Share your ENCOR Experience

I see that there are deliberate mistakes on some of the questions. On ACLs, VRRP and some other questions. Is Cisco expecting test takers to choose the best answer available? Don’t they want to correct them? Are these mistakes really designed to test the intelligence?

Question H
Commands to configure ip address under an interface assigned to a VRF (choose two)

interface FastEthernet 1/0
ip vrf forwarding Red
no ip address

Answers
– (config-if)#ip address 192.168.1.1 255.255.255.0

– (config-vrf)#address-family ipv6

@digitalut : can you update your question bank please? My premium membership is expiring soon and I plan writing the exam next week !!!

Hi Sourabh.

Please update about your exam experience.

@Sourabh let us know your experience..

Guys”

Update from Exam. By the Grace of Allah, I have cleared my cisco Encor exam .

The questions which are Digital TUT are all valid.

The Ten questions shared in the comments are also valid and appeared in my exam.

There were one or two questions which were new but they were very easy if you understand the concept.

1. please read how to access VTY lines via SSH and block unsecure access and read the function of Exec-time command applied to VTY. I do not exactly remember the question at yhis time but if you have the concept of mentioned it will be easy to solve.

2. there was one question about HSRP , The status of standby router is unknown and the main reason is the mismatch of Key string used for encryption.

Read the syntax of JSON code very clearly.

Quiuck Update on Exam.

1. The Question on website are Valid.
2. The Questions shared in the comments are also authentic.
3. Read how to apply SSH protocol to VTY lines with exec-timeout command.
4. Read Authentication for HSRP
5. Read track functionality with VRRP.

I hope this will be enough to clear exam.

Sorry to all the guy’s but I lost my exam. I was not feeling well at that time.
There is no plan for me to retake the exam.
I will contribute over here & will support all of you.
Kindly don’t hesitate to ask me question.

Hello, can you update your question base? what happens is that my exam is on December 15, 2020

@AKI can you share approximately your score?

@Darxz 9XX

@AKI – 2. The Questions shared in the comments are also authentic – were you referring to Grogu’s comments?

@AKI can you share more about the new questions? Are they the same as @Grogu mentioned or there are more?

Thanks in advance!

Is it worth it to be a premium member even without the new questions?

hi guys
Did my test today and passed with 9xx Points
the questions in digitaltut are 100% valid + these 10 questions. i had about 3 of the new questions.
So if you study all the questions in premium and do the composite quizzes you are fine!
last year with networktut this year with digitaltut
best 20$ for learning for an 400$ exam.

just buy premium guys and do the test, you will be fine

Peace

@ Tester Grogu’s questions are valid and there were two new questions which I mentioned in the comment earlier.

Hi All,
Can anyone here share the 10-new questions plsss… i’ll be taking next week hopefully.
Thank you.

@NewYork Thanks for your update, I have schedule exam on coming Sunday, I appreciate if you guys will keep updating, I will share my exam experiences on Sunday.

@MyKl GOOD LUCK, I WAIT FOR YOUR COMMENT

Sorry for the late post but I was trying to post here but the site was not responding.
I have not attended the exam due to health issue.
Sorry but right now I have no plans to retake the exam.
I will contribute over here & will help you guys.

@MyKl do you know until which date gives option to take the exam on this year?

Hello everybody
Soon I will present to the exam any advice to pass?

regards

@AKI
For Question H, why ipv6 and not ipv4?

Thanks to Allah I pass my exam today, @digitaltut updated new QA today so I no need to explain anything here.

I heard that it is hard to pass the exam by simply memorizing the answers. You need to understand the concept of each question, the how’s and why’s of the answer. Don’t take the test if you aren’t ready.

Hi Guys, I passed my exam earlier today and I’ll like to inform you all that some (about 4) of the newly added questions came up in the exam so pls make sure you go thru all of the questions. Best of luck :)

hi i check my cert track and my cert are not updating. i already pass the encor to renew my old ccnp. just wondering why? it didnt update the cert expiration. anyone??

Thanks digitaltut! Premium tests are valid!

new question – about golden image in DNA Center.

I have noticed that there is a new section (Questions #3), should we consider that Questions #1 + #2 + #3 and the topic questions are enough for passing the exam?

