Share your ENCOR Experience

Question – Why would/should I run spanning tree protocol if I do not have redundant links between switches?

B. Is not correct answer. Correct answer is A. If acl applied on port(where webserver connected) in inbound direction, we should permit return traffic from webserver to client. 209.165.20.225 80 -> 209.165.201.25

A client with IP address 209 16b 201 2b must access a web server on port 80 at 209 I6b.200.22b.To
allow this traffic. an engineer must add a statement to an access control list that is applied in the
inbound direction on the port connecting to the web server Which statement allows this traffic?

A. permit tcp host 209 165 200 225 eq 80 host 209.165.201.25
B. permit tcp host 209 165.201 25 host 209.165.200.225 eq 80
C. permit tcp host 209.165.200 225 It 80 host 209.165.201.25
D. permit tcp host 209.165.200.225 host 209.165.201.25 eq 80

A or B ???? Please help

@router update us. bro

I will be taking the exam tomorrow, I will let you guys know how was the exam.

@router, based off the way the question is worded the access-list is on the interface connected to the web server. Taking it from the perspective of inside the router, client traffic coming into the router from other interfaces can access the web server but traffic from the web server would be blocked unless otherwise permitted. So to allow traffic from the web server to a client using only port 80 you would only permit tcp traffic from host 209.16b.200.22b (web server) to the client 209.16b.201.2b on port 80. So D should be the correct answer.

Randy227 thank you, good explanation.

@router, I want to apologize. I hadn’t actually tested out what is suppose to happen with the access-list being applied. So I stand corrected. “A” is correct. The reason is because the client is accessing the web server using port 80 but the web server is replying back on a random port. Here is what I’m seeing but using port 23 (telnet) instead but you can see what’s happening. You can replace port 23 for port 80. Should work the same.

My access-list applied to the interface connected to the server.

ip access-list extended WEB
permit tcp host 209.165.200.225 host 209.165.201.25 eq telnet log
deny tcp any any log

*May 25 17:24:44.502: %SEC-6-IPACCESSLOGP: list WEB denied tcp 209.165.200.225(23) -> 209.165.201.25(28808), 3 packets

As you can see it was denied. Below is the change to access-list:

permit tcp host 209.165.200.225 eq telnet host 209.165.201.25 log

Below is the result:

*May 25 17:31:14.144: %SEC-6-IPACCESSLOGP: list WEB permitted tcp 209.165.200.225(23) -> 209.165.201.25(60085), 29 packets

Sorry again for not verifying.

Refer to the exhibit. Which HTTP JSON response does the python code output give?

A. NameError: name „json‟ is not defined
B. KeyError „kickstart_ver_str‟
C. 7.61
D. 7.0(3)I7(4)

The attribute ‘kickstart_ver_str’ exist when running the JSON string. Since it exist, then the output is “D”. Does this sound correct or am I missing something?

Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?

A. security group tag ACL aassigned to each port on a switch
B. security group tag number assigned to each port on a network
C. security group tag number assigned to each user on a switch
D. security group tag ACL assigned to each router on a network

Here is what I get from Cisco:

The ultimate goal of Cisco TrustSec technology is to assign a tag (known as a Security Group Tag, or SGT) to the user’s or device’s traffic at ingress (inbound into the network), and then enforce the access policy based on the tag elsewhere in the infrastructure (in the data center, for example). This SGT is used by switches, routers, and firewalls to make forwarding decisions. For instance, an SGT may be assigned to a Guest user, so that Guest traffic may be isolated from non-Guest traffic throughout the infrastructure.

So it looks like “C” is the correct one. Anyone else have a different answer and why?

Hi Team,

I got the premium membership, just wondering how to get the latest dump for ENCOR ?

took exam this morning. 9xx, only missed security 83% and automation 87% questions, meaning some premium questions are wrong. all other topics got 100%. But even if you missed them you will get high 9XX points. All 102 questions from premium. EXACT questions. So take the exam ASAP. Thanks everyone.

@router can you remember which question you think was wrong from premium? are there any new questions?

@router congrats brother!

@router
Thanks for sharing your experience! Can you gmail me premium dump ?
“srb6brs at the rate gmail dot com”

@router Congrats really! would you please email me the premium dump? ” yetihaymi at gmail dot com ” Thanks!

@router
Congratulations!
did you pass the exam in a remote location or in a test center?

Currently overseas, I am service member and I have to take the test in a German Vue Test Center.

If you guys go back 2 or 3 post I posted about 10 questions that differ from premium and Amar dumps. I did not have the right answer for those 10q before I went to the testing center this morning. I guess I answer a few of them right. If you guys find the way to get those questions correct I garantee you will get 100% in each topic. Premium is still valid. If you ask me for Anmar dumps I will send them to you but premium dumps not. It is only $19.00 dollars and come with a testing engine and explanation. No new questions today at my exam, so take the exam ASAP, and I wish good luck. Also cisco press book for this exam is excellent.

Please kindly send me Anmar dumps .
marnet _ hailu @ yahoo.com
Thank you

Could you send me the Anmar dumps please?
cisco.encor @ gmail.com

Thanks in advance and congrats for your achievement!

Hi Team,
I passed the exam last night score 9xx, thru online exam. Just explore this site.
I’ve run through the official guideline book and study every question in the dumps.
Passing the exam is only the beginning, I still have to study and practice all the concepts in the guideline through and through so I could defend the cert in an interview.
Goodluck guy, have fun!

