Share your ENCOR Experience

@Ciscokid1

Sorry to hear that.. in order to pass you really know the basics and not memorizing those commands as it would be really risky to take in the exam.

It’s not new questions, I guess those are from the old database bank 1-3.

I keep repeating myself that you need to focus on those coz that one saved me last minute to give it a review

Good luck everyone

I cleared the exam today

LABS I got: VRRP, OSPF Authentication with Diff Area, SPAN & Netflow

I got 15 – 20 questions from Part 1-3 so guys please study this part. DON’T BE LIKE ME!!! HAHA.

I didn’t study part 1-3 i thought i was going to fail but thank GOD!!! DnD was my savior I believed. I got total of 8.

Good luck guys!!!

@Anonymous Are there new questions or are they all here?

@Zenitsu parts 1 -3 are the ones that are divided into categories ? can you answer please

Hello Everybody!! What about the “VRF Configuration Sim (Draft Version)”? is it not showing up on the exam anymore? Is the way it is done here in digitaltut correct? I’m a little bit nervous, it is the only laboratory that I have not mastered and I am not sure if here is correct.

@Zenitsu
There is no part 1-3

Joseph, i did study all the old sections 1 – 3 plus the new ones.

I studied everything for two months and just renewed my membership for this site.

where I can find Parts 1-3? There are only Parts 4-11 in Premium section

@randomguy
That’s what I was thinking, there is no Parts 1-3. I think it has been included under “ENCOR 350-401″ according to the information provided in this site.

@9tut peeps
passed yesterday 96% from these dumps @freefile.no-icccp.fr eliminate cccc

I got 3sims(GLBP,SPAN and NetFlow,OSPF Authentication with Different Areas)

I recertified my CCNP yesterday & received the results 12 hours later, everything you need
to pass the exam is at Digaltut. Thanks again Digaltut!!!!!

Hi @JD, so after you finished your exam you had to wait 12 hours to know if you passed or not? Or you mean the exam details?

for those looking for part 1 -3. From the premium site: Note: The New ENCOR Questions Part 1 to Part 3 have been classified into specific topics (the topics under “ENCOR 350-401” category at the right-side menu (from “Architecture Questions” to “Drag Drop Questions 2”) so we removed them.

I tookthe online proctored exam because the next available appointments were 1&1/2 months away. Cisco say you will receive results within 72 hrs.

Hi Guys, for those who passed one core (ENCOR) and one concentration (ENARSI for example), did you receive the third badge ‘CCNP Enterprise’ on your credly account? Or just the 2 badges for ENCOR and ENARSI?

Everyone needs to look for the availability of on site testing
and book their appointment now or be prepared to take the
online proctored exam.

Passed today, Thank you digitaltut. Couple of new questions rest all from here. I got VRRP Configuration Sim, SPAN and NetFlow Sim and OSPF Authentication with Different Areas Sim.

@digitaltut please update premium asap, looks like there are new questions.

Hello @Everyone
The part 1 – 3 that i was referring to are the questions right beside the site under ENCOR 350-401. There are list of question devided into categories like Architechture Questions, EtherChannel Questions to Drag Drop Questions 2. I believe these are from Part 1 to 3. Hope this helps.

@9tut peeps
passed yesterday 96% from these dumps @freefile.no-icccp.fr eliminte cccc

I got 3sims(GLBP,SPAN and NetFlow,OSPF Authentication with Different Areas)

Does anyone has any idea how long it will take to update in certMetrics after passing the exam?

@Gurung, mine took 24 hours to reflect.

need a strategy on how to use this premium, how long do you study before taking the exam?

Passed last Friday.

3 labs: GLB, Span, netflow, BGP allowas-in.
The questions were all from this site, I think there were a couple of new ones, but I looked up the site after the exam and found them.

Good luck!

P.S. You need to go the entire dump (480+) questions. If you don’t, you’ll think you have new questions.

Would like to know if the premium is still valid? Any new questions as of Today?

@iCharlie

YOU ARE CORRECT! Those people saying new questions but literally those are from databank 1-3. I know its a challenge to remember everything so better repeat everything before the exam.

When i took exam only 3 questions are new but totally so easy as long u know what u study

Passed and succeed my exam last saturday.
A lot of DnD, 3 sims ( HSRP, Archive Logging & NetFlow and Port-Channel and Native VLAN)
Work hard from 1 to 11 to make sure to have it.

Good luck to you all.

Passed Today !! :)

I got 94 Questions.
– 3 sims (OSPF no network command , SPAN & Netflow , VRRP)
– A lot of DnD (DHCP , Orchestration , QoS , SDA , OSPFvsEIGRP , etc.)

I read from digitultut on Premium Member Zone only , confirm its still valid.
Recommend to read all of question that this site provide.

Thanks Digitaltut and Good luck to everyone.

@VRF_LAB
Yes, I had it last week… and the answer here in digitaltut is ok.

