Share your ENCOR Experience

i am a Premium Member . do i need to staudy all question on there or only enough to study Part 4 – 10 ? please answer me.

@Digtaltut

Could you please update the new questions and the new BGP (as-override) SIM . Thanks

@KR you need to study everything.

I work at an ISP (MPLS Core) and it’s really hard to understand the automation topic/questions. As network engineers, how do you study these topics?

Got 3 labs

1. Fix Portchannel + Native Vlan on the Portchannel + Setting one switch as secondary for a Vlan range

2. GLBP (glbp ip, glbp priority, glbp preempt delay).

3. Config Archive + Netflow (netflow was already configured, you were asked to enable it on an interface for transmitted traffic, ip flow ingress).

A few (maybe 5) drag and drops (nothing new here) and 2-3 code snippets (nothing new here).

In general, there were a lot of questions from the “Architecture” part (Wireless, Wireless Controllers, SD Access, QoS, MAC, TCAM, FIB, RIB), many AAA and ACLs. Got a few questions about Python, JSON syntax, a few about OSPF/BGP and a few about VMs.

I got around 10-12 questions which were either new or changed to a great degree (Python libraries -> cURL, Postman, ncclient, requests. something about DNA Authentication API -> helath status, vlan names, acces token, issues that are logged. A question about logging discriminator asking to filter a certain log message).

All in all, it was a tough exam and I barely got away because of the labs.

Studying the Official certification guide is nowhere close to passing the exam.

Hi everyone, new to this page. Where can I get the latest dumps? Is there any lab questions? I thought there are only Multiple choice

@Sr.X
I understand your situation bro.no way, try to study.cisco had mixed up everything. There are wireless , virtualization,DNA questions too ,you don’t know but push you to study. It not help you in ISP environment. What to do.

Passed the exam today, @Digitaltut thank you very much especially the LABS posted here it worked for me. I got BGP with allowas-in to configure on R1 & R3 same as here and GLBP same as here and IP SLA, Simple SPAN and Top-talkers and nothing to worry all parameters are given. Thank you again!!!!

I’ve passed the exam today. There are around 7 out of 98 questions that are new from me but most are in the dumps. Had 3 Lab Sims: LACP/Native VLAN/PVST+ sim, HSRP sim(same set of config with the VRRP sim here) and Archive-logging/Netflow Top-talkers sim. Good luck on the future exam takers!

Hello everybody. I passed the exam yesterday, 01-23.
Total 98Q, 4 labs.

Labs.: EEM, PORT CHANNEL, OSPF and BGP.

I can safely say that 80% of the test questions are here on Digitaltut. Just study the contents well and practice the composite quizes and you will be successful.

@Digitaltut thank you very much.

I want to know what are the advantages when subscribing to Premium Membership?

Hello friends, I have been studying 350-401, but I need to pass the exam as soon as possible, just memorizing and understanding the questions is enough to pass the exam_.

Thank you.

Hello friends, many of the digital tut questions are in the exam, but the pool is 500, so you should study.

Regarding the Labs, these are the same as those in the exam

Personally, the one for OSPF, VRRP and BGP appeared.

98 questions, divided into 85 alternatives.
(many from SDWAN, Wireless, VRRP, HSRP, Lisp,RIB, FIB, overlay and underlay, and some from DNA, Netconf and Rest)

10 drag and drop
LISP, ETR, PITR, NETCONF, CLOUD vs OnPremise and OSPF vs Eigrp
thanks DigitalTUT

why censorship digitaltut? I tried to post already two messages sharing my experience and you wouldn’t publish them?

Your comment has been posted successfully! Sometimes we hold a comment for a while for moderation but it will be shown soon!

@digitaltut

I am planning to take the premium membership for writing the ENCOR exam. Are your latest dumps valid?

Hello guys
i went for the exam today.
i got lab about GLBP, MONITORING, and i forgot the last one
I got 98 questions in total.
I failed the exam but to be honest 90% of all question are from here. I did not study correctly.
I should have studied more.
Good luck to everyone

I passed the exam today. The labs are same but there are a lot new questions.
Most of the new questions are made to deffer from the book explanations. What I mean is that you know the technology but they wrote the answer in other words, which is really difficult for foreigner to catch the difference. As someone said some of the questions are rewritten in other words but with same result. OSPF lab was the original, not draft. Be carefull with BGP lab. The answer is in the comments
R2(config-router)# address-family ipv4 / don’t forget this, otherwise “as-override” don’t work.
R2(config-router-af)#neighbor 192.168.1.3 as-override
Good luck!

