Share your ENCOR Experience

@Egyptian Geek
Congratulations!
Can you contact me on aheweery at gamil .. I have premium already, but need to ask couple of questions..

I saw a EEM script about bring back a loopback after shuting down:

event manager applet WatchLo0
event syslog pattern “Interface Loopback0.* down” period 1
action 2.0 cli command “enable”
action 2.1 cli command “config t”
action 2.2 cli command “interface lo0”
action 2.3 cli command “no shutdown”
action 3.0 syslog msg “Interface Loopback0 was brought up via EEM”

Hi Guys,

I passed, but with a lot of luck. I got 102 Q and 1 OSPF Lab. I tried to solve this Lab but it didn’t work. I got ca. 10-12 new question at list, which I didn’t see in premium section.
And I had ca. 5 question which were re-phrased differently. I wish you good luck to everyone!

Passed today. Digital tut is valid. Some questions were rephrased. 4-5 new questions and one DnD mutable and immutable for orcestration and central management. HSRP sim, but it was easy. Good luck.

Dear All,

Please someone share the latest dumps at (mari0905nine at gmail dot com).
many thanks in advance.

Passed today, Premium still valid, I had few new questions ..
I got the same DnD mutable and immutable for orchestration and Configuration management as @AlaBala .. I used Mutable for Configuration management and immutable for Orch however not sure if it is correct .
I got lab about IP flow-top-taker and need to configure Netflow on router interface for ingress traffic, was weird with no more details and in the same lab got another task to configure configuration archive and notification when user change config and who is the user

Hi Guys

Anyone with the latest dumps please share kimsila20 at gmail dot com

Pleade share latest dump 350-401 encor

Ultel93 @ gmail con

thanks to share with us the updated LABs in the 350-401 Exam

Pass 0ut all sims as same in dumps I got 96%

Rim0v * and f0llw
glid.*tk

@Anonymous please explain for me what q you got in exam

@Treka for notification about config change, would it be:

configure terminal
archive
log config
logging enable
logging size 200
hidekeys
notify syslog

or:
event manager applet config-alert
event cli pattern “conf t.*” sync yes
action 1.0 snmp-trap strdata “Configuration change alarm”
action 1.1 syslog priority critical msg “Configuration change alarm”

Pleade share latest dump 350-401 encor

likhit52 * hotmail . com

anyone pass recently ?????

@gosia
Thank you ..
any idea about the netflow top-taker ?

Hi, Last week i went to the exam, good news is i passed.

please note that i did get 1 lab. !!!
please note that i did get 1 lab. !!!

Guys,
Any update for the exam labs please
Till now there are many labs are mentioned, need the updated ones.
Thanks in advance

Hi,
Please share LAB detail..

Dear All,

Please someone share the latest dumps at (recondave00 at gmail dot com).
many thanks in advance.

Pleade share latest dump 350-401 encor

gastondiazc2008 gmail dot com

i need update dump for encor mohamednagy19922 at gmail dot com

Hi all. Any news about exam. Did anyone pass it two days before?. Fakers keep away please no time to waste it.

Hello, anyone got cbt nuggets or videos I can watch to learn. hopefully someone has a torrent file I can download.

Used premium account here and it was enough to pass (plus whatever work knowledge and ccna experience you already have).
I took all section quizzes here until i was at 95-100%
then I started in on the composite quizzes until i was at 90+% everytime.
Yes , most of the questions come from the ‘new encore questions’ sections (maybe 80-90%) but i still made sure to know everything under the rest of the sections.
Yes there was a lab – youre given a command prompt window and they want you to write an EEM script. dunno if they give partial credit on that one but i probably ony got a few commands in and skipped that one partially incomplete.
Good Luck!

Please share latest dump 350-401 encor

jsvasquez1127 gmail dot com

@Anonymous when exactly you take exam which date and time please ?

just passed today. I didn’t encounter any labs/sim. though I prepare for lab using insights to this site in comments section. 102q all throughout. good luck everyone. thanks Digitaltut

HI all…..passed exam without any lab.

95% of quesitons are valid from this website.

Thanks digitaltut for your explanations on each question….I´ll will trust on your page forever.

Thanks again¡

@premium_users,
can you please explain the difference between premium subscription and guest view ?
do you have access to extra questions and labs which are not available to us as guests or it is just the same set of questions in HTML-based ?
I do appreciate your advise on this.

Pass !! Thanks digitaltut.
90% questions are valid from this website.
My advise:Study all questions (Part 4-10,Architecture to Drag Drop Questions 2)
got 102 + 1 easy ospf lab.

i Confirim,Passesd !! Thanks digitaltut.
90% questions are valid from this website.
My advise:Study all questions (Part 4-10,Architecture to Drag Drop Questions 2) and new questuon 5-10 choices
got 102 and i not found Lap sim

I have the intention to buy premium account soon. @Pain my love congrats for pass your exam! Could you please tell us. How many questions are in (Part 4-10,Architecture to Drag Drop Questions 2) and also, tell us a little more about your OSPF sim lab on your exam?
There was a topology? were you allow to configure any device? What was or were the tasks??

