Share your ENCOR Experience

I just passed the exam. I subscribed to this site premium membership only last night to practice but there no time because i had already booked for the exam this morning.
I only practiced the composite quiz twice which i failled.
I entered the exam very anxious and panicking but i was able to pass with 889 points.
I strongly believe the exam will easy for anyone who studied and understood the materials provided on this site.
Good luck!!!

Could somebody share the latest dump with me ?
damned_street@hotmail.com

Is there material for ENSLD?

@Anonymous
Can you share a link at cisco.com, where it about 50% off now? Can’t find it…

Passed today using dumps from here. Not all questions are posted in premium but are enough to pass. Good luck

Can anyone say about -50% off for CCNP exam for now? Where is a exact link about this at cisco.com portal? Thanks.

@Me
what are the new squestions et how much it ?

Just passed the 350-401 exam few hours ago at home, score 9XX/1000!!

I got 105 questions in total, and came across 8-10 new questions. DigitalTuT is the best so please practice all the quizzes.

When you get to check out and pay for the exam apply the following code CLGlobal21 and the 50% will come off the amount.

below is a video link regarding this

https://www.youtube.com/watch?v=6MqNMFVLj1M

https://learningnetwork.cisco.com/s/cisco-certifications-and-training-offers

@ Fidonet please find above the link to the discount.

@Pam McDonald you are not welcome here get out!!!!

Ok, guys, respect for the info!

Which statement about agent-based versus agentless configuration management tools is true?
A. Agentless tools require no messaging systems between master and slaves.
B. Agentless tools use proxy nodes to interface with slave nodes.
C. Agent-based tools do not require a high-level language interpreter such as Python or Ruby on slave nodes.
D. Agent-based tools do not require installation of additional software packages on the slave nodes.

A or C

Which two pieces of information are necessary to compute SNR? (Choose two)
A. EIRP
B. noise floor
C. antenna gain
D. RSSI
E. transmit power

BD or BE ?

Refer to the exhibit. An engineer is using XML in an application to send information to a RESTCONF-enabled device. After sending the request, the engineer gets this response message and a HTTP response code of 400. What do these responses tell the engineer?

A. POST was used instead of PUT to update
B. The Accept header sent was application/xml
C. The Content-Type header sent was application/xml.
D. JSON body was used

B or C or D ?

Answer B

Which action is the vSmart controller responsible for in an SD-WAN deployment?
A. onboard vEdge nodes into the SD-WAN fabric
B. gather telemetry data from vEdge routers
C. distribute security information for tunnel establishment between vEdge routers
D. manage, maintain, and gather configuration and status for nodes within the SD-WAN fabric

A or C ?

Which access controls list allows only TCP traffic with a destination port range of 22-443, excluding port 80?
A. Deny tcp any any eq 80 Permit tcp any any gt 21 lt 444
B. Permit tcp any any neq 80
C. Permit tcp any any range 22 443 Deny tcp any any eq 80
D. Deny tcp any any neq 80 Permit tcp any any range 22 443

Which action resolves the EtherChannel issue between SW2 and SW3?
A. Configure switchport nonegotiate on SW3
B. Configure channel-group 1 mode desirable on both interfaces
C. Configure switchport mode trunk on SW2
D. Configure channel-group 1 mode active on both interfaces

B or D

What is a characteristic of MACsec?
A. 802.1AE is built between the host and switch using the MKA protocol using keys generated via the Diffie-Hellman algorithm(anonymous encryption mode)
B. 802.1AE provides encryption and authentication services
C. 802.1AE is built between the host and switch using the MKA protocol, which negotiates encryption keys based on themaster session key from a successful 802.1X session
D. 802.1AE is negotiated using Cisco AnyConnect NAM and the SAP protocol

Bor C

Which statement about agent-based versus agentless configuration management tools is true?
A. Agentless tools require no messaging systems between master and slaves.
B. Agentless tools use proxy nodes to interface with slave nodes.
C. Agent-based tools do not require a high-level language interpreter such as Python or Ruby on slave nodes.
D. Agent-based tools do not require installation of additional software packages on the slave nodes.

A or C

TaqwaMarch 8th, 2021
Which two pieces of information are necessary to compute SNR? (Choose two)
A. EIRP
B. noise floor
C. antenna gain
D. RSSI
E. transmit power

BD or BE ?

TaqwaMarch 8th, 2021
Refer to the exhibit. An engineer is using XML in an application to send information to a RESTCONF-enabled device. After sending the request, the engineer gets this response message and a HTTP response code of 400. What do these responses tell the engineer?

A. POST was used instead of PUT to update
B. The Accept header sent was application/xml
C. The Contentc-Type header sent was application/xml.
D. JSON body was used

B or C or D ?

certc0llect forum has not been working for two months.
Whether the forum address has changed ?
Maybe people migrated to another forum ?

yeah ; they alwaus try to attack him ; and now they succed

who is attacking this forum ?

Passed the exam with 9xx marks. Thanks to Digitaltut premium..!

There were around 5 new questions. Otherwise all other questions are from here.

