Share your ENCOR Experience

@Leda @NoOne

You must pay a subscription!!!! Pay a little for your future, don’t be clean….

Anyone can share these dumps? Thanks!

I will share it with you if you give me $19 dollars?

Hello

I passed my exam on friday. So 95% of the questions are on this site. I had GLBP, BGP, and Monitoring SIM. The monitoring had the same content as here, but not all of it, ie required archiving and applying netflow, but the top talkers was already configured. The new questions were actually based on the questions already here, just asking a different thing about the same topic.
If you prepare well, and understand the concepts, then you cannot fail

@EnPe
I see many wrong answers in other sources. Follow preparation guide and learn the concept and you are good to go…

Can I download the questions in PDF?

Hi All, please help to advise is the question here is still valid to pass the exam on Feb2023. Really appreciate all feedback. If its not valid anymore, @digitaltut we need an update here. Thanks all.

@digitaltut any update with the new questions?
Our subscription deserves a fair response.

any update guys?
still valid?

This is a good resource. Pleas understand what they are asking and why you are answering what you are answering. I had 3 SIMs – HSRP, Port channel, and Monitoring (monitoring only had archive and to add the existing flow config), there were like 3 or 4 questions I didn’t see before…

How long does it take to update my test tracking on the PersonVue site?

Premium subscription was really helpful. Passed test yesterday.

Passed exam today.Most of the questions were from here. 10-12 questions were not from here. BGP , SPAN , GLBP , top talkers lab .I studied the composite 102 question exams 15+ times. I’d recommend going through the individual questions along with composite exams ( i noticed some question were repeated too frequently in composite exam while others were not and some not at all ). The explanation also helped me remember some questions, which i wasn’t clear about. Thanks Digitaltut.

@DigitalTut – When you planning to upload the PDF with questions under the free site ? Thanks :)

Hi,

looking for PDF question to download them

Thank you

Hello,

any suggestions where I can practice the labs? Just memorizing the commands does not seem like a good idea to me?

Thanks in advance

passed just now, around 90% valid. LABS – 1,Port Channel – 2 po1 ports on both swithes were passive so you are required to make 1 switch (2 ports) changing passive to active ,STP – to make one switch to be secondary for vlan 1 – 1005, Native VLAN – making vlan 10 native on trunk PO1

LAB 2- Netflow- toptalker and related is already configured ,you are required to apply on interface
Archive configuration

LAB 3 – HSRP to configure on both devices with given parameters (group no,IP and preempt) that is all

a maximum of 5 new questions come on multiple choice part (1 snippet drag and drop + 4 multiple choice questiton)

conclusion——– a little tough exam so you have to do the labs well and part 4 – 10 well (so that you can get atleast passing mark)

@barut

You can lab up all of these examples in GNS or Eve-ng.
They are both free, you can download the ios images from the internet.

@CCNP-2022 thanks. I meant, the pre-configured setup. Lab questions require entering a few commands on an already built topology. Do we have these topologies, pre-configured somewhere here?

@Digitaltut – I have same question as Sandhya has. Thanks.

@barut

No I just used the examples and built them out based on other sites like network lessons dot com.

Could anyone tell me what is that interface archive I keep reading about? haven’t found it in any study material for CCNP

Hi,

looking for PDF question link to download them

Thank you

Passed. There were around 10 new questions (out of 98). Mostly about BGP and Wireless. BGP questions were for instance about forcing traffic out a certain way. You need to select which command on which router forces the traffic in the desired way.
There were 3 labs. Not too complicated.
-OSPF with 3 routers. Left one has loopback in area 1 and ethernet in area 0. Middle router all 3 interfaces in area 0, right one loopback in area 2 and ethernet in area 0. Loopback IPs need to be advertised on all routers. In addition, MD5 authentication needs to be set.
-VRRP on a vlan interface with timer. No authentication was needed.
-Simple SPAN on local interfaces, top-talkers to be configured and applied on interface and IP SLA to be set and activated.
Good luck!

@MO,

This OSPF lab is the same of OSPF Authentication Sim (Draft Version) ?

Question about exam labs… Do you get ‘?’ and tab?

