Share your ENCOR Experience

Hello guys

I took a test today, and i passed exam

91 questions, (3 new questions)
3 labs (OSPF, VRRP, BGP) you can use the tab key to autocomplete commands, but only some are allowed, I tried configuring HSRP in the VRRP lab to see the MAC (cause I forgot it), but it was not allowed

Premium is all you need to pass the exam, thanks to digitaltut!!!

Today I was taking the exam, but when I was developing a laboratory the platform stopped working, some keys stopped working and the laboratory simulator got stuck. Until that moment I had completed about 64 questions and I was in the third lab, which was BGP (as-override), I had already taken the OSPF and HSRP, several drop and drop questions, finally I couldn’t finish the exam, in the test center created a case for me to reschedule my test, I hope to be able to do it before the 19th

Took 100min to complete exam at the VUE center last week.
Total 91Q + 3 Labs: EMM, OSPF Auth with Diff areas, SPAN & Netflow

Result: “Pass” at the end of exam and then confirmation email, in approx 1/2 hour.
Looks like my cert have been updated on web site for next 3yrs at the same time :)

Almost all Q from premiun section, some of them rephrased, might be a few new…
but no issues if you study appropriately, as recommended and undersatnd technology.

Thanks @digitaltut!

Hi, just took the exam. When should I know if I passed?

@Bucks

You should get a pass fail email

I have passed and get 96%

BGP, OSPF (diff area), and GLBP.Almost all questions are from dumps

freefzile.nzo-izp.fr blank0ut (zz)

Hi all,
Need suggestion on training course for CCIE EI please in London (2nd preference online), also any website like digitaltut for CCIE EI lab ?
Thanks in advance.

in order to solve your investigation abou CCIE EI please reach me at konstantinos.anyf at gmail dot com

passed today!!!!!!!
ospf – network point to point
bgp overide
glbp
all q’s from here

Guyssss!!! Watch out!!! Version 1.1 is rolled out in Florida!!
I took my exam today and faced at least 25 new questions and unfortunately, got failed

@Jordan Cisco said the first date to take the new version of ENCOR exam is September 20th.

@digitaltut do you know if are there new questions for the current exam version?

When I took my CCNA exam, they had rolled out the new version a week early. I am worried they rolled it out earlier then they said. If anyone sees the new version please mention the state again.

When the version of the exam changes, do they also change the entire exam? or do they just add the new questions to the existing question bank? I have that doubt if it will be all new and everything will start from scratch.

I pass today 95% question from premium tut
91 question with 3 lab ospf conf,bgp with r2 configuration, hsrp
I pass with version 1.0

Just passed the exam. Most all the questions are from here. 94q and 3 sim (HSRP – read to see what group number it is, Archive Logging & Netflow, Port-Channel & Native VLAN. Waiting on my email to confirm. Ver 1.0

Just passed the exam. I took the exam a few hours ago and all questions were from here. I got maybe 3 new questions and some other were written differently but the concept was the same.

I Had 3 sim:

– OSPF Interface configuration. No DR and BDR
– VRRP.
– BGP.

Failed the Encore exam today. Made it about 1/2 way and had my exam lock up on me while loading my 1st lab.. Confident I would have passed if I were able to complete the remaining 40+ questions. 95% of the questions were from here. A few new ones thrown in. A few with changes to ips / subnets with the same concepts. I’m awaiting feedback from customer service for a new exam. Looks like I’ll be taking encore 1.1 soon.

The next week, I will have an exam test with 350-401, Could you please share to me the valid dump?

I have looked for it on this page but haven`t found it yet

Just passed the exam. Same old (1.0) questions.
So relax, the new exam is not published yet!

Took my exam yesterday and passed. Got 91 questions and 3 labs: Netflow, GLBP and Port Channel. All questions were from dumps. Thanks digitaltut :)

9/13 Passed

had 91 question and 3 Sims

Sims:
EMM
SPAN & NetFlow
OSPF Multi area / router-id / MD5 Auth

@Bndii, it will be ver 1.0 till 19 sep. After this date you will be no longer on 1.0 version exam.

