Share your ENCOR Experience

Hello All!

Practice makes perfect!

Do not give up!

Questions are valid.

Got 3 sims, a few new questions but nothing complicated if you work the concepts!

Prepared for 2 months here and was enough to pass.

>10 years of experience also helped.

Good luck to you all.

Thank you all who contributed and BIG Thanks to the DigitalTUT Team!

Hey guys,
Took an exam today but, stat is pending!!
Any idea?
Thanks

Guys,
I took a test today, 3 new questions. One was regarding ip address to setup jitter if I’m not mistaken, drag and drop question (I never seen under premium) and question regarding antenna (was new to me). I got 3 sims after question #84!! Totally I got 94 questions.
Good luck everyone

@Network_Sailor, thank you for this very useful comment! Helps me a lot.

Passed today!!! thank you so much Digtaltut!!! you guys are the best!!!!

HEY!

hello everyone,
took exam today, some new questions rolled out but, still premium is the best choice!

Passed the exam. Premium is all you need to pass the exam. Got three sims GLBP, Logging and Netflow, Port channel n native vlan. In Glbp lab delay minimum 15 command does not work but you can do it the help of timers command. Some new questions but easy to answer. Good luck to all.

I took my exam and got failed today

Hey!

I’ve passed the ENCOR today!!

Got 3 sims – VRRP, SPAN and Netflow, and OSPF.

There was a couple of new questions but not complicate.

Good luck to all.

Thanks DigitalTut!

Pass exam today. All questions in premium to pass and I did three sims EEM, OSPF with 2 routers no IP address and BGP “as-override”. No new questions!!!

@digitaltut Thank you so much for all supporting in this site.

They told us that new materials coming out?! question less than 94 but with 10 simulations?

Is that true! Please confirm!!

(T_T)

@Jinbei

Who is “they”?

Cisco releases versions 1.1 of the exams on September 19th. About 20% of the content will change. I haven’t seen anything written t say they are going from 3 to 10 sims.

I took the exam yesterday. There were 94 questions and 3 labs (Archive, Port-channel and HSRP). Maybe only 2 questions were not from this site. Thanks admin for the great work and all the explanation.

Hello everyone,
I got failed today, at least 8-11 questions were new. I took a test in Los Angeles. :(((

@Kosmaghz

Did you have any new labs?
How many questions?

@Charlie you welcome here is more question which I counter during exam
which option is used to AP to WLC registration-> Option 43
Which domain used to resolve WLC IP -> CISCO-CAPWAP-CONTROLLER.local
NTP 1 value ->indicated device connected to authorative time source
How traffic forwarded to lisp service site ->ITR
LISP how device info -> RLOC & Endpoint identifier
which device have mapping of EID —> MS
BGP Automation script drag and drop-> present on digital tut
How to avoid shoulder password attack -> service-password encryption

Minimum 5-9 OSPF Questions
adjacency not formed -> incorrect MTU
Exhibit-ospf no neighbour formed ->check passive interface configured
How to prevent OSPF DR BDR -> use IP OSPF Network point to point

EIGRP by default uses which metrics -> bandwidth & delay

Exhibit -BGP neighbor is not forming -> remote as not configured properly

Exhibit -There is question for how influence outgoing BGP traffic -> use default local preference

VRF customer CE router belong to which vrf -> default

I don’t remember all questions and answers and it’s number is huge but I remember somewhat above please check all answer once ..thanks

There is tacacs question how we enable over network -> select AAA list which have radius server defined
How to restrict using local database for console -> use no login under console 0
How to see terminal logs under VTY -> use terminal monitor command

Thank you very much for this content!

P.S. From 19 sept Cisco will release new version of CCNP, if I make appointment for the exam before this date and for X reasons I postpone the exam after 19 sept, do i need to take the exam with older content or with new version of exam topics?

took exam on 24 Aug, i think 94 or 92 question.
sims were HSRP config, OSPF config and BGP config sim, lots of drag and drop.
got new questions maybe 5 to 8. but if you study composite quiz 100 multiple time you should be fine

Question, once the new exam is up, the question database is reset with Q`s from new exam, or it`ll keep on this insame amount of questions (900+) ?? Thanks!

@dkccie: The database will be reset.

which one would you all think about this new change on 20Sep.
Studying and passing the exam before this date on 19 Sep?
Or studying brand new questions with fewer database? Which one you think will be easier?

