Share your ENCOR Experience

Scam $20 — dont get

Which would be the preferred way of implementing a loop-free switch network where there are 1500 VLANs defined and there is a need to load share the traffic through two major aggregation points based on VLAN identifier?

a. 802.1D
b. 802.1s
c. 802.1W
d. 802.1AE

Hi guys, this is the mail which a receved from Durshanj
———————————————————————–
Hi Brother,

Good day.

I do have the exact questions. Bought it for $100. It comes with PDF + VCE, so you can test yourself with the exam simulation.
Guaranteed pass, and I can share you the latest questions up to your exam date. Apart from that if you have any questions regarding the concepts, protocol and etc, you can contact me anytime and I will guide you.

If you have any doubts on the dumps, you can ask me as well and I can guide you to the correct answers cause I have well studied it.
Willing to share it to you for $20, are you interested ?

Thank you.
———————————————————————-
Durshanj scamDurshanj scamDurshanj scamDurshanj scamDurshanj scamDurshanj scamDurshanj scamDurshanj scam

@ Durshanj,
here is share please not market place
—
Durshanj scam Durshanj scam Durshanj scam

Thanks for clarifying @richmond. I agree with you. Will try to contact Durshanj directly. If you see this comment, please share me Durshanj’s email address. All the best for your Enarsi.

What are two common sources of interference for WI-FI networks? (Choose two)
A. radar
B. LED lights
C. rogue AP
D. conventional oven
E. fire alarm

Answer should be A,D. Can someone confirm? Thanks

I feel the same too. Radar and conventional oven

There are many types of oven guys. Not all causes interference.

Which three NTP operating modes must the trusted-key command be configured on for authentication to operate properly? (Choose three)
A. interface
B. client
C. peer
D. server
E. broadcast
Correct: B,C,E.
Interface is not a NTP operating mode and server mode does not need trusted-key command. It is the client that specifies in the NTP request which key the server should use to authenticate the response.

Question 1

Which OSPF networks types are compatible and allow communication through the two peering devices?
A. broadcast to nonbroadcast
B. point-to-multipoint to nonbroadcast
C. broadcast to point-to-point
D. point-to-multipoint to broadcast

Broadcast
Hello: 10 Wait: 40 Dead: 40

Non-broadcast
Hello: 30 Wait: 120 Dead: 120

Point-to-point
Hello: 10 Wait: 40 Dead: 40

Point-to- multipoint
Hello: 30 Wait: 120 Dead: 120

Two options suit, B, C
If im not correct, please let me know

EIGRP Load Balancing
Every routing protocol supports equal cost path load balancing. In addition, Interior Gateway Routing Protocol (IGRP) and EIGRP also support unequal cost path load balancing. Use the variance n command in order to instruct the router to include routes with a metric of less than n times the minimum metric route for that destination. The variable n can take a value between 1 and 128. The default is 1, which means equal cost load balancing. Traffic is also distributed among the links with unequal costs, proportionately, with respect to the metric.

Is there many IPV6 questions on the exam ? I’m weak on IPV6

Yeah there should be ipv6 questions obviously but don’t worry as it won’t be many ofcourse.

He is creating account and replying to himself to confirm integrity

stop scammer please. We are here for study and for Q&A only from 9tut.. Please don’t reply to this scammer.

Is there any update on the new questions of the ENCOR exam? when should we see them here in digital tut?

VRRP Limitations
The switch supports either HSRP or VRRP, but not both. The switch cannot join a stack that has both HSRP and VRRP configured.
The VRRP implementation on the switch does not support the MIB specified in RFC 2787.
The VRRP implementation on the switch supports only text -based authentication.
The switch supports VRRP only for IPv4.

@ Toshi, I believe the correct answer is A, broadcast to non-broadcast. Look carefully at the question, it asks ‘network types’ are compatible and allow communication through peering. Over a point to point the devices don’t peer and become neighbors so I think that is a bit of a tricky wording. Broadcast to non-broadcast are compatible only if you match the timers which can be manipulated. Check out this post from a cisco forum:

In OSPF the network types have to be compatible. So the network types are grouped as broadcast/Non Broadcast vs other network types. Th network type NBMA shares characterstics such as DR/BDR election, that is the generation of Type 2 LSA with the broadcast type. This is what makes them compatible, and enables them to recurse through the database. Timers is what you need to adjust in order to bring up the adjacency, but only for compatible network types.

