Share your ENCOR Experience

What are two device roles in Cisco SD-Access fabric? (Choose two)
core switch
vBond controller
edge node
access switch
border node

ANSWER: edge node & border node

any news about news dumps?

How often does the premium dumps get updated ?

^^ Edge Node and Border Node.

Everyone Who passed recently, please share the questions that are new for you… thanks

Ready to purchase Premium Membership but need to know if questions are current/up to date.

Yes, uptodate.

Great thank you!

Hello all,

How many questions are to be answered during
the exam?

55 or 60 questions ?

Thanks in advance for the clarification.

102 https://www.digitaltut.com/encor-faqs-tips

Thanks a lot Da!

I passed with 902
All the questions were from the site but some in different versions, be careful and pay attention.

are they just reworded or completely different.

Which method displays text directly into the active console with a synchronous EEM applet policy?

A . event manager applet boom
event syslog pattern ‘UP’
action 1.0 gets ‘logging directly to console’
B . event manager applet boom
event syslog pattern ‘UP’
action 1.0 syslog priority direct msg ‘log directly to console’
C . event manager applet boom
event syslog pattern ‘UP’
action 1.0 puts ‘logging directly to console’
D . event manager applet boom
event syslog pattern ‘UP’
action 1.0 string ‘logging directly to console’

Correct answer is C
is Correct or incorrect ?

@EEM APPLet
C is correct

Hi Guys,

Do you have any updates are exam questions are still same with digitaltut?

Hoping for positive reply.

Hello @digitaltut team,

Do you have any recent updates ?

Thanks in advance for your usual collaboration.

Are there any new questions updated in digitaltut as of today? Please help to confirm. Thanks in advance

they are 103q, I passed today 9xx. all q are updated

@ZOZO

Very similar questions to existing questions but different answers with other parameters, for example there were questions on JSON very similar but with 4 other answers.

this dumps is valid
https://www.mediafire.com/file/z4g0ola5zjbziyd/ENCOR_July_2020.pdf

@encor, congratulations. Did you mean there are new questions updated in digital premium as of today?

is the dumps still valid and enough to pass as we speak?

Hi Guys

I passed today with 900+ the dumps are still valid. Only one new easy question about OSPF and DR/BDR but is a CCNA level question.

Thanks to digitaltut. You are a great study tool

Does anyone have the video course for the CCNP encor exam ?
Could you please share ?

Which access control list allows only TCP traffic with a destination port range of 22-443,
excluding port 80?
A. deny tcp any any eq 80permit tcp any any gt 21 lt 444
B. permit tcp any any range 22 443deny tcp any any eq 80
C. permit tcp any any ne 80
D. deny tcp any any ne 80 permit tcp anyany range 22 443

What is the correct answer?

hello @Anonymous is B, regards

Is there any labs for 350-401 ?

I have just taken the exam 350-401 and passed 🙏 Thanks for all the help here. The dumps are still valid as of today.

Valid dumps, passed with 94x.
Thanks digitaltut.

Which two statements about VRF-lite are true? (Choose two)
A. It can increase the packet switching rate
B. It supports most routing protocols, including EIGRP, ISIS, and OSPF
C. It supports MPLS-VRF label exchange and labeled packets
D. It should be used when a customer‘s router is connected to an ISP over OSPF
E. It can support multiple customers on a single switch

what is the best answer…….. ? BE or DE

Which two statements about VRF-lite are true? (Choose two)
A. It can increase the packet switching rate
B. It supports most routing protocols, including EIGRP, ISIS, and OSPF
C. It supports MPLS-VRF label exchange and labeled packets
D. It should be used when a customer‘s router is connected to an ISP over OSPF
E. It can support multiple customers on a single switch

ANSW : DE

Took the exam recently, passed it.
One new question that is not included here, was about NAT. 2 or 3 questions with a bit different options than here in the dumps. And 2 questions that were mentioned only here in the feedback section, so learn them as well.
When you learn every single question and drag and drop question you will get more than 900 points, more than enough to pass.
Thanks digitaltut!

