Share your ENCOR Experience

@KosKesh

Are you out of your mind? if you are lazy to study then prepare to fail.
Nothing is earned easy here.
Study all 850+ questions

Passed today. Few questions I never saw before. Labs were hsrp, archive and lacp. Maybe just one or two questions about LISP. Not many programming questions, lot of drag & drop. I knew result right away with percentage I scored in each section. My worst one was security – only 65%. Rest were 90% or above. Premium membership valid.

archive lab, what is this?

archive = logging :)

Passed, almost all (except maybe 1-2) questions from here. Thanks, digitaltut!

@digitaltut to sign for the membership do we need real name etc. details or a dummy should be fine? I don’t want to disclose my details.

Hello, passed today, all from here, I got 3 labs, OSPF, EEM, and BGP. just practice the questions on this portal and you are done. I had one question regarding features on Cisco EDL/EDN (something like that) which I don’t remember seeing here, but the rest of it all from here. Thanks, DIGITUT, keep up the good work. Many Thanks

Passed the exam, digitaltut questions are valid. thank you digitaltut. you may encounter with the weirdest questions so be careful and touch and learn every question you see from here. I think i saw a few questions new and the rest are mostly from here (%95). I was working for 6 months, 3 months are from the official material and 3 months from digital tut. Because I did not want pass the exam just only memorizing the answers. These exams are opportunity to learn new things and stay updated. Practicing from big composite questions (102 questions) from here is good practice. pass the big quizzes at least 10 times as admins say. sims are from here and valid.

@digitaltut you guys are awesome! Thank you for all what you do.

Passed the exam today. Sim VRRP, OSPF BDR, SPAN and NetFlow and tons of drag and drop.

Almost all questions are from here. Handful of new questions but if understand the subject matter

you will have no problem with rephrased questions and choices. Eg, NAC for network access

control on wireless and authentication part

Forgot to add. I encountered more question on SD-Access, Cisco DNA and wireless than any other topics. I don’t know if it helps.

@Joseph everybody is mentioning about 94 questions, Im asking for favor to get all those 94s instead of going all the way through questions. if u have it plz send it to me

@Kos kesh
Stop this. Seriously, just.. stop. You are not making any sense. This section is to share the exam experience, not to beg for non-existent dumps. There is no such thing as a 94q dump, people are mentioning 94 to tell how many questions they got in the exam. As of now the full set is well over 900 questions and almost all of them are in the Premium area.

Sorry for the question, I’ve heard about an update in the version.. what that means? All new questions and labs?

@Damien OMG I was thinking for a month, there is 94Q dump :(((( what should I do now??
plz helpppp

@Kos kesh

hope you understand that those 94 questions in real exam, where picked randomly on questions here premium.

what you need to do in preparation is to memorize the questions and answers..

don’t be stupid everyday bro.. it’s not good for others.

@tired_of_certs Really appreciate it!

Does 94Q on the exam include the Lab sims ? So from 94Q we can expect 3 lab sims…and 91 questions ?
Or is it 94Q + 3 Lab sims as well ?

PASSED!

About a forth of my questions came from the breakout sections (formerly parts 1-3). A handful of questions I have not seen before, including a DnD about FIB and RIB. SIMS were OSPF with 3 devices, BGP R2, and HSRP.

I just passed yesterday

There are 94 questions including 3 labs (EEM, OSPF DR BDR, BGP ( You have to apply the configuration in R2 not the other routers with the same requirements)

Only 2-5 questions are new & out of the premium subscription.

So my advice is to understand the sims very well & practice until you grasp it.

@Rubicon,

What dumps have you used? Thank you!

Today, I passed the exam with a total of 94 questions. I think I got 99% of them from digitaltut. There were three labs: glbp, Archive Logging, and Port-Channel.I didn’t have a cumulative score, only an average from 6 sections: Virtualization 9x%, Architecture 9x%, Infrastructure 9x%, Network 100%, Security 100%, and Automation 100%. Thank you very much DIGITALTUT.

I passed yesterday. all questions in here are valid. only one question was different but if you solve all questions and learn the matters (not memorize) you can easily be successful.
But I want to ask that ı cant see any passing point anywhere. Result of the exam is only “pass” or “fail”?

Don’t listen to anybody pushing dumps from other sites. I just passed ENCOR with Premium here. Just study the questions, UNDERSTAND why they are the correct answers; go over the sims and you will pass. It took 2 weeks of prep.

Passed on the 4th, I think I saw 3 questions that are not on here, otherwise everything was the same. Premium is worth it. I got the SPAN/netflow SIM, OSPF auth with different areas SIM, and the EEM templet SIM.

Just passed this beast, 94Q in total, no grade only “congrats, you passed the exam”. Majority of the questions are from here, a few were worded differently and maybe 2-3 new questions, labs are valid. Labs: Span Flow, OSPF no network, VRRP

passed 1 hour ago. material here is valid. had vrrp, ospf diff area, and span/netflow. thanks. .see you in 3 years.

Is it true that exam will be changed on Sept 19?

