Share your ENCOR Experience

Passed today with 9xx, 40% of the questions from New Encor Part 3.

Congratulations Echnaton, thanks for sharing info with us.
Did you see any new questions?

@enchnaton,

what about the other 60% questions? did you get it from the remaining questions provided by digital tut premium questions?

Hi guys,

Can anyone help about these 2 new questions?
I’m going to take exam next week so all opinions and new questions are precious ;)
Thank you.

Refer to the exhibit. An engineer is designing a guest portal on Cisco ISE using the default configuration.
During the testing phase, the engineer receives a warning when displaying the guest portal.(YOUR CONNECTION IS NOT PRIVATE WARNING ) Which issue is
occurring?

A. The server that is providing the portal has an expired certificate
B. The server that is providing the portal has a self-signed certificate
C. The connection is using an unsupported protocol
D. The connection is using an unsupported browser
Answer B ?

Refer to the exhibit. Which level message does the WLC send to the syslog server?

A. syslog level errors and less severity messages
B. syslog level errors messages
C. all syslog levels messages
D. syslog level errors and greater severity messages

SYSLOG LEVEL : ERRORS

Answer A ?

@McRae

Refer to the exhibit. An engineer is designing a guest portal on Cisco ISE using the default configuration.
During the testing phase, the engineer receives a warning when displaying the guest portal.(YOUR CONNECTION IS NOT PRIVATE WARNING ) Which issue is
occurring?

A. The server that is providing the portal has an expired certificate
B. The server that is providing the portal has a self-signed certificate
C. The connection is using an unsupported protocol
D. The connection is using an unsupported browser
Answer: B

Refer to the exhibit. Which level message does the WLC send to the syslog server?

A. syslog level errors and less severity messages
B. syslog level errors messages
C. all syslog levels messages
D. syslog level errors and greater severity messages

SYSLOG LEVEL : ERRORS

Answer: D

Pass today, only 2 question not in this dump. Thank you digitaltut

Very new to this page, can someone please post or send the latest dumps?
Networksampath at gmail

Hello,

can someone clarify is ENCORE equivalent of CCIE written ? of the old program .

TIA

does any one could help me where can I found for free the Encor BOOK

@Anonymous that’s a tricky question because the number associated is lower as severity level is greater , I think this is the confusion here!!
In my point of view the correct is D.

If anyone disagree please let me know to clarify this question, Thanks ;)

Refer to the exhibit. Which level message does the WLC send to the syslog server?

A. syslog level errors and less severity messages
B. syslog level errors messages
C. all syslog levels messages
D. syslog level errors and greater severity messages

SYSLOG LEVEL : ERRORS

Answer: D

Yes, all from the remaining questions of the premium, i think just one new question.

hello 9tut,please do you have any dumps for the security concentration exams.

Passed today, all questions from 9tut except two new questions. Two new questions was about YANG and NETCONF.

Passed today with 923. Thanks to Digitaltut Premium Membership. Mostly questions came from part3 question set.

I encountered 1 new question;

Which one is shared in VM environment?
a) Application
b) Operating System
c) VM config file
d) Disc

I choosed Disc

Hi guys,

@Ery thank you for sharing ;)

I think it’s D .

If anyone has taken exam recently, please share !

Thank you !

just passed. this is a great study site and all you need, as long as you know all these questions and UNDERSTAND why the answer is what it is.

For those using training materials along with this site… Which video series did you find good for ENCOR?
* Kevin Wallace
* Cbt Nuggets
* INE
Anything else?

@Anonymous

ITPROTV is a fine video course ;)

Hello, Need your help on this.

Which requirement for an Ansible­-managed node is true?

a. It must have an SSH server running.
b . It must be a Linux server or a Cisco device.
c. It must support ad hoc commands.
d. It must have an Ansible Tower installed.

I have passed today with 930. first thanks from 9tut ! I have membership in premium. all the question is valid. and I have face with new question almost 4 question. I am explain in my own word.

1. what chractrastic new firewall generation has.
a.layer 3 and layer 4 must protect
b each layer should have firewall.
xxxx.
xxxx.

2. as engineer you must allow ssh with 100k
xxxxx.
xxxxx.
xxxxx.
xxxxx.

I just remember the question like that , if you have question please let me know

What is the purpose of an RP in PIM?

A. send join messages toward a multicast source SPT
B. secure the communication channel between the multicast sender and receiver.
C. receive IGMP joins from multicast receivers.
D. ensure the shortest path from the multicast source to the receiver

I think A is correct and not C, because IGMP joins are received by LastHopRouters and not by RP.