1. There was a antenna radiation pattern
– I have selected dipole

2. There was a python code to calculate the time and ask to pick the out put.
– I have selected which had Linux/epoch in the answer (don’t know whether it is correct)

3. There was a Jason script and we have to pass the output of the script to python to print the simple UTC time. Sample python lines were given as choices
– I have selected the answer with [xxx][0][‘simpletime’] – (don’t know whether it is correct)

As others mentioned, these two questions were there for me as well

A company has an existing Cisco 5520 HA cluster using SSO. An engineer deploys a new single Cisco Catalyst 9800 WLC to test WLC to test new features. The enginner succesfully configures
a mobility tunnel between te 5520 cluster and 9800 WLC. Clients connected to the corporate WLAN roam seamlessly beetween access points on the 5520 and 9800 WLC. After a failure on the
primary 5520 WLC, all WLAN servicess remain functional, however clients cannot roam between the 5520 and 9800 controllers without droppping their connection.
which feature must be configured to remedy the issue ?
A – mobility MAC on the 5520 cluster
B – mobility MAC on the 9800 WLC >>>
C – new mobility on the 5520 cluster
D – new mobility on the 9800 WLC

What is provided by the Stealtwatch component of the Cisco Cyber Threat Defense solution?
A – real-time threat management to stop DDos attacks to the core and access networks
B – real-time awareness of users devices and traffic on the network >>>>
C – malware control
D – dynamic threat control for web traffic

Good Luck..!

2. There was a python code to calculate the time and ask to pick the out put.
– I have selected which had Linux/epoch in the answer (don’t know whether it is correct)

3. There was a Jason script and we have to pass the output of the script to python to print the simple UTC time. Sample python lines were given as choices
– I have selected the answer with [xxx][0][‘simpletime’] – (don’t know whether it is correct)

As others mentioned, these two questions were there for me as well

A company has an existing Cisco 5520 HA cluster using SSO. An engineer deploys a new single Cisco Catalyst 9800 WLC to test WLC to test new features. The enginner succesfully configures
a mobility tunnel between te 5520 cluster and 9800 WLC. Clients connected to the corporate WLAN roam seamlessly beetween access points on the 5520 and 9800 WLC. After a failure on the
primary 5520 WLC, all WLAN servicess remain functional, however clients cannot roam between the 5520 and 9800 controllers without droppping their connection.
which feature must be configured to remedy the issue ?
A – mobility MAC on the 5520 cluster
B – mobility MAC on the 9800 WLC >>>
C – new mobility on the 5520 cluster
D – new mobility on the 9800 WLC

What is provided by the Stealtwatch component of the Cisco Cyber Threat Defense solution?
A – real-time threat management to stop DDos attacks to the core and access networks
B – real-time awareness of users devices and traffic on the network >>>>
C – malware control
D – dynamic threat control for web traffic

Good Luck..!

Ensld material?

Hi, I passed few days ago with 9XX score. Got few new questions given here in comments and everything rest from dump. But remember that you need to understand each of these questions – because answers are different on exam, and read exactly what they are asking about (sometime it’s the same question but asking not for gi0/0 but gi0/1 – dont miss that).

Hi Friends,

Could you please share the latest question rameshbabu dot cmc at gmail dot com

@Digitaltut.Thanks you very much i valid with 93x score.just 3 new questions .but take and read these questions.

Thanks go to enarsi.

Dears,
i’d like to ask what is the excepted time to get the scoring report on mail it must be on the same day or it can sent on the next day

Good morning everyone,

I passed today with 9xx, there were only 3 questions that were not covered here but weren’t to difficult to answer. One was about SD wan, the other 2 were wireless with one of them being a different image the question we have on here were the answer is “Patch”. Other than that the I probably answered 10 questions from Part 4-5 questions and rest were from 1-3.

Also, I’d like to mention that I’m a test taker in the USA and I did not study the Composite 100q quiz. I literally just studied each topic provided in the main Premium because I didn’t want to forget a question by taking the 100q quiz only.

thanks and goodluck everyone.

DIGITALTUT thank you!!! see you again in 3 years, next is ENARSI 300-410…

@Van congratulations mate! Will sit for the exam tomorrow also. Wish me luck!

@Alex is the exam questions here are still Valid? thank you.

@Anonymous, all the questions are still valid, you are probably going to get 5-6 new questions but Digitaltut 5 sections are enough to pass the exam. GOOD LUCK

For w.e reason they didn’t post my comment but I wanted to tell everyone that this exam is still valid. I passed with a 9xx and only saw 3 new questions that weren’t covered and it was one on SD-WAN and there two on Wireless. Other than that everything I studied was from this site and I took the test in the USA/

@Alex thank you for the feedback and Congrats :)

@LTZY
Good luck to you.

Passed with 9** got 8 new questions but most are from here and they twist them a bit. All the best..

passed today dont forget ro read the questions

guys passed encor today using howmer dump is valid.

contact his team on ckckikehomekrk @ gmail (remover all k) they make sale of only valid dump. good service at low cost

Hello all! Passed today with 935 remarks! Around 3-5 new questions. Just study and understand the questions well in this site and you will be good. Thanks @digitaltut and everyone!

I passed yesterday with 90x, 105 questions. Done at home on Brazil. Few new questions, 2 or 3, few questions with different answer options and I thought curious, drag’n drops were the same but almost then with only 3 option/boxes, not the big drag’n drop like dumps. 90% is the same. There were most recent questions on March pdf dump.

Passed today, thank´s digitaltut.
Only 5-6 new Questions.

Hello Guys, does the simulations are part of encor exam..?

Is there any one had the exam today ? is it still valid

Where is the questions part 1 -3 ? it just disappear. @digitaltut can you fix the issue. Or did i miss something

Note: The New ENCOR Questions Part 1 to Part 3 have been classified into specific topics so we removed them.

Hi, I passed the exam with 89x two days ago.
Thank´s, digitaltut is valid.
About 5 new questions.