Share your ENCOR Experience
The new ENCOR 350-401 has come to replace the old CCNP exams so we create the “Share your ENCOR Experience” for everyone to share their experience to prepare for this new exam.
Please share with us your experience to prepare for the new ENCOR 350-401 exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note:
+ The ENCOR 350-401 exam include lab sims, multiple choice and Drag drop questions.
+ To get the new CCNP Enterprise certificate, you need to pass this ENCOR 350-401 exam (core exam) and one of the concentration exam.
Your posts are warmly welcome! Hope you will find useful information here!
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server. Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures. Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required. Examples of type 2 hypervisor are VMware Workstation (which can run on Windows, Mac and Linux) or Microsoft Virtual PC (only runs on Windows).
Is there anybody who was test dump 124Q quetions?
When you change the HSRP version, Cisco NX-OS reinitializes the group because it now has a new virtual MAC address. HSRP version 1 uses the MAC address range 0000.0C07.ACxx while HSRP version 2 uses the MAC address range 0000.0C9F.F0xx.
HSRP supports interface tracking which allows to specify another interface on the router for the HSRP process to monitor in order to alter the HSRP priority for a given grou
he “enable secret” password is always encrypted (independent of the “service password-encryption” command) using MD5 hash algorithm. The “enable password” does not encrypt the password and can be view in clear text in the running-config. In order to encrypt the “enable password”, use the “service password-encryption” command. This command will encrypt the passwords by using the Vigenere encryption algorithm. Unfortunately, the Vigenere encryption method is cryptographically weak and trivial to reverse.
@Iraklis can you send me the dump my email
dredv @ gmx.net
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag (SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group. This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile
The IP protocol was designed for use on a wide variety of transmission links. Although the maximum length of an IP datagram is 65535, most transmission links enforce a smaller maximum packet length limit, called an MTU. The value of the MTU depends on the type of the transmission link. The design of IP accommodates MTU differences since it allows routers to fragment IP datagrams as necessary. The receiving station is responsible for the reassembly of the fragments back into the original full size IP datagram.
The fourth octet is 255 (all 1 bits) that means I don’t care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let’s consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a “1” (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a “0” (0000 0000) then only even numbers are allowed.
he TCP Maximum Segment Size (TCP MSS) defines the maximum amount of data that a host is willing to accept in a single TCP/IP datagram. This TCP/IP datagram might be fragmented at the IP layer. The MSS value is sent as a TCP header option only in TCP SYN segments. Each side of a TCP connection reports its MSS value to the other side. Contrary to popular belief, the MSS value is not negotiated between hosts. The sending host is required to limit the size of data in a single TCP segment to a value less than or equal to the MSS reported by the receiving host.
TCP MSS takes care of fragmentation at the two endpoints of a TCP connection, but it does not handle the case where there is a smaller MTU link in the middle between these two endpoints. PMTUD was developed in order to avoid fragmentation in the path between the endpoints. It is used to dynamically determine the lowest MTU along the path from a packet’s source to its destination
The BGP session may report in the following states
1 – Idle: the initial state of a BGP connection. In this state, the BGP speaker is waiting for a BGP start event, generally either the establishment of a TCP connection or the re-establishment of a previous connection. Once the connection is established, BGP moves to the next state.
2 – Connect: In this state, BGP is waiting for the TCP connection to be formed. If the TCP connection completes, BGP will move to the OpenSent stage; if the connection cannot complete, BGP goes to Active
3 – Active: In the Active state, the BGP speaker is attempting to initiate a TCP session with the BGP speaker it wants to peer with. If this can be done, the BGP state goes to OpenSent state.
4 – OpenSent: the BGP speaker is waiting to receive an OPEN message from the remote BGP speaker
5 – OpenConfirm: Once the BGP speaker receives the OPEN message and no error is detected, the BGP speaker sends a KEEPALIVE message to the remote BGP speaker
6 – Established: All of the neighbor negotiations are complete. You will see a number, which tells us the number of prefixes the router has received from a neighbor or peer group.
And,
by the way,
those who has left e-mail address here,
please checking your mail inbox or other folders in your e-mail.
good luck!
Weighted Random Early Detection (WRED) is just a congestion avoidance mechanism. WRED drops packets selectively based on IP precedence. Edge routers assign IP precedences to packets as they enter the network. When a packet arrives, the following events occur:
1. The average queue size is calculated.
2. If the average is less than the minimum queue threshold, the arriving packet is queued.
3. If the average is between the minimum queue threshold for that type of traffic and the maximum threshold for the interface, the packet is either dropped or queued, depending on the packet drop probability for that type of traffic.