Which access control list allows only TCP traffic with a destination port range of 22-443,
excluding port 80?
A. deny tcp any any eq 80permit tcp any any gt 21 lt 444
B. permit tcp any any range 22 443deny tcp any any eq 80
C. permit tcp any any ne 80
D. deny tcp any any ne 80 permit tcp anyany range 22 443

Correct answer is A, not B

Hi Guys,

I just passed the exam. Score is 9XX
digitut questions is still valid.

Thank you digitaltut!

Which statement about VRRP is true?
A. It supports load balancing
B. It can be configured with HSRP on a switch or switch stack
C. It supports IPv4 and IPv6
D. It supports encrypted authentication
Answer is D
?
vrrp group authentication md5 key-string [0 | 7] key-string [timeout seconds]
Specifying 7 means the key will be encrypted. The key-string authentication key will automatically be encrypted if the service password-encryption global configuration command is enabled.
anyone can confirm ?
VRRP Limitations
The switch supports either HSRP or VRRP, but not both. The switch cannot join a stack that has both HSRP and VRRP configured.
The VRRP implementation on the switch does not support the MIB specified in RFC 2787.
The VRRP implementation on the switch supports only text -based authentication.
The switch supports VRRP only for IPv4.
what would be the correct answer ?

@Anonymous Ignore such comments it’s from scammers. Can anyone confirm if the ENCOR_July_2020 dump is still valid and updated?

Refer to the exhibit.
An engineer is designing a guest portal on Cisco ISE using the default configuration.
During the testing phase, the engineer receives a warning when displaying the guest portal.(YOUR
CONNECTION
IS NOT PRIVATE WARNING ) Which issue is
occurring?
A. The server that is providing the portal has an expired certificate
B. The server that is providing the portal has a self-signed certificate
C. The connection is using an unsupported protocol
D. The connection is using an unsupported browser

correct answer? if anyone knows

Which access control list allows only TCP traffic with a destination port range of 22-443,
excluding port 80?
A. deny tcp any any eq 80permit tcp any any gt 21 lt 444
B. permit tcp any any range 22 443deny tcp any any eq 80
C. permit tcp any any ne 80
D. deny tcp any any ne 80 permit tcp anyany range 22 443
which is the best answer ?

@nonmae – the best answer is as follows:

B. permit tcp any any range 22 443deny tcp any any eq 80

@Anonymous
I checked answer B by cisco packet tracer.
Data still access server with port 80
I think so B is incorrect

@Noname – A is incorrect as the syntax shows invalid. C is an incomplete statement. Answer D is only correct if the first statement is “Deny tcp any any eq 80″. In fact answer B is only correct if the order of the statement is in reverse order.

R1(config)#ip access-list extended test2
R1(config-ext-nacl)#deny tcp any any eq 80
R1(config-ext-nacl)#permit tcp any any gt 21 lt 444
% Invalid input detected at ‘ ‘ marker

R1(config-ext-nacl)#permit tcp any any lt 444 gt 21
% Invalid input detected at ‘ ‘ marker

R1(config-ext-nacl)#permit tcp any any gt 21
R1(config-ext-nacl)#permit tcp any any lt 444

Exactly!!

well spotted guys, A is conceptually correct but not supported as the arguments are valid but can’t be used together. I hope in the exam this question is correct, if it’s as here I would answer A.

have anybody update encor dump ?

Anyone took the exam (ENCOR 350-401)today? Is digitaltut DUMP still valid?

Assuming that R1 is a CE router, which VRF is assigned to Gi0/0 on R1?
A. default VRF
B. VRF VPN_A
C. VRF VPN_B
D. management VRF

which is the best answer ?
A or B

What is calculated using the numerical values of the transmitter power level, cable loss, and antenna gain ?
A: EIRP
B: dBi
C: RSSI
D: SNR
the answer is A or B ?

Assuming that R1 is a CE router, which VRF is assigned to Gi0/0 on R1?
A. default VRF
B. VRF VPN_A
C. VRF VPN_B
D. management VRF

the answer is A i’m sure 10000%

???