Share your ENCOR Experience

It`s all validated. Use premium and get your exam

Where is that premium ?

What are two reasons why broadcast radiation is caused in the virtual machine environment? (Choose two)
A. vSwitch must interrupt the server CPU to process the broadcast packet
B. The Layer 2 domain can be large in virtual machine environments
C. Virtual machines communicate primarily through broadcast mode
D. Communication between vSwitch and network switch is broadcast based
E. Communication between vSwitch and network switch is multicast based

who know this question answer ? Please share as body

I think John failed because he never updated us :(

Thank you @digitaltut. This is awesome ! Guys passed the exam with a good score , premium dumps are really valid , little bit difficult/ Different questions from the Automation(Json) and VRRP , but do the Composite Quizzes (large ) at least 10 times , read the explanations carefully you can easily pass the exam. Cheers !!!

@Vxlan were most of the questions from the premium sections below? or were there a lot of questions from the regular sections as well?

New ENCOR Questions
New ENCOR Questions- Part 2
New ENCOR Questions- Part 3

@Harry P0tter , if you do Composite Quizzes (large) like 8-10 times , you can cover 95% but the best thing is you do every single thing at least 2 times then follow the Composite Quizzes until you have enough confidence . most of the new questions are coming from the Automation section.

There’s a new question, same topology as in question 55 from **New ENCOR Questions- Part 2**

Question:
What two configuration should be executed to achieve packet coming from PC1 connected to ALSW1 to pass through lower numbered port between DSW1 and DSW2.

When root port is selected on DSW1, lower numbered port is blocked, but we want lower numbered port to be in forwarding.

Two options i remember, (which I marked)
1. ON DSW1 (config-ter)#interface teng1/0 (entering lower numbered-interface view)
2. On DSW1 (interface-gig1/1)#spanning-tree port-priority 0 (higher priority is chosen, default is 128)

I got 100% in Infrastructure, so this Answer is correct (at least the idea).

Thank you!!

@Vxlan how can I find Compozite please share link pls ?

https: // www. mediafire. com/file /bw7b3pilcg700r0 /ENCOR_Dec_2020.pdf

Tunnel-Private-Group-Id(81): 15 Tunnel-Medium-Type(65): IEEE-802(6) Tunnel-Type(64): VLAN(13)

Which three behaviors will the client experience? (Choose three)

A. While the AP is in standalone mode, the client will be placed in VLAN 15.
B. While the AP is in standalone mode, the client will be placed in VLAN 10.
C. When the AP transitions to connected mode, the client will be de-authenticated.
D. While the AP is in standalone mode, the client will be placed in VLAN 13.
E. When the AP is in connected mode, the client will be placed in VLAN 13.
F. When the AP transitions to connected mode, the client will remain associated.
G. When the AP is in connected mode, the client will be placed in VLAN 15.
H. When the AP is in connected mode, the client will be placed in VLAN 10.

who remember this question ? thnx @GOD

@Anonymous, stop confusing people. the pemium dump from digitaltut is the only one valid.

He is doing the same things in all other sites like 9tut, …..

@Digitaltut, can you stop this S P A M M E R ?

I have all latest and valid Cisco CCNA exam questions email is alisroman 161 {@} g mail . com

Which two statements about VRF-lite are true? (Choose two)
A. It can increase the packet switching rate
B. It supports most routing protocols, including EIGRP, ISIS, and OSPF
C. It supports MPLS-VRF label exchange and labeled packets
D. It should be used when a customer‘s router is connected to an ISP over OSPF
E. It can support multiple customers on a single switch

WHO KNOW THIS QUE

Passed the exam with 96X score, premium dump is 100% valid.

Thanks to Digitaltut !!!

congratulations Yanior.Thank you for informing us.
I will take the exam in the coming days. Do you have any advice for me about the exam?

@scorpion,
If you are Premium Member, use the Composite Quizzes 102 Questions as much as you can. Goode luck.