Hi everyone,
Passed today. I’d say 4-5 new questions out of 98 and 2 new drag&drop. There were 3 labs:
1. EEM – precisely the same as here
2. BGP – same as here, but you were allowed to make changes only on R2. I just added an as-override command under “address family ipv4” for both R1&R3 neighbors.
3. OSPF – There were 2 routers interconnected and you needed to configure neighborship without using the “network” statement under the “router ospf” and with no DR/BDR election. So you basically would need to apply “ip ospf 1 area 0” under all “up” interfaces (including loopback) and “ip ospf network point-to-point” under the interconnecting interfaces.

Thank you digitaltut! Without your resources, this exam would be x100 times harder even though I have 10 years of experience in networking.

Any website recommendations for Azure and AWS exams, like this website?
Thanks in advance.

Does anyone know i must re certify do i need to pass 1 encore exam or must i pass2 exams ?

Is there LABS in ENCOR exam?
Thank you

@Alon – You need to just pass this encore exam to re-certify OR another way to re-certify is to do do any 2 of the other exams within CCNP. So the easiest way to re-certify is to simply do this one exam called 350-401 ENCOR.

Thanks allot

Does anyone have a suggestion what video study course is recommended to study for the 300-401 exam , udemy which one ? there are so many , or ine ?

meant 350-401

@FRANCO YES TAB AND ? WORKED FOR ME.

I passed my exam today!!
Relatively easy exam if you have a good knowledge of the subject and study a lot of quizzes from 4 to 10, also the individual questions by topic on this site.
Labs: HSRP, NETFLOW TOP TALKERS and PORTCHANNEL (STP) are all on the site.
I totally thank @digital tut !! A highly recommended site, 95% questions are here. New ACL or NAT questions, and some automation
I recommend passing the 102-question simulators in a percentage of 85% to 87% to be effective
only 1 or 2 times I achieved more than 90%
Success everyone!

Passed! Thank you, DigitalTut.
3 labs – ospf with network command and md5 (3 routers), ospf with point-to-point, and EEM.
Some new QQs (DNA, automation mostly) not that many, but if you practice enough the questions available here, you will pass. Practice the big composite tests 8-10 times, as recommended here.
Good luck!

how do i get pdf and how many questions?

@TeluguTalli
nearly 800 questions

is the premium membership valid for 30 days from the date of purchase? If purchased today, will it be valid till march 4th? and will one month subscription be enough to pass if I spend an hour everyday studying it?

Passed the exam yesterday. There were about 10 new questions. I got the two OSPF configuration sims and EEM sim.

@k
thanks, questions what are mentioned here are those the one or need to purchase subscription and i will get PDF?

how can we know the Local SPAN or Remote SPAN in the exam ?
is there mention in to the question in real exam ?

Taking exam on 2/7, already decided I wont be passing the monitoring sim. Otherwise feeling good, have done big composite quiz 10+ times and passed 90% 2-3 times. Otherwise gotten 80% and above. Anyone have tips on studying for the sims without having a real lab environment?

Hello Guys, Can someone be kind enough to share the latest ENCOR Dumps 350-401 to otireland @ gmail.com please. Thanks

Hi team,
My CCNP Routing and switching (old cert version) is expiring in one month..
What would be the easiest way to renew it? I guess I need to pick an exam..
Thanks!

@you can use gns3 or pnetlab with the virtual devices
@TeluguTalli no, you will be able to access to the all questions and drafts sims to study them

Hello, when doing the labs on the exam do you have the option of tab and ‘?’ in cli?

Thanks!

I’m a premium member, do i have to include in studying Architecture Questions down to Drag Drop Questions 2 or just the New Questions. Its a lot of ground to cover if all questions need to be studied. Can someone provide me the specific questions that need to be studied please.

@EncorDude go through each section twice by reading the question and answers and then taking the quizzes. Once you do that do the big composite exam at least 10 times. Write down the questions you get wrong and study those each time before starting the composite exam. It should take about a month to get to a passing score. I am taking exam tomorrow.

@Anon Woah! So this means I have no choice then but to study ALL of the questions right? Whats the total? About 600+ give or take?