Good morning all,

has online Cisco exams any difference with exam center?
(I mean about the questions)

@TasSvo
Same question pool

@Anonymous
The exams chances to encore version 1.1
There will be about 15-20% new questions and content
Check the blueprint

Hi, why i cannot import below in eve-ng? Do I need to have the eve-ng IOS?
I just have eve-ng OVF.

EVE-NG files (IOS used: L3-ADVENTERPRISEK9-M-15.4-2T.bin)

Just passed the exam not sure how. I will be honest, I do networking on regular basis but never touched automation or wireless or sd-wan.
Studied on and off for 2 weeks.
Labs:
Ospf no network
Glbp
Bgp as-override

Hello, I took the exam on 08/08/2023.
I had 94 questions and three labs. Unfortunately, I didn’t take it, apparently the allotted time was not enough for my preparation.
My labs were: “GLBP Configuration Sim”, Archive Logging & NetFlow Sim, and Port-Channel and Native VLAN Sim.
The labs are the ones here on the site (only vlan and assignments have been changed, read the conditions carefully). Well done for that on the site.
Some of the remaining questions were familiar from the site, others were completely new. Lots of questions about automation, drag and drop, ospf, virtualization, everything. There were no questions about STP, RSTP, IP SEC. The last lab was towards the end of the exam, which pressed me a bit for time. I did the labs with the small mistake of the first lab, I forgot to add the “PREEMPT” command in the standby router, I was aware of the preemption, but I had already given the next question. This made me a little hesitant, and I thought about it during the exam. I passed the other two labs successfully. I thought I passed the exam, but I didn’t pass it.
I’m quite disappointed, I’m thinking about going for a second attempt.
Quite a lot of stress about the exam, but I will fight to pass it.
Greetings and good luck to everyone!!!

@Luffy when you say study, is it required to learn the questions and answers by heart? I get to study for more than 2 weeks and I don’t finish ….

My CCNP Routing & Switching expired last April 2022. Does taking a single ENCOR 350-401 exam renew my CCNP Certificate? Thanks!

@CCNP Expired,

No, you need to take one core exam and one concentration exam again.

Passed exam, thank you @Digitaltut !

Premium section here is valid. maybe 2 new questions I hadn’t seen. I had 3 labs EEM Applet, OSPF Different Areas with authentication and manual network statements, Span and Netflow.

The timing on this exam is tight make sure you study everything and repeat the composite tests several times so it saves you time in the exam.

Download EVE-NG and practise the labs, it’s a brilliant piece of kit ! Tab and ? is working in labs.

This site is the best place to get material, no need to look anywhere else, premium 100% worth it.

Today I passed the exam, most of the Question from here. Some of the Questions from non-premium, so please read it.

I passed the exam yesterday. All of the questions were from here and only 2 or 3 of them were new but manageable. Thank you digitaltut for everything. See you in three years.

Pass exam few minutes ago.
Premium si valid. Study all sections and labs.
Labs Span,bgp allowas-in,glbp

It’s worth of money.

passed today. all questions are here (premium account), one ACL D&D was new but easy to find out. EEM Configuration Sim, OSPF Authentication with Different Areas Sim & SPAN & NetFlow Sim i got. don’t remember the score, pass result was more the sufficient for me. good luck everyone, make sure you study properly and practice with Big Composite Quizzes.

I took the exam today labs : EEM,OSPF Authentication with Different Areas and SPAN and NetFlow Sim. Couple of new questions and many D&D .. good luck everyone *

@digitaltut, welldone to you for the content provided here, passed the exam, money well spent, thanks

Passed today!!! All questions from premium!!!
Many DnD questions!!Labs:HSRP,BGP as-override and Ospf sim(no network)
I confirm that if someone passes the composite Big quizzes (15-20 times) and study well the labs 100% success!

Thanks @digitaltut!

Good rest summer to all!!!

Just wondering, is it allowed to take an exam or re-certify on the same day as expiry date?

Ok, just passed the exam! Digitaltut is the best! All questions are here. I got the Portchannel, GLBP and Logging+Netflow for labs! Lots of D&D’s and exhibits. Most of the questions I got came from Parts 8 and 11. Study hard guys and good luck! See you again in 2026!

Just passed the exam today, thank you digitaltut!! Exam is not easy, i really thought i was going to fail. Most of the questions are in premium or maybe all (maybe i just don’t remember because of too much information). I only studied for 2 weeks, i suggest spend more time because 2 weeks is too tight. I got the OSPF diff area, vrrp and span/netflow SIM. Good luck everyone!

guys, please tell me if it is possble to use “show running-config” command on exam SIMs?
Is Tab and “?” working on exam when completing command in SIM CLI?

how to study for ccna exam?

Anonymous: how to study for ccna exam? <== go to 9tut[dot]com

@szprotka

yes my friend, to put you at ease, show run works, tab and ? works all that good stuff cos the simulations are running via a VM, just make sure your ‘copy run start’ before moving onto the next question! if you have time practice in EVE-NG as labs provided on premium