Could anyone please share me the dumps to nunim8045(at)gmail(dot)com

Can anyone confirm if the DnD here enough to study?

Hey guys, anyone passed 350-401 today?
I am planning to kick this paper tomorrow? Is the dumps still valid? or should I wait for the new updates? Please advise

I plan to take it tomorrow too. I believe all questions still valid until Sep-19th. Good luck to both of us.

@Ola and @Ankido do share your review here when done with exam as I have booked my exam for Monday, Best of luck!

Wrote and passed ENCOR today. Thank you @Digitaltut and team. Premium is 99% valid,
3 SIMS;
SPAN and NetFlow
Port-Channel and Native VLAN
GLBP
(Contextual help “?” and “tab” was working for all of them)

@Ola and @Ankido best of luck for you both looking forward to read your review.
@Hiba that makes two of us let’s beat it down on Monday ;)

Hi. I have passed the exam today. How can I know the detailed of percentage of the result ?

Hi everyone. I have passed the exam today. How can I know the detailed of percentage of the result ?

@shaf10 Can you please share your review

@owais, all of the questions are still valid on premium account. I got HSRP, OSPF Config SIM (no network) and BGP (as-override). About 95% question are on premium account I got on the exam.
The thing is I want to know how do I get to know my overall percentage of my result ? Anyone knows ? Please help

Shaf10, Go to certmetrics.com/cisco
In dashboard, navigate to (Testing History) and click on the exam results. It will take up to three days to publish your exam results. Congratulations

@shaf10 You should have been given a printed copy of your test results that include Pass/Fail, percentages, etc. when leaving the testing center. I’ve taken many exams over the years and have always been giving results during check out.

@Hiba ,
I just passed the exam (91 qns + 3 labs). All questions from this website, and most of them from Part-10 and Part-11. Three laps (VRRP, SPAN-Netflow, and OSPF Authentication SIM). Tabs and questions marks were available.
Good luck

@ Hiba
Passed 91 qns + 3 labs. All of the questions are still valid on premium account. I got Glbp, BGP, span and netFlow. Go ahead and kick it

congratulations! @ola and @ankido and thank you so much for wishing and sharing your experience. cheers.

Still valid. 94 questions from here + 3 sims. Logging, HSRP, and Port-channel

@Pogi and @ola
are the questions mostly just from part 10 & 11?

@Pogi
Yes but don’t forget to go through 1 – 3 because I go like 10 questions from there! and DND

Passed yesterday ( still valid ). 94 question + 3 labs ( span-netflow-sla, glbp qnd bgp)
Study: course provided by cisco + all parts digitaltut ( drag & drop, questions and labs) + some videos about sd-wan.
🤞🏼

Hi @DigitalTut Team,

May we know long it usually takes for the new exam version’s reviewer to be stabilized?
After September 20, how long should we wait to take the exam and use the reviewer here in DigitalTut site?

Thank you.

Passed today, 94Q all were from here, some question were only modified in content. 3 sims(GLBP, OSPF configuration SIM, BGP with as-override)

Passed Today.
94 Questions in Total
3 Labs include OSPF with no DR BDR , BGP as-override, HSRP

Passed the exam
94 random questions from part 10 & 11, Thanks DigitalTut
Labs EEM, OSPF Auth, OSPF Config. Best of Luck to all test takers for the last day V1.0

@ err’body Last day is 19 Sept for current exam

I passed the exam today 94 questions plus 3 labs (IP SLA, VRRP and Ospf with network statements. Best of luck to those who will be writing on the 19th which is the last day to test version 1.0

Today I passed exam.
Labs (3): accounting, HSRP and port channel

Random question (91) only from 10-11 part. Premium.
2:30 hrs
Tab and ? Permit

Exam very easy I studied just this and the last week (10&11) and labs. Premium

Tried to pass it 2 days ago and could not complete, issue to load my next question ((