@ergenekon
VRF without MPLS/BGP= VRF Lite
VRF Lite can be configured with static route, eigrp, IS-IS,ospf
VRFs create many routing tables for multiples customers

Just passed with a score of 944, only saw 3 new questions, but they were easy if you just read the questions, you can figure out which one doesn’t make sense of the answers … regardless of the new questions.. practice the composite a few times and you’ll be good to go…

Might take exam next week … any new material?

anbody can explain to me what is the diffrence between premium membership and te question which published with this site
i used only publc question which published at 9tut and it worked for me great with CCNA question , i pased with 94*

Great site tut in the best! With my school that preapred cisco exams and other, a few questions is a fake response…. thank you so much tut for yours great work with a correct response and a good explaination.

who take a exam on january and are there any new question ? Pleasde share us bro

@B3hrad
Premium has more questions

who know this question?
Which access controls list allows only TCP traffic with a destination port range of 22-443, excluding port 80?
A. Deny tcp any any eq 80
Permit tcp any any gt 21 lt 444
B. Permit tcp any any neq 80
C. Permit tcp any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any neq 80
Permit tcp any any range 22 443

Hi, i attempted to get my exam yesterday but the proctor didnt joined during check-in time, i got freaked out and rescheduled 2 mins before my exam time starts, should i wait for the proctor or do like i did?

Can anyone please confirm how many total questions in the dumps? and also if there is any lab involved?

Thanks

hi, what are the new questions???

Passed the exam today,
Just 4-5 new questions.

Passed the exam today, i had like 3 new Questions. one wir URI, and one with Drag and Drop. Is there any page with dumps for ENWLSI please?

Passed today. Scored 9xx.

Dumps still valid. Only about 3-4 new questions.

New questions were about HSRP and NTP logging.

Thank you all for your contribution.

someone gave the test at home? is there a previous interview? Could you give me more details please, I’m thinking of giving it next week. Thank you

@GO-ENCORE
I took my exam at home few days ago. No interview, no talking, juste passing my exam.

did u have to install anything ? was it Pearson vue?

what it like?

who pass the exam on january ?

@Yanior do you recommend taking the exam at home? did not present any problem? Did you pass the exam? I have some fear because I am Latino, I can read English but not speak. Could you give me more details or someone answer my question?

@GO-ENCORE you wont need to speak but maybe write it if needed, i took it from home and everything was allright

Just passed today, 95X.
Premium dumps are valid, 2-3 similar but different questions and 2-3 new questions.
Home exam was fine, spoke a bit of English with the moderator at the beginning as he asked me to turn my camera and show him the room.

@DD , How many Q&A in premium dump?

@GO-ENCORE
I highly recommend taking the exam from Home, Do you not need to speak. In case of any issues, the Protector will chat with you.

I recommend to have a reliable internet connection, because if the exam is interrupted, the Protector may have to call you by phone for investigation.

Drag and drop the LIPS components on the left to the correct description on the right. (3 options)

MAP SERVER: network infrastructure component that learn of EID-prefix mapping
EID:IP /IPV6 of and endpointin LISP site
ETR: de-encapsule LISP packets coming from outside of the LISP site

@Maria thx for your reply, anyone know january questions please share on comment. I have been checked every days on site comments,

:)))))))))

Thank you Digitaltut. I passed my my exam today 96xx.All are Valid questions .

Thanks for the info @YANIOR @Darxz

I take the exam very soon. do i have time to go over material or just focus on composite quiz?

@ETR Congrats for passing!

What about new questions and some new contents?

Thank you.

Hi everyone,

Could someone please help on this question?

Which access controls list allows only TCP traffic with a destination port range of 22-443, excluding port 80?

A. Deny tcp any any eq 80
Permit tcp any any gt 21 lt 444

B. Permit tcp any any range 22 443
Deny tcp any any eq 80

C. Permit tcp any any neq 80

D. Deny tcp any any neq 80
Permit tcp any any range 22 443

It’s confusing, the correct answer seems to be A but it is not possible to implement !!!

Thanks ;)

Passed the exam today. 9xx.
Premium is still valid. Good to y’all.