Share your ENCOR Experience

@Marsha, the main idea is to post here all questions and doubts about any question or lab for this ENCOR exam. Feel free to post them here and we can solve them :)

I took the exam today, June 15, 2023, and just passed. This dump is still valid.

I got the below sims.
ospf sims (need to configure using netwtork)
vrrp configuration sim (same with digital tut)
span and netflow sim (same with digital tut)

Drag and drop and Q and A are all the same except for 1 question, but I can’t remember it anymore; I don’t see it here on the page.

But I’m wondering why my certificate expiration date did not change when I checked. any idea?

Just read and study everything on this page, and you are good to go. Good luck, guys.

I cleared my exam today. Thank you DigitalTut.

Don’t forget the part 1-3 questions. I noticed them a week before the exam. There are still questions from that section as well.

I got two new MCQs, but the rest are from here under premium. One of them is regarding YANG. I can’t recall that question from the dump.
The other one is about SD-WAN. It’s not from the premium. The question was about why vBond requires the internet.

Three LABs
Port-Channel and Native VLAN Sim
VRRP Configuration Sim
OSPF Authentication Sim (Without Authentication)

Overall, digitaltut premium is adequate for the exam. Practice the question multiple times until you get the full score for each part. You will be fine for the exam. All the best.

Thanks Digitaltut!!!
I passed the exam this morning with labs:
EEM
OSPF authentication
OSPF authentication with Diff Areas

I took the exam yesterday and passed.

3 Labs:
GLBP
BGP configuration only on R2
OSPF Configuration

Thanks Digitaltut!

I took the exam today and passed. 94 questions

I thought I failed because I could not remember the “event manager” command on the EEM SIM, I tried “?” but it was hard to sift through the text so I just ended the question.

PREMIUM IS WORTH IT! Don’t both with the scams people put in the comments.

I did questions 4 – 11 and 102 Composite Quizzes as much as I could staying up late most days. I took on average 28 mins each time to complete them. The questions I got wrong I kept studying them over and over again.

Also do the 20 min Composite Quizzes as these helped too.

BGP R2 SIM
EEM SIM
OSPF (no network command SIM)

I heard that most of the exam silabus and questions are changing from July 1st. Is it true?
Just wanted to know because I’m preparing for exams and plan to give exam in mid July.

@DontWorry
First of all, congrats
Do you think that doing questions 4 – 11 and 102 Composite is enough for the exam ?

@CT
Thanks :-)
Yes, but also when you do the Composite Quizzes at the bottom it will say “New ENCOR Questions – Question 21 to 50” Do these as they were the closest to the real exam and a bit more manageable to learn.
GOOD LUCK!!!

@Gurung

Don’t worry, new exam’s date is September 20 2023… So, last day to take current version it’s September 19 2023.

exam passed 100%!!! there are new questions about drag and drop on premises vs cloud, 1 wireless, 1 automation, about SDWAN but if you’ve studied the theory too they’re not difficult. for lab sims: EEM, OSPF with authentication and IP SLA, SPAN and NETFLOW

@GurungJune

The test doesn’t change until September 20th. See Cisco’s site about encore and enasri versions 1.1

Took the exam today and passed! :)

94Q & 3 Labs: EEM, OSPF, OSPF Authentication with different areas.

passed today.
94q + 3 Labs: VRRP, OSPF authentication with different areas and IP SLA, SPAN and NetFlow

few new question but easy stuff.
good luck everyone!

Hello,
I need the Exam only for a partner status.
It is enough to learn the questions from the “Big Composite Quiz”?

passed last week
94Q & 3 Labs: EEM, OSPF, OSPF Authentication with different areas. a few new questions

I passed my exam today. I will say this site is about 90% accurate I had 10 questions I know were not apart of the premium version.
My Lab sims were HSRP, EMM, Port Channel and Native vlan; on Port channel and Native vlan be sure to configure both switch port channel to native vlan 10. Premium only has it on one.
Now Drag and drop was a killer. I got 8 of them. so study all of the drag and drops on this site.

lastly Cisco no longer tell you your percentage when you pass. You just pass or fail but they do give you a score report with section analysis I got 60% in 4 of the 6 sections I got 87% on infrastructure and 73% on Architecture. I really thought I failed it. Over all if you really study this content in premium you will be fine. I only studied for 3 weeks.

