Test-Center.