Share your ENCOR Experience

pass the exam today, encountered 3 Sims (EEM, OSPF w/ authentication but using network, Netflow + SPAN). There are some quesiton that’s new to me, maybe around 5 question, the rest are same here in reviewer.

hi guys, finished the exam one hour ago and passed the exam. I can say that there are 10 questions that I never read here. I recommend to keep studying the long composite exam ( 100 qs) and makes sure to get 90% or above for at least 10 times.
One new question that I remember is what mode is the AP if needs to troubleshoot for pcap?
should be local.

The sims I got are:
1. EEM ( as is with here)
2. BGP ( using only R2, as is with here)
3. OSPF without authentication ( same here)

Goodluck to those who are taking the exam. I can say I find it hard but as long
as you master all the Lab sims here, you are good. The tricky part is all the SD wan questions.

You can do it guys and thank you @digitaltut

my subscription is worth it 😆

Still valid! I had about 5 new questions. The SIMS I got where: HSRP (different priority), logging/Netflow (same as on here) and the Port-channel (same as on here).

Thank you @digitaltut!

To everyone who cleared recently? Do most of the questions come from the long New ENCOR questions listed here?
Or from the existing older ones?

Passed an hour ago.
Question are all valid. I have about 10 new question, but nothing fear.
I have passed with 100% many times the exams in the composite queses.
Make sure that you know the concept and the logic of the questions.

3 labs. OSPF (with authentication and using “network” in the commands); OSPF (without authentication and without using “network” in the commands) and EEM applet (same as here).

Thank you very much @digitaltut!

@Tommy for mine, most did come from 4-10. I would say roughly more than half. The other portion came from the specific topics.

Did anyone do the exam recently, are the questions still valid?

Hi, Where can I find labs here? (or it is only available with subscribtion)

@GoshoPeshov

Do you have any idea which config we should use for OSPF (with authentication and using “network” in the commands), that you got in the exam, over here there is no OSPF lab with the “Network” command

@Hasmas I passed on the 26th. yes it’s still valid.

Passed the exam today! Thanks @digitaltut!

Hello all – Quick question – How many total questions are there under the Premium dumps ? Thanks

Hello – From the dumps what is the ans to the below question :

When a wireless client roams between two different wireless controllers, a network connectivity outage is experience for a period of time. Which
configuration issue would cause this problem?

@Kate

Altogether probably 600 – 700 questions

@Mr Quick
The ans is B

Passed today!
Thanks Digital Tut!!
Maybe 5 questions I’ve never seen.

3 Sims:
HSRP
-same as here, think dif IP and priority; really easy
-dont forget “preempt”
OSPF Configuration
-same as here, no network statements
-almost forgot to apply it to the Loopback interfaces
BGP
-only able to make changes on R2
-used “as-override” for each neighbor under the ipv4 address family settings.
-first time I tested (and failed) had the inverse of this sim. Where you could only make changes on R1 and R3. So make sure you know both.

————–
Okay, not recommended. But! The highest score I ever got on the big composite test was a 79%. So it is possible. However; I was stressed out going in.

If you want to feel good and know you’ll pass; getting a 85-90+ on the practice composite test will def make sure you do.
And know the SIM material!

Best of luck!

Again, I am asking the same question below. Please reply to me ASAP. Thanks

Do you have any idea which config we should use for OSPF (with authentication and using “network” in the commands), that you got in the exam, over here there is no OSPF lab with the “Network” command

Thanks Tommy :) – @All , quick one. Is Digitaltut no longer going to upload the dumps PDF to the open site which it used to in the past under FAQs ? Just checking…

Friends – Just need a quick moment of your time. I am no longer a Premium Member. I do have the PDF though from past. Just need to verify if it is the correct and the latest one before my exam. Can someone please confirm below ? Really appreciate it : )

First Question is :
Which option must be used to support a WLC with an IPv6 management address and 100 Cisco Aironet 2800 Series access points that will use DHCP to register?

Final Question is :
Drag and drop the LIPS components on the left to the correct description on the right.

Also the name of the PDF is “ENCOR_Jun_2022” Please confirm my friends :)

Hello Digitaltut – Just like the old days if you can upload just the PDF to the non-premium site then that would be very very helpful for some who cannot go for premium. Apologies for any inconvenience. Keep up the great work.

@CHEETAH

I saw your question previously to @Gosho.
Not sure what exactly you are asking. I did not have that sim.

My OSPF sim was NOT using network statement. Which means you just apply the ospf areas to the interface.
In my case all the interfaces including loopbacks.

If you have to use network statements, you just add the network under “router ospf #”
(Config)#router ospf 1
(Router-ospf)#network x.x.x.x x.x.x.x area 0

It’s really not that hard. Watch some videos on configuring OSPF.