@router would you please email me the Anmar dump? ” yetihaymi at gmail dot com ” Thanks!

I am sorry that I stopped sending the dump because i am afraid the dump is change and i do not have the new dump

dear all
passed 927
dump still valid 102 q

@Anmar would you please email me the new dump whenever you get it? ” yetihaymi at gmail dot com ” Thanks!

passed the exam, everyone, follow the premium is soooooo worth the money!! all questions came up, not all answers a correct at the moment, but it’s enough to pass with 9XX good luck all!

@Mikeyeah Congratulations on passing the exam! but some of us can not be premium members since we can not access the online payment system…. btw did you take the exam today? may 27? cause i read some comments that say the exam has changed.

@yet exam hasn’t change, i have no idea why people are saying it’s going to change soon or it has changed! How do they know exactly when the exam questions will change? Do they have inside knowledge? i doubt it! i’m telling you right now everything in premium is bang on, some of the answers have been update compared to the Anmar dump, but both are good enough to pass as of right NOW.

Hi all, i have to take this new exam , since i make a mistake pass 3 CCNP exam without in 3 yrs period. oh my god, i just found out from the Cisco rep. my first route exam was valid unit 2018. so i have take to exam to make my CCNP valid.

does anyone have CBT nuggets like to share? I like to make a exam quick before end of June since I’m studying cybersecurity in university. I am very appreciate for any help. for sure i will go for the premium membership.
iamyesman @ g ma il . c o m

iamyesman, sent to you the site that I downloaded the courses. google netman 24 ir

Hello,

I have 2 cisco exam vouchers that I have purchased along with collaboration course (for use in the UAE) valid until Feb 2021 (normally extended for 6 months due to Covid-19) which I won’t be able to use as I’m getting promoted to a managerial position therefore I’m willing to sell them to the first interested person:

Cisco PPD 100% off 300-xxx CCNP Concentration exams (original cost is 300$)

Cisco PPD 100% off 350-xxx CCNP Technology Core exams (Original cost is 400$)

I’m willing to sell both together for 500$, payment through paypal please. If interested please let me know your email and I will send you the details, first come first served

Thank you

@fireball2006
we can use the voucher out off the UAE ?

@fireball2006
Can you post your email, I’m interested. thank you i wish to pass tomorrow.

Honestly I don’t know if the vouchers can be used outside the UAE, I purchased them here and that’s why I clearly mentioned it, after that I don’t know how it works for people taking the exam at home for example, technically it should work but I don’t have any previous experience
You can reach me on ahmadbassam dot fr at yahoo dot com

@fireball2006
I sent you an email. I am going to chack if we can use your voucher at home.

A client with IP address 209.165.201.25 must access a web server on port 80 at 209.165.200.225. To allow this traffic, an engineer must add a statement to an access control list that is applied in the inbound direction on the port connecting to the web server. Which statement allows this traffic?
A. permit tcp host 209.165.200.225 eq 80 host 209.165.201.25
B. permit tcp host 209.165.201.25 host 209.165.200.225 eq 80
C. permit tcp host 209.165.200.225 eq 80 host 209.165.201.25
D. permit tcp host 209.165.200.225 host 209.165.201.25 eq 80

Answer: ?????????????

The answer is A. I used this configuration and it worked

interface GigabitEthernet0/0
ip address 209.165.201.1 255.255.255.0
duplex auto
speed auto
!
interface GigabitEthernet0/1
ip address 209.165.200.1 255.255.255.0
ip access-group ENCOR in
duplex auto
speed auto

ip access-list extended ENCOR
permit tcp host 209.165.200.225 eq www host 209.165.201.25

Passed!!
The dump is valid.

Good Luck.

Hello,

Passed today with 9XX. Security 85%, Automation 80%. All other topics 100%.
All 102 questions from premium membership.
Premium membership is worthing 100%!!
Even if just few answers are wrong, you will get more than 900!
Hurry up and take the exam asap and before they change or add questions.

Thanks a lot digitaltut!

Passed with 9XX online. Every single question was on digialtut. I answered identical to on here except for the TrustSec tag as the user vs switchport. And The ACL question of permitting only a range except 80 has a different answer on the test that has the range command in it,, which is the correct one. I had several areas that weren’t 100% so there are a few answers not right on digitaltut. Or as with other Cisco tests, their answer is wrong or ambiguous, but they never admit to that and fix them.

Hello guys
Now I need the latest dump i plan to take the exam next week and the dump that i have i think it changed so i need new dump please my email: anmarjasem61@ gmail.com

@all,

Which is the right answer ? D ?

Which feature must be configured to allow packet capture over Layer 3 infrastructure?
A. VSPAN
B. IPSPAN
C. RSPAN
D. ERSPAN

Hey, @anmar Could you kindly share your dumps with me?

sadasdastin@ gmail.com

@Global, the answer is D.

those that passed did you take it from a test center or the cisco home one they are offering?

the answer to that question is D Erspan

Hey, @anmar Could you kindly share your dumps with
hassoiraq @ windowslive.com.com

Thanks in advance

May 30th, 2020

Hi, @anmar Could you share your dumps with me?
hinbi911 @ gmail.com
I will take a exam… If there is changed… I am also share with you.

I have passed the exam today , my score is 9xx
Every question is on the dump but some answers are wrong on it

@Ra3ed Congratulations, can you tell the wrong Questions? i mean they would appear in the result which part you missed in percentage