Nick, I think A. is correct. If an RP is present, we are in sparse mode. In sparse mode, a router thinks that others don’t want to fwd multicast pkts for a group, unless there’s explicit request for the traffic. If hosts join a multicast group, their directly connected routers send PIM Join msgs toward the RP. The RP tracks multicast groups. Hosts that send multicast pkts get registered with RP by the first hop router for that host. The RP then sends Join messages toward the multicast source. At this point, pkts are fwd on a shared distribution tree.

Hello, is there anyone who passed the encor and studying new CCIE lab exam? What is the strategy you follow?

Need your help on this q

When a wired client connects to an edge switch in an SDA fabric, which component decides whether the client has access to the network?
A. control-plane node
B. Identity Service Engine
C. RADIUS server
D. edge node

Which requirement for an Ansible­-managed node is true?

a. It must have an SSH server running.
b . It must be a Linux server or a Cisco device.
c. It must support ad hoc commands.
d. It must have an Ansible Tower installed.

@Yow

Buddy its B for the first one

and C for the second one

@ Yow

sorry B for the second one as well

According to these articles, I would say the best answer is A (SSH server running on managed node) for the second question.
https://docs.ansible.com/ansible/latest/installation_guide/intro_installation.html#managed-node-requirements

and here you can read about Windows as a managed node (second paragraph) https://www.thegeeksearch.com/how-to-to-install-ansible-on-a-control-node/

or here https://docs.ansible.com/ansible/latest/user_guide/windows_usage.html

so it not a must for managed node to be a Linux server or a Cisco device.

Thanks rtfm & nick for your input.

I have another q here

What does the LAP send when multiple WLCs respond to the CISCO_CAPWAP-CONTROLLER.localdomain
hostname during the CAPWAP discovery and join process?
A. broadcast discover request
B. join request to all the WLCs
C. unicast discovery request to each WLC
D. Unicast discovery request to the first WLS that resolves the domain name

Hello, Can anyone help me on this question. Thanks

In an SD-Access solution what is the role of a fabric edge node?
A. to connect the fusion router to the SD-Access fabric
B. to connect external Layer 3- network to the SD-Access fabric
C. to advertise fabric IP address space to external network
D. to connect wired endpoint to the SD-Access fabric

@Yow > C

Jim > D

Passed today with over 9xx. There were at least 5 new questions, but weren’t very hard. More like CCNA level.

I passed the exam last night with 93x!, All the Q&A came from this site, only 2 new questions. Thanks digitaltut for keep updated the Q&A.
Regards!.

Hi @AngelSB,

Could you please share the dump with me? Or at least if you can guide me the study material will be a great help.

Thanks

Is it enough to pass the exam if I prepare only New ENCOR part 1,2,3 questions? Or do I need to also prepare all the Q&A listed under multiple sections (EIGRP & OSPF Questions 2 , Multicast, NTP questions etc.,) in ENCOR 350-401 exam?

i have exam today after 2 hours ! is dump still valid ?

any one have the last dump plz

@ AngelSB, you got the questions only from New ENCOR part 1,2,3 questions?

Anyone who took it recently can confirm if the questions were only from New ENCOR part 1,2,3 questions ?

@Anonymous

how was your exam?

Thanks @digitaltut…

I passed today with a score over 9xx. All the questions from premium zone and there are 2 to 4 new questions easy to manage that I don’t memorize. But if you understand the explanations from here you should be able to get them easily.

YES @ Juju all the questions are from Premium zone except 2 or 3 new ones. But if you understand the explanations of the concept here, you should be able to answer them easily.

Great reference here.
I passed today with more than 9xx. Go premium!!!
Thanks so much

Congratulations @ Kimelem, and thank you for the confirmation!!

wrote the Test Today, get only 7xx Points.
Only 50% where from digitaltut. Hope you will add some new questions. There where a lot Questions to Syslog an print.
D&D same as from here but questions i think 60-70 new one.

I recently got premium membership but not understanding from where should i start.? :(. Either only from Premium section Encore-1-2-3 questions or Questions which are present topic wise under 350-401 those as well ?

Sorry @phill but you read from premium questions?

Sorry @Phil. What are the study materials you’ve used to prepare for the ENCOR exam? aside from the premium QAs.

@Llal what did you mean? I have a premium membership and learn all New Questions to 100%.
Also learned all D&D. whatever maybe i had no luck but there where easy 60+ new question´s that i didn´t read before.

@Phil sorry to hear that man…
We need more feedback from everyone in the community thought