Passed today. Most questions are here in premium section some new maybe 15 out of 98
3 Sims
OSPF without authentication
VRRP with timers
IPSLA/FLOW/SPAN all in 1 big sim
All SIMS very similar to those on here
Good luck everyone

I have passed the exam 2 days ago, i can say only about 5 to 10 questions was out of the site,others just the same . got 3 sim for eem ospf bgp same as here in premium section. about new questions i remember one of theme which was about how to connect multiple sd-access sites!? drag & drops about on-prem and cloud and eigrp ospf as in the premium section. one or two new questions about automation and python.

Hello, any news on the new questions? Soem of the feedback is making me nervous.

thank you @digitaltut, I passed my exam today

Hi,

from where i can download the question?

regards

@tupac, did you only study part 4 to 10?

@anonymous , congrats. how did you now what the result is?, in report score the result is separated for every section . did you used arithmetical average for them.

thank you

Hi guys

How many points I need to pass the exam? When you finish the exam, Is the result displayed?

Thanks

If I go only the composite quizes and the SIM, is it enough to pass the exam?

Took exam yesterday. got 98 questions and sims as below.
There are maybe 2-3 new questions not in here.

Same with Dasho.
OSPF without authentication
VRRP with timers
IPSLA/FLOW/SPAN all in 1 big sim

My result was pending until now (after 24 hours). Do you know when i will get the score?

@Anonymous or anyone know about the below?

Lab 1: IPV4 and IPV6 connectivity
Lab 2: VLAN configurations on L3 Switches

Hello Guy’s,
I have the same question like @Roronoa, can any one give us any answer’s pls.
The composite quizes and the SIM, is it enough to pass the exam ?

@Roronoa : did you have any answer ??

Any news about the Labs that @Anonymous mentioned?

I think the Anonymous report is not reliable.
Nobody is talking about these strange labs.

hello guys,
Any one can answere @Roronoa question ?
Are the composite quizes and the SIM enough to pass the exam?

Lab 1: IPV4 and IPV6 connectivity
Lab 2: VLAN configurations on L3 Switches
Maybe those are from CCNA.

I passed the exam! I got probably 10 new questions about VRF/AAA/ACL/DNA most of them easy if you know the concept but couple of them were really hard for me.
I got three LABs:
1. HSRP (same here with no authentication)
2. Archive/Netflow (same as here)
3. Port-channel/RPVST+ (almost the same very simple / need to set LACP active on one of switches on both ports then set root secondary for ST)

Please follow this instruction to prepare yourself for the exam:
https://www.digitaltut.com/how-to-learn-and-prepare-for-the-exam

I went through all questions (600+) two times and then took Composite Quizzes for 15+, then review the ones I answered wrongs three times…
I also took one of Udemy courses which really is not required to pass the exam but I wanted to get familiar with mostly automation/DNA.

Thank you so much digitaltut and the community…really really helped me to pass the exam.

Hi guys, any idea on the Lab sims the guys are talking about?
Lab 1: IPV4 and IPV6 connectivity
Lab 2: VLAN configurations on L3 Switches

@ENCOR, all questions came from composite quezzes?

I passed the exam today.

3 Labs : GLBP, NETCONF/ARCHIVE, LACP/RSTP ( same as here)
Around 15 Questions not here, but all is well that ends well.

Thanks Digitaltut….!

i need the link to download questions
thank you

@SPSP

Can you explain “NETCONF/ARCHIVE” ? On here it Showa as “Monitoring Services Sim (Draft)” is this the same one?

@Roronoa
Composite is a random test out of 600+ questions and even if you do 10+ times there is still chance you miss some questions so follow the preparation guide to cover all questions and make notes to review later and then do Composite 10+.

@Roronoa I just posted my response (forgot to add my user so it is from Anonymous

I also did Pass4***, it has 620 questions which 99% are covered here and maybe 5 new related to MPLS/MULTICAST which I don’t think you need them.
One problem is that I saw lots of questions with wrong answers and sometimes confuses you so it is better to focus only on one source…
Good luck!

@ENCORE – lots of wrong answers from here or form other sources?

@Curious
Yes, its the same ( out of 4 parts here, exam had only 2)

What is the minumum to pass the exam? CCNA was 82.5% as I remember. In the composite questionns is 90%. Also, if every question is equal to every question in the percentages? For example, if Sims or Drag and Drob, are with more percentages, than ussual QA?
Thank you in advance @digitaltut

Hi,
i need the link to download questions
thank you

Hello All – Is the free site going to get updated with the questions ? I don`t see any link under FAQ section. Thanks :)