The authentication is explained pretty good in the digitaltut lab here (premium membership).

Just passed the exam. Couldn’t have done it without Digitaltut!! Digitaltut still valid. There were about 8-9 new questions but easy if you know the concepts.

3 SIMS
HSRP: Same as here with different IP and priority
Logging and Netlow: Same as here (use ip flow ingress)
Port Channel and Native VLAN: Same as here

Premium membership is the way to go.

Hello, today I passed my exam, thanks Digitaltut!! 3sim vrrp,ospf,bgp, very few new questions but if you analyze them with pure logic the answers are correct. Blessings to all!

I passed the exam today.
The score for each item ranged from 60 to 85, and unfortunately, it was not possible to score high.
I think it’s a miracle that I passed.
More than half of the questions are from this site.
The rap test…
OSPF Configuration Sim
EEM Configuration Sim
SPAN & NetFlow Sim
I think the EEM was somewhat different.

Kudos to all the peeps that have recently passed. Can anyone advise roughly how many drag and drops you’re getting on the exam? Tis the one part I’m struggling with when doing the quizzes. Thanks in advance

Hi @Pedro

I had about 10-15 D&D

Passed the exam today, i had alot of new questions to be honest.
Though if u understand the principles it is most certainly possible.
Sims: hsrp, different group and prio
Channel, native vlan and stp
Archive / flow

As posted many times, make sure u pass and atleast understand the big quiz multiple times.

Gl all!

Hi All,
I am preparing for the exam and just switched to this website. Can anybody please help me for the dumps for 350-401 ENCOR exam. I just want to test myself.
Thanks you.
{email not allowed}

Hi All,
I am preparing for the exam and just switched to this website. Can anybody please help me for the dumps for 350-401 ENCOR exam. I just want to test myself.
Thanks you.

trustwork801 atgmail

I clear the exam today… I gotta say this site is very useful.
The exam was ok. Please read the questions well as some of them are tricky!

Some new questions but all good.

Passed the exam on Mar 2nd, dumps are still valid. 98 Qs including 3 labs BGP version 1, OSPF version 1 and VRRP. Labs are exactly the same as in this website. Had few new questions so I advise to check the Part 10 Questions 87 – 110

passed the exam few days ago, this site is valid, got 3 sim simliar to this site, VRRP, OSPF and BGP

Is there a .vce version of the question that I can use to practice offline with. Appreciate your help guys!

@Sisienpi, would it be possible to have a copy of the dumps you used to study?

Hello all – I am new to Networking. Just curious to know if there are any risks of subscribing to Premium since we are using Exam Dumps. Please let me know. Thanks

Hello friends – Is there any other website that you know of which shares the same Dumps ? Just little nervous about subscribing to Premium. Cheers

@Sisienpi – Could you please share a copy of the dumps which you used to study ? Just need the PDF version. Thanks anyways :)

@Admin – Please update the non-premium site with the PDF copy of the dumps. It would be of great help to those who cannot go for Premium or are not comfortable with Premium. Thank You for the hard work.

Digitaltut still valid. 3-4 questions different. All sims are exactly like cli, so you can use ? to help with configurations. 3 sims GLBP, logging, and port channel. All exactly the same as on here.

Hi, Congratulation those passing their exams.
Kindly if anybody could send me 98Q in PDF at my mail. I also studding ENCOR
trustwork801 @ Gmail

how can i fine dum for the exam?

@Sammy

There is no 98Q PDF. There are around 600-700 questions on the website ranging from various topics. You have to enter each of the section and study the questions.

@Jmmac

Congratulations on passing the exam! Do you recall if most of the questions are from the ENCOR parts 4-10 or from the older ENCOR questions?

Hi, How many points need to pass? and where can i find the exams please?

Just passed the exam. Thanks Digitaltut!! Digitaltut still valid. There were about 2-3 new questions but easy if you know the concepts.

3 SIMS
GLBP: Same as here with different priority
BGP: Same as here version (R1/R3) allowas-in
SPAN & NetFlow Sim (Top-talkes/top 50/sort-by packets/cache-timeout): Same as here

Premium membership is the way to go.

Hello Guys, Just want to clarify on what is use Network command in OSPF. command like this
network x.x.x.x x.x.x.x area x?

Question guys, may cert expire tomorrow. If I take the exam tomorrow and then I pass, my cert will renew since I take the exam on the exact expiration date.

@black mamba, yes I raised this query with Cisco, if you take it on the date of expiry. it will renew.
So if you schedule your exam earlier in the day tomorrow. you should be good.

Passed today Digitaltut is still 100& valid, just about 5 new question but they are easy to answer.

i also got 3 SIMS
GLBP: Same as here with different priority
BGP: Same as here version (R1/R3) allowas-in
SPAN & NetFlow Sim (the 3 Task)

What God can not do does not exist.