@digitaltut: thanks! I do have a premium membership, but I’ll hold and wait for the rollout of the new exam, with the new database. If I’d to take it now I’ll need to focus for quite sometime and I won’t be able to spent that much time over the Q’s as I want with the 20+ days deadline. If it was a little longer I would probably take the current exam, but unfortunately the deadline (for me) is close and I wont be able to dedicate the needed time on 900+ Q’s. So yes, answering your question, right now, I prefer the brand new questions with smaller database.

passed the exam on monday, got 1 new DND about MAC ACL and I think 2-3 new multiple choice questions. Some questions from Part 1 – 3. Most are from 4. Sims are OSPF, BGP, Netflow.

@Smith, what was the new DnD MAC ACL question ? can describe it ?

PASSED the exam using this site. All parts valid, just register for a premium.

Make sure to include Parts 1-3 in your review which are scattered in specific topics. Review Parts 4 to 11 by heart.

Lots of DND, 3 SIMS(OSPF AUTH, VRRP, SPAN and NETFLOW). Couple of new questions which you can answer by elimination.

Good luck! Thanks DIGITALTUT.

@Charlie Sep 19 is last date for this exam version questions will obvious updated with new topics which was added in ENCOR

If you technical good and reviewed all material here , I Suggest take the exam

If you don’t feel confident Take around 17-18 again book exam slot in advance if you miss 18th you in big trouble

To be honest extending will increase your stress level so better work go though all questions for 1-2 weeks and try to attempt exam ..good luck

in exam you will meet the same lab scenarios like here?

yes, same scenarios but they might trick you changing vlan IDs names, etc.

I have just recently passed the exam. All the question were from here. Thanks digitaltut

passed the exam a few hours ago.all the questions were from this site.3 labs ospf,bgp and glbp
Thanks digitut

I took my exam here and I got failed. There was some new questions which I never seen them before.

could you tell me please about sim ?

thinking to take the exam tomorrow, anyone pass today by using premium digitaltut? please confirm if any new question and how about the lab?

@Network_Sailor, thanks matte for this info. Im planning to take this exam for sure before 19sep, there no way back :D

Hi All,

I cannot make it to take before Sept 20. I’m not ready and been busy the past few weeks :(
Will the exam will change 100%? or there are just 10-20% additional question?
Any advise when is the best time to get the exam after Sept 20?

Thank you. :)

Hi guys, do you think after 19Sep dumps will be much more less?
Or do I have to deal with additional questions?

Hi everyone,

I have passed the exam on 2nd September. 1 or 2 new questions other than that all were from here. I completed part 4 to part 11, along with the structural parts, and did the big composite exam 4/5 times. I had 3 labs BGP, OSPF (diff area), and GLBP.

Thanks @digitaltut for your help.

Cheers!

@NetWman

Hi, I will apply the exam next 15 Sep…About what the new two questions?

I passed. all question are still value. but 2 question that ( 1 mutiple choices and 1 drg&drop) have 1 more answer compare with premium dump. need learn carefully

I have passed the exam on 5 September.

BGP, OSPF (diff area), and GLBP.Almost all questions are from dumps

Hello @guys

Help please, with 4-11 and LABS in premium version is sufficient? Or we need to study the old questions (1-3) ??

Thank so much.

@CiscoCCNA, according to community premium members who took the this exam, its not recommended to risk without reading full Q&A from 1-11.

@Salman it will be one of those labs from labs mentioned in Premium mebership with minor changes

Is there any new questions got added ?

Thanks diditaltut, same questions from here. got GLBP, port channel, archive + ipflow. passed!!!

Passed the exam, thank you @digitaltut. I had 3 sims: HSRP, Portchannel, SPA & Netflow.
Many question on Automation ( JSON, Python ).
The exam is hard, buth are valuable.
Good loock !

I passed the exam on 05 sept.
Lab sims: OSPF with Authentication (check the key password they tell you to configure) SPAN and netflow, logging and netflow, VRRP. I suggest studying all the labs sims. They are fast to learn.
You can use the question mark and the tap, so if you learn the logical aspect, you can get the commands.

Drag and drop: OSPF vs eigrp, automation, LISP (try to understand all the concepts for LISP, look on YouTube to understand all the components, and also here you can find it), configuration netflow, configuration of bgp, cloud vs onpremise

Questions: LISP questions, OSPF EIGRP, CAM VS TCAM, WIFI, the ones that said the VTP Domain are different on the configuration, the OSPF that said they have different MASK, wifi components (RSSI, EIRP, SNR, WPA3 Personal, EAP, PEAP etc), types of antenna (omnidirectional, yagi), LACP and PAGQ (learn the different configuration modes and you would have multiple questions) , VXLAN (look for the components), LISP for control plane, VXLAN for data plane etc
AP question is part of the overlay.
Data plane and control plane protocol and data plane policy and control plane policy. (If you see policy, the answers is always “statements”
What is SDWAN, vbond as a orchestrator, etc etc.

Hi everybody, today i passed exam, thanks to digitaltut premium all question there are here.