Tip: The only way to remember each lab is configuring them yourself (gns3, etc). In my pc I had only one gns3 BGP scenario and only one gns3 OSPF scenario… and I did practice every lab (no switching*) with those 2 scenarios.

* = for switching labs, I used the digitaltut simulator (VIP Zone)

@ADN-BNG How much study time? Did you study 10 hours a day?

Can someone please give the correct configurations for R10 and R20 on VRF Configuration Sim (Draft Version)?

Hi @Anonymous, please see the Damien´s comments about the VRF Configuration Sim in that part of web. I have used in eve-ng and its working. For me looks Ok (there not the exact details about these lab). I have taken the exam yesterday and the VRF LAB was not part of them.

Hi guys! I passed yesterday! Digitaltut is completely valid! The premium suscription worth it every dolar you pay. My recomendation to study, is go section by section (All of them, part 1-3 and 4 to 10), learn the concept and later focus in the questions are more “difficult to understand”. Make a test part by part, because you will be sure you are practicing all the question. The big composite questions are very helpful but as is a random questions, it is possible that no all the question are covered (and some will be repeated).

About the lab it’s easy, practice using eve-ng and the digitaltut files because I like to understand and see the effect of all the commands (plus you can use show and other commands). But you can use the simulator.

94Q, 3 Labs (VRRP, OSPF Different areas and SPAN and Netflow.

Study from here and will be ok.

Good Look!

@Anonymous

I pasted the correct configuration in the comments in the lab page

Hello team, good morning yesterday I took my CCNP ENCOR certification exam (94 questions), and I want to thank the 9tut team because their material is 100% recommended and reliable, but you must have the premium membership.

Additionally I recommend once you have studied all the sections, start practicing the composite quizzes and repeat them about 30 times in order to increase the probability of mastering 97.8% of all possible questions and gain confidence and security during the presentation of the exam. (The latter is at your own discretion and consideration, in the end it will depend on how you feel for the exam).

During the exam execution I had 3 Labs: Archive and net flow, HSRP and port-channel and native vlan. If you practice the ones that come here I am sure you will master them with no problem.

Much success and if you commit to yourself you will succeed.

Blessings to all.

Thanks Digitaltut
I pass my exams today.
Questions here are valid
94 Q + 3 Sim :EEM,OSPF Configuration Sim,OSPF Authentication with Different Areas

Hello! The link for the pdf is no longer available? Could someone please share?

Digitaltut states clearly that the incorparated Part 1 – 3 question into the other questions!

” Note:
+ Currently there are two to three lab sims in this exam. You can use “tab” and “?” in the simulations of the exam.
+ We removed New ENCOR Questions – Part 1 to Part 3 as they have been classified into specific topics under “ENCOR 350-401” category at the right-side menu (from “Architecture Questions” to “Drag Drop Questions 2”).°

Passed my exams today. 94 Question 3 Labs (Archive Logging, GLBP, PortChannel Native VLAN) Did composite quizzes like 10+ times until able to score 95 97%.

Premium Membership is worth it and questions are valid. Thank you! Good Luck to all, you can do it! Believe in yourself!

Hello, passed on the exam this week!

94 Question
3 Labs (BGP – As-override, EMM, OSPF Authentication)

Studied all the topics (from Architecture to Drag Drop questions), and ENCOR questions from part 4 to 11.

Did the composite quiz many times until my score starts to be around 90~95%.

I saw 2 new questions but very easy and similiar to the Premium questions.

Premium Membership is very helpful in order to do the composite quizzes simulating the real test.

Thank you!

Hi All, thanks to digitaltut passed today !!!!
94 Qs + 3 Labs (BGP-as-override, HSRP and OSPF Config)
Some of D&Ds were Part2-Q1,16/Part9-Q57/Part10-Q29,43,67
1 new question:
Engineer has to configure Multicast UDP Jitter
ip sla 1
udp jitter 10.0.0.1 source-ip 192.168.1.1
Questions were from all the Topics and Part 4-11.
All the Topics and Part 4-11 make up around 890Qs

I just passed the exam yesterday.
I have some new Q&A encountered that I have never seen from the dumps here but it is only a few.
The majority was actually on the composite quizzes.
I got 3 Sim Labs, EEM, BGP-override, and OSPF-interface applications without DR/BDP election.

Thank you @Digitaltut for this content. It helped me to pass my Encor Exam.
No waste to invest here!

CCNP Enterprice will go actualized after 20 Septembre?

Passed today. 3 SIMs – VRRP, OSPF (single-area), BGG (allowas-in). THere were 3 – 4 questions, which I don’t remember seeing in here.

in the exam can i use “show” commands, “?” or tab?

Been three days still no update on CertMetrics. How long did you guys wait for the results and to get the updated expiry status of your certificaitons?

Passed today at 98%!
94 Qs, 3 Sims (OSPF multiarea, SPAN and Netflow and VRRP)
1 off Q but very easy, the rest are all here!

@Xploit, yes you can use show commands in the exam.

Hi guys I passed the exam yesterday I get 3 lap ospf. HSRP. BGP
exam is very easy