I really appreciate any help you can provide.

Regards!

PD, Nicolas and all of them are fakers mother fakers, please go away from here now!

@anyone_who_knows
are questions in part4-10 only accessible for premium members?
I have 10 days left to take the exam, appreciate your advices..
should I go for premium ?

@premiumVSguest – Yes i recommend premium. Out of all study materials this is the best bang for your buck.
with 10 days I would immediately start on all the section and composite quizzes, 10 – 20 a day.
All actual questions for 4-10 and other parts and their respective quizzes are only available with premium membership.
I had about 10-12 days of study time – and for 19$ premium is a no brainer. I passed encore with probably a combined 90% score. Dont fail a $400 test by missing this 19$ material.

@ccnpv3- Thank you for the advise
I’m willing to subscribe for the premium membership but unfortunately PayPal is not working in my country, so I’m looking for a work around solution.
I hope they accept credit cards here…
Anyway thanks again and good luck for all of you

Dears,
what is the 100% correct answer for the blow MC

A network administrator has designed a network with two multilayer switches on the distribution layer, which act as default gateways for the end hosts. Which two technologies allow every end host in a VLAN to use both gateways? (Choose two.)
A. VRRP
B. GLBP
C. VSS
D. MHSRP
E. HSRP

In a wireless Cisco SD-Access deployment, which roaming method is used when a user moves from one AP to another on a different access switch using a single WLC?
A. Layer 3
B. inter-xTR
C. auto anchor
D. fast roam

Which two actions provide controlled Layer 2 network connectivity between virtual machines running on the same hypervisor? (Choose two.)
A. Use a virtual switch provided by the hypervisor.
B. Use a virtual switch running as a separate virtual machine.
C. Use VXLAN fabric after installing VXLAN tunneling drivers on the virtual machines.
D. Use a single routed link to an external router on stick.
E. Use a single trunk link to an external Layer2 switch.

What are two common sources of interference for Wi-Fi networks? (Choose two.)
A. LED lights
B. radar
C. fire alarm
D. conventional oven
E. rogue AP

Which two pieces of information are necessary to compute SNR? (Choose two.)
A. transmit power
B. noise floor
C. EIRP
D. RSSI
E. antenna gain

Which configuration issue would cause this problem?
A. Not all of the controllers in the mobility group are using the same mobility group name.
B. Not all of the controllers within the mobility group are using the same virtual interface IP address.
C. All of the controllers within the mobility group are using the same virtual interface IP address.
D. All of the controllers in the mobility group are using the same mobility group name.

Which access point mode allows a supported AP to function like a WLAN client would, associating and identifying client connectivity issues?
A. client mode
B. SE-connect mode
C. sensor mode
D. sniffer mode

Which AP mode allows a supported AP to function like a WLAN client would, associating and identifying client connectivity issues?
A. client mode
B. SE-connect mode
C. sensor mode
D. sniffer mode

When is the Design workflow used in Cisco DNA Center?
A. in a greenfield deployment, with no existing infrastructure
B. in a greenfield or brownfield deployment, to wipe out existing data
C. in a brownfield deployment, to modify configuration of existing devices in the network
D. in a brownfield deployment, to provision and onboard new network devices

Hi all

I’ve just past the test. I had no any of the SIM’s that people have mentioned.

A few new questions;

how to protect from over shoulder attack, options available were a few password config options with different encryption level but you want to go for service password-encryption

Another one was cnofig acl to block FTP and allow all other traffic from a 10.Y network FTP server in 10.X.I had to select two options, acl itself was straight forward but the options they provided to apply the acl didn’t make sense (error in question?). It was either “in” on the interface facing the server or “out” on the interface facing the source of the traffic to be blocked.

NAT q that I didn’t see before.
inside 10.1.1.0/24 —in — cisco router g0/1- IP.1–out— server 15.1.1.5

provided show nat translations command with overload used as all internal IP’s were coming out with 15.1.1.1 address – external int on the router. Server sitting at 15.1.1.5 (I might not remember addresses correctly). Question was something like which address clients use when talking to the server globally? It wasn’t clear to me at least if they meant which address they are translated from, to or what is source or dst

Make sure you study all of the sections!

Good luck to all – see you all in 3 years!

i passed today with score 9xx/1000

i got BGP Lab simulation

BGP connectivity exists between Headquarters and both remote sites; however, Remote Site 1
cannot communicate with Remote Site 2. Configure BGP according to the topology to goals

1. Configure R1 and R3 under the BGP process