4. If the average queue size is greater than the maximum threshold, the packet is droppe
From the “show vlan brief” we learn that Finance belongs to VLAN 110 and all VLANs (from 1 to 1005) are allowed to traverse the trunk (port-channel 1). Therefore we have to remove VLAN 110 from the allowed VLAN list with the “switchport trunk allowed vlan remove ” command. The pruning feature cannot do this job as Finance VLAN is active
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site
IP SLAs allows Cisco customers to analyze IP service levels for IP applications and services, to increase productivity, to lower operational costs, and to reduce the frequency of network outages. IP SLAs uses active traffic monitoring–the generation of traffic in a continuous, reliable, and predictable manner–for measuring network performance.
Hi All,
I am creating a ENCORE exam study group on ha n g ou t. if anyone is interesting to join please send me an e-mail with brief introduction about you. My email ciscoxam (at) gmail (dot) com
Where can I get the ENCOR questions for the answers shown in this website?
hello guys, does anyone have materials or dumps from the new ccnp encor 200-401 exam to share?
from already thank you.
@ Dipo Chaponda please send dump to runny85 (at) hotmail (dot) com Thanks!!
anyone has got any dump for CCNP Enterprise ENCORE 350-401, please share with me . Thanks.
i can’t find a cracked version of vce 1.1.2 to open that 350-401 vce. can someone please post a link to download vce 1.1.2? i tried with 1.0.2 and it did not work.
Thanks
anyone have a working version of vce?
@ Dipo Chaponda please send dump to an.luu12 (at) yahoo (dot) com Thanks!!
@Dipo Chaponda,
Why don’t you put a link to that file here for everyone in this forum?
Or are you going to send pure spam by mail?
HelloALL
any one passed this week exam cisco 350-401 !! please can give feedback if it have update
Hi All,
Are these the latest questions? Anyone has taken the exam soon?
it is no update
i passed this week it is only 100 question stop to say number of question
so please it is spam
Hello, in premium membership have all questions to new 350-401?
Anyone who where can I get the SIM and questions, also the premium subscription are all the questions are include.
ALL centre pearson vue are close , so stop to say that you passed the exam but all center are close
Please give feedback about update question
https://home.pearsonvue.com/coronavirus-update#health-and-safety
Please Share CBT Nuggets CCNP Enterprise Infrastructure Videos link @Broadcast to anyone who can do so
Hi guys,
anyone can suggest me how to find original course? 1k$ it’s too high for me.
Or maybe some good alternative.
TY
EM
Friends, how to recertified current CCNP? Is it enough to pass the one professional concentration exam? Or it is necessary to pass core exam: 350-401?
@EMero , I have downloaded Ebook: CCNP and CCIE Enterprise Core – 350-401 , may be this book will be relevant for you?
Does anyone know any website like this for CompTIA dumps?
The number of paths used is limited by the number of entries the routing protocol puts in the routing table, the default in IOS is 4 entries for most IP routing protocols with the exception of BGP, where it is one entry. The maximum number that can be configured is 6 different path
A VRRP router receiving a packet with the TTL not equal to 255 must discard the packet (only one possible hop)
The Cisco TrustSec solution simplifies the provisioning and management of network access control through the use of software-defined segmentation to classify network traffic and enforce policies for more flexible access controls. Traffic classification is based on endpoint identity, not IP address, enabling policy change without net-work redesign
Hi all,
QUESTION 33 Which behavior can be expected when the HSRP version is
changed from 1 to 2?
A. No changes occur because the standby router is upgraded before the active router.
B. No changes occur because version 1 and 2 use the same virtual MAC OUI.
C. Each HSRP group reinitializes because the virtual MAC address has changed.
D. Each HSRP group reinitializes because the multicast address has changed.
Correct Answer: C <<< This is de answer in the pdf 100q but in the ENCORE book it also states that the multicast address changes from 224.0.0.2 to 224.0.0.102, so answer D would also be correct. So which one would you choose?
Hi Sam. I’ve used passcomptia.com before to pass an exam. It’s free too. Which exam are you planning to take?
Kindly let me know if any one pass the exam with a valid dump.
i am premium member
but where are the sims which is coming in ccnp encore exam….
here only showing the ccnp route sim…
@xyz
There isn’t any sims in the encor exam, only questions
thank you for replying
there are no labs even?
I am planning to take the Network+
Hello, in premium membership have all questions to new 350-401?
@Iraklis can you send me the dump my email simonemieje at yahoo dot com
Hi All,
I have just taken the exam yesterday and I passed with 927/100.
The passing score required is 825.
the exam was 102 questions.
All the questions here are valid. but while studying take care that some answers were not accurate.
Which dumps are you friends referring to? All the links posted here are expired or the files have been deleted. Could someone reupload the questions please?