Hi Friends, how to get the 94Q, please help..!

Hello dears , Today I passed the exam , 94Q , 3 Labs , OSPF Multiple Area with Authentication,VRRP,SPAN & NETFLOW.

Thanks to DigitalTut team

Hello for everyone who passed the 350-401 exam, I want to know what dump they used.
I want an updated dump.
THANKS

Hello everyone, can I have a copy of the latest dump?

Where can I have the latest dump?

Every body
please give me the link to pay a valid dump

Is there no one here to share the dumps, only sharing their success stories and thanking digitaltut. How do we believe these stories.

How do you gain access to premium?

@General
@Junior1
@All

The premium Dumps are available by logging into the site
Located in the upper right hand corner.

Hi @Oz, please help me with this.

OSPF Configuration Sim
Why I cannot config OSPF. I tried it but it says
“Router process 1 is not running, please configure a router-id”

Logging and NetFlow Sim
For Logging and NetFlow Sim, not working for me :(
What switch are you using if simulator is on GNS3?

When I type ———> ip route-p route-cache flow, router cannot detect it :(
% Invalid input detected at ‘^’ marker.

The information you have entered is incorrect. Username [{email not allowed}] does not exist in database
========================
Yesterday i was connected (success connection)

I don’t no why?
And i can’t reset also my password.
thank

@Junior1: Please send an email to support@digitaltut.com with your username so that we can help you.

–The information you have entered is incorrect. Username [{email not allowed}] does not exist in database
========================
Yesterday i was connected (success connection)

I don’t no why?
And i can’t reset also my password.
thank

Hello Guys,

I passed today. 3 Sim, BGP configuration SIM R1 and R3 (allowas-in), SPAN & NetFlow Sim, GLBP Configuration Sim (with preempt delay min)

94Q
Drag and drop and Q

Informations here is is still valid

passed today 3 sim, ospf config, vrrp and span/netflow
94q
premium is the way to go

Hello, the premium Dumps here is a VCE file or PDF? or what? thank you.

passed today
I got 3sims(GLBP,SPAN and NetFlow,OSPF Authentication with Different Areas)
All questions fron here. Thank you

How many questions are in the premium sub of Digitaltut ?

@digitaltut
Is the dumps still valid? Last update was May, is there any updated dumps for this Month?

PASSED!

All dumps are legit! I suggest review ALL Materials in the premium section.

The one that saved me was reviewing again part 1-4 as all my questions are from there.

LAB : Tab Key is working so need to memorize the config as long you know it.

Lab: Logging and Netflow, HSRP and Port-channel and native vlan

My result was out after 2 days! so i need to endure all the agony of waiting!

is premium 4 to 11 enough or we have to prepare all questions in the right side also?

What’s this 94Q dump you guys are talking about? And yes, I have Premium.

@mannu

Do all the questions in the premium 4 – 11 and the questions in the table below & also the sims on the right side.
The questions on the right side are the questions on the table below

If u want all to pass then study all materials in Premium section. Dont regret once u fail it then u will see some questions are from premium 1-3. Remember! Those items are also new materials 1-3! they just categorize it

@Mannu

94Q in total for the exam.
That would include Lab, QnA and DnD

Morning Alls,
Please need help.
last week I paid $35.00 for 2 months to be member in the plateforme.
But I can’t access to member page.
——————————–
Below the error message,
The information you have entered is incorrect.
Username [{email not allowed}] does not exist in database
———————–
NB: I sent email to the digitut support last friday, but they didn’t answear to me.
——————-
I dont no why?

@Junior1: It seems we did not receive your email. Please resend your email or give us your username or Invoice ID so that we can help you.

Just passed today. I got VRRP, single area OSPF, and top-flow-talkers sims. I only didn’t recognize maybe 5 questions. Studied all questions but mainly focused on the newer questions.

Hi guys,

Where can I find ENWLSI 300-430 dumps?

I have booked my exam in next week. How can I get the ENCORE dumps.

I passed a few days ago.
Thank you, @digitaltut for that Premium Section… this is the way.

This exam was very particular, because with so many questions, it is not enough to memorize the answers, you have to understand them.

I had 91Q + 3 labs (EEM, VRF-Tunnel GRE and VRRP)

See you.

@digitaltut: May i know where I can get the premium section?

Thanks,

You login then buy premium