Hi guys, I did my test Friday and passed with 9xx points. The questions in digitaltut are 100% valid and the questions of Part 3. I had about 4 of the new questions.

Thank you to digitaltut

@tom701 any questions you remember that wasn’t in digitaltu’s questions?

thanks

@all; thanks for sharing information here, we like to hear when you pass the exam and this is what makes this website a great resource.

@kainpp, it takes 10 business days for the certifications to get updated and show up

Passed today! Got around 6 of the new questions and there’s 1 more question not in here: What is the function of a WLC when it is in a Master controller mode?
Thank you digitaltut and all the guys around here. You are all amazing! All glory to God in the highest! God bless you all in Jesus name!

May I know how u guys get the dump from here, for non premium members? Appreciate the help

Also passed the exam these days! Thanks @digitaltut and all you guys who shared the exams experience, without you the passing would be very very hard! Thanks one more time!
I have noticed just one new question which is not listed in none of the sections of this site. It was something related to “integration API” like: Where it is located or something like that and the answers were like:
a) Northbound
b) Southbound
c) Westbound
Something like that, I don’t remember exactly.
Good luck to all of you!

P.S. Stop asking for free dumps, the premium is just 19$…These guys deserve it!

Please can someone share with me the last dump 350-401?

email: mostafa.mohamed090908@gmail.com

@CCNP

This page is quite a bit older, but seems to match the question.

Q. When should I use the master controller mode on a WLC?
A. When there is a master controller enabled, all newly added access points with no primary, secondary, or tertiary controllers assigned associate with the master controller on the same subnet. This allows the operator to verify the access point configuration and assign primary, secondary, and tertiary controllers to the access point using the All APs > Details page.

The master controller is normally used only when adding new access points to the Cisco Wireless LAN solution. When no more access points are being added to the network, Cisco WLAN solution recommends that you disable the master controller.

https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/69561-wlc-faq.html

I will be testing today and will update you all.

@Edu, there were no new question but some from Part 3.

Hello all,

Just passed with a 9xx. All questions are on here as a premium member except the below.

1 new trunking question. Shows a diagram of 2 switches that are both currently set to switchport mode dynamic auto and you have to add a command to set up the trunk.

Answer: switchport mode dynamic desirable

2 new JSON questions. It is similar to Q9 (this one was on there too but the answers are not the same) but both new questions were more complex. Mainly just need to understand how the syntax is and you are good to go.

Q9
https://www.digitaltut.com/automation-questions-2

1 new OSPF/EIGRP comparison question (check two)

Answers
OSPF only supports equal-cost load balancing
Cant remember the other :(

Just some extra advice Q56 has 2 answers with the router-id command so make sure you are checking IP addresses.

Q56
https://www.digitaltut.com/new-encor-questions

This question is on the exam too.

VRRP question regarding commands to configure it

vrrp 5 1.1.1.1
vrrp 5 track 1 decrement 10

vrrp 5 1.1.1.1
vrrp priority XXX

Standby commands
Standby commands

In this exam is there some kind of laboratory like in the old exams?

premium members have a private forum?

Hi All,
I passed the exam, score 9xx. The premium account helped along with the questions on the comments. There were about 13 new questions, but still you can pass if you refer to what i mentioned before.
Good luck

thanks digitaltut, just passed the exam, there are 2 new questions:

1. vsmart console connection failed to access, from the browser network debug showing port doesnt match with the one that configured on CLI, question is how to fix this issue ? answer is change the port to match the configured port.
2. show spanning tree int fx/x , there are list of vlans with p2p Edge connection, question is what is the configuration of this port ? answer is spanning-tree portfast trunk

good luck all!

Can you share latest dumps please ?

Just passed with a 9xx. Questions are 100% valid still. There were like 2 or 3 questions that I haven’t seen before. If you know the concepts and all of the questions provided here YOU WILL PASS. See you guys in 2 or 3 years! Good Luck!

Bella,

Please kindly share the dumps with me here
donsam98@gmail.com

Thanks

Anonymous,

Please kindly share the dumps with me here
donsam98@gmail.com

Thanks

Could somebody share the latest dump with me 10 hours later I have exam:)
taylanemrah@hotmail.com