This is the compatibility list

Network Types that use Type 2 LSA
Broadcast
Non Broadcast

Network Types that do not use Type 2 LSA
P2P
P2MP
P2MP Non-Broadcast

So you could configure the network type on one side to be broadcast and the other side non broadcast and they can form adjacency as long as the other attributes match. And this is where the timers need to match. If you have broadcast on one side and P2MP on the other side, you can end up in a situation where it looks like the routers form adjacency, but then when they go to do their LSA flooding they can’t solve the SPT and then ultimately can’t route traffic.

Any update @9tut

I pass my ENCOR Exam with 9xx… guys if you need help please let me know heamgu @ gmail dot com

Please ban him he keeps on asking for payment without any proof that he passed.

pls help share dump for me
nampt21 @ gmail . com
Thanks guy

Please ban him he keeps on asking for payment without any proof that he passed.
here is share place not market place

hi @Heamgu
hello can give me the DUMP please
rouam10 @ yahoo dot fr

In which scenario can asymmetric routing occur?

A. active/active firewall setup
B. single path in and out of the network.
C. active/standby firewall setup
D. redundant routers running VRRP

Answer is A

Which would be the preferred way of implementing a loop-free switch network where there are 1500 VLANs defined and there is a need to load share the traffic through two major aggregation points based on VLAN identifier?

a. 802.1D
b. 802.1s
c. 802.1W
d. 802.1AE

Guys (Abdullah and Damien). Where did you get these questions? Are they from new dumps?

Everyone here know your stupid way to make money, fils de pute you, let us in peace

I have exam this week, please email me the latest dump ganguly1274 @ gmail . com

Hi everyone! I have passed and I can show you the proof. Would like to share the valid dump to you guys. Email me at duffsha1 @ gmail.com

@Duffsha,

Why instead of asking for people’s emails, don’t you share your file with all of us? Or do you just want money, money and money?

Hello Friends,

I would really appreciate if you could share the lasted ENCOR Dumps with me to below email address:
habibullah dot salimy @ gmail dot com

Many Thanks for your support and collaboration.

Warm Regards
HB

@Rash and @ Not Sure.
Do you know that conventional oven does not work on wireless. If not then it can not be sources of interference for WI-FI networks

There is no new dump!
we need wait…

What is your latest EXAM update? can yu please share with us. Thanks Alok

The original 802.1D specification assigns what value to a 1 Gbps interface?
a. 1
b. 2
c. 4
d. 19

4 for above question

Hello guys! What can we benefit on the premium member here…?

NJ posted a while back:

There are many new questions, this is not enough to pass alone. I have tried and failed.
some new ones, I don’t have memorized
-LISP drag and drop <—Yes its on
-Purpose of VTEP in VXLAN <— don't recall
-What does RP do for PIM sparse dense mode <— Yup its on
Lots of wireless and SD WAN questions <—yes

The wifi one I recall was a diagram asking what 3D transmitting pattern as an image it's corresponding to, there was some other wifi ones about vlan roaming. Also one about BGP path selection, You will not pass with what is here alone, there needs to be an update.

Hey Guys! I have my exam this weekend.I have been studying the questions on this website.What other study material should i go through ? If anyone has Dumps please share at parthveesangra@gmail .com. Thank you all for your help in advance.

Questions about firepower, mst instance , cisco wsa

Valid dump with 18 new questions

@ 10 new questions
Please send me those dumps with 18 new questions at asfand yar 654 (@) gmail dot com
I have exam this weekend
Remove spaces and bracket

hallo,

Please can someone send me those dumps with 18 news questions.

hiler.tchapmegni@yahoo (dot) com

Remove Spaces and Bracket

Successfully passed!! I have the valid dump that I can share. Please email me at damienduff12 @ hotmail .com

Which algorithms are used to secure REST API from brute attacks and minimize the impact?
A. MD5 algorithm-128 and SHA-384
B. SHA-1, SHA-256, and SHA-512
C. SHA-512 and SHA-384
D. PBKDF2, BCrypt, and SCrypt
Answer: D

Refer to the exhibit.
A client reports being unable to log into the wireless network, which uses PEAPv2. Which two issues appear in the output? (Choose two.)
A. There is a problem with the client supplicant.)
B. The AP has the incorrect RADIUS server address.
C. The AP has lost IP connectivity to the authentication server.
D. The EAP client timeout value should be increased.
E. The authentication server is misconfigured on the controller.
F. The authentication server is misc

@New Question
A, D

Any one wrote the exam this week, and have valid dumps?

hello,

Please can someone send me those dumps with 18 news questions.

{email not allowed} (dot) com

Remove Spaces and Bracket