Share your ENCOR Experience

My colleague got different set of questions one week ago before i took it this today. I was told it changed since last week. anyway, most of the questions can be found in the premium don’t wait too long.

Hi, i take my examen today pass the exam LAB about CoPP i haved configure the access-list (120-121-122) the clock stop while response the LAB

pulout + for dumps
basj.+tk

Hello, guys!

NEW Lab Simulations and NEW Drag and Drop questions are available on Quizlet flash cards:

quizlet.com/690885132/new-350-401-encor-exam-questions-in-062022-new-lab-simulations-and-new-drag-and-drop-questions-flash-cards/

Good luck!

Hey guys,

please guide me, is there any other LABs except these Labs on the digitaltut (BGP, HSRP,GLBP,EEM) and wenn yes where can i look for?

Thanks in advance

Hello{ all,
I passed my exam today with a good mark (980/1000)
All the questions and drag & drop were from this dump.
laboratories.gq
You can rely to this dump to pass the exam with a good mark.
Good luck on the exam
Regards,

Hi,

@Victoria
did you also have labs too? or just questions and drag & drop

thanks

Hello , I studied 2-3 hours a day and I passed the exam today. Some chapters may take you longer than others but some you will breeze though.
All the questions on the exam are from Victoria dump above, it helped me a lot to pass the exam.

@armin

Victoria is fake

please, is there any simulation (LAB) in ENCORE exam
my exam is scheduled for tomorrow June 16th

thanx

Passed on 15 face new exam 5-10 q more this dumps 4-10 still work

please confirm how many question and lab in exam ?

please confirm how many question and lab in exam ?

and is there any new question please no fake persons reply to get insure that what is now or not

Running the script causes the output in the exhibit. Which change to the first line of the script
resolves the error?
A. from ncclient import *
B. import manager
C. from ncclient import manager
D. import ncclient manager

Some say it’s A || Some say it’s C

Anyone confident with the answer?

Just Passed….premium membership is the way to go! I had 4or5 questions and 2 drag&drops I did not see here. There was no SIM on my exam

Passed on 16th June

No simulation lab
102 question
Many drag and drop

Good luck to all

Hello , I studied 2-3 hours a day and I passed today the exam today. Some chapters may take you longer than others but some you will breeze though.
All the questions on the exam are from Victoria dump above, it helped me a lot to pass the exam.

@fadmour no change in the exam ?

Anyone knows link for latest dumps ?

plz, refer to any value dump about the ENARSI exam 300-410. is it this website that has the newest exam dum about that too same as this ENCOR exam?

Anyone knows link for latest dumps ? Labs?

@Cleiton

Dumps are located in the premium section.
Create an account and login
Upper right corner of page

PASSED TODAY 6/20/2022! digitaltut valid. All the way to go.

I did not get any SIMS, many drag and drops.

I studied for three months with Premium account, last month 3 hours everyday.

If you do the same with Digitaltut you can make it. Study all the concepts you don’t know so you can then understand what the question is actually talking about so then you can understand the question and the answer.

I find hard passing this test if you actually don’t understand what is going on. Just too many questions., on the other hand all the study material digitaltut has make it enough so you can understand the concepts and understand the questions and answers.

THANK YOU community and Digitaltut!! See you in three years :) *Planning to get DevNet now.

test

Passed 6/20/2022, studied with premium for 3 months, last month 3 hours everyday, study the concepts so you can understand the questions and answers.

THANK YOU COMMUNITY AND DIGITALTUT..

I passed the exam today.
No labs, but couple of questions which I have not seen before.

The exam is doable by studying Digitaltut premium, but all sections: 4-10 + old questions from the topics on the right side bar.

See you in 3 years :D

I took the exam today (06/21/2022) and I passed.
there is no sim lab, and most questions are on this digitaltut site.
thank you very much digitaltut

who needs dump can contact me: networktalk.org@gmail . com

I got 96%

No simulation lab
102 question
Many drag and drop

erae
alnbr.Ftk

I pass the exam yesterday. No sim and many drag and drop. 4-10 section not enough, many question 1-3 section

Passed it today, questions here are 100% valid, some of the questions from BGP, ACL, Trunks are slightly different. (almost the same, but with different numbering or different source or desti) if u know the concepts, it will be very very easy. No sims, 102 questions
Thank you very much Digitaltut

Please send me a latest dump of ENCOR 350-401.
Ultel 93 @ gmail com

Pass it today, questions here are 100% valid, with a little variations in some questions.
No labs, 102 questions.
Thank you so much Digitaltut.

Please could someone explain what Premium gives you as opposed to the usual PDF Q&As?

Thanks.

@Bobby, around more or less 500 more questions (and additional new questions every 10-15 days) and an HTML quiz for easy reviewing. If you’re planning to take the exam, I suggest don’t miss availing the premium.

Is studying sections 4 thru 10 enough to pass?

Guys I would first thank @Digitaltut for everything provided here.
especially the additional 9 questions yesterday to part 10, I got 7 of it in my exam today.
Premium membership is your best way to go. all questions are valid.
I prepared for this exam in 20 days (not recommended)
No lab Sim. too many D&D.
I got three questions with some changes, CoPP class_telnet and class_ssh
One ACL question was not clear, should be applied on the outbound of the LAN interface, but no option there, I commented this question to cisco.
read the questions carefully, they sometimes change the english language thus resulting in different answers.
Good Luck all.
I may see you here next year if this platform supports CCIE Lab.

Passed today, all questions (including the latest added to section10 on 23.6) were on the test.
Some questions had different wording (same diagram, same configs, but asked different thing). Read the questions carefully, correct option might be different.
No lab
studied 6 days 12hrs a day – don’t do it this way :)
agree with @Passed_Today on ACL question – subnet mask in all options was inconsistent with diagrams in question and ACL direction in options was reversed – apparently a typo in question, I have also commented it.
@CCNP Hopeful – no, study also old questions, they contain valuable information to not get confused by eventual new questions in exam.

@Passed_Today -congrats on passing! Did you study sections 4 thru 10 only?

@CCNP hopeful. Thanks.
I studied everything in the website, Tutorials, lab sims, and related topics from CCNA tutorials, categorized questions, parts 4-10, practice each quiz in the part sections twice, plus 10 times passing the big composite quiz. I always note down my wrong answers so I go through it each time I retake the quiz.
Good luck

can someone send me the dumps at Georgina 05 @ hotmail .e s

Took the exam last 25th June and passed!!! I reviewed all ENCOR specific topics + part 6-10 Qs, they are still 100% legit!
Exam has 102 questions; drag and drop + multiple choices, no lab sims. no new questions encountered.

Good luck to all that will take the exam and thanks digitaltut!

Pass it today.
questions here are 100% valid.
I studied for two months.
Thanks digitaltut.
See you in three years.

Passed ENCOR but C!sco don’t give specific marks anymore.
No labs & 70% of questions are from here (maybe, even reworded),
20-30% questions from other dumps or brand new questions.
C!sco also testing new questions regularly, so need to know your stuff.

Anyone know where to get real answers to the Security + SYO-601 exam. I know someone who is studying for it, it’s not for me.

Thank you,
D

I passed it

Premium is 100% valid
I got only one new question about ospf configurations
No sims , many DND
Total questions 102 and the time is 2:30 hours

I studied more than half a year for this test
I attended udemy course, then the official guide , for the things that remained unclear I watched videos on YouTube and cbt nuggets, at the end for the past 3 months I studied premium section and questions

Not sure if I will renew it in 3 years, it was a lot of effort we

Good luck everyone

Hello,

I passed it yesterday (29.06.22)
100% of questions are from digitaltut premium with no labs and many D&D+ multiple choices.
There were new questions along with the old ones, so you need to go through all new ENCOR parts and old stuff to have any chance to pass it.

Passed, no new questions, no sims

Where do we get the labs for ” CCIE Enterprise Infrastructure 1.0″?

I have a question for those already taken the exam and for those really Subject Matter Expert in ENCOR topics.

I faced many questions with different answers. I mean the answer provided here in digitaltut is different from answer on other dump sites.
That is a serious concern indeed.
How dependable are the answers provided by digitaltut for ENCOR questions from your experience..

Please comment.

Digitaltuts answers are very dependable. Different answers on other dump sites are wrong most of the time. Just learn digitaltuts answers, you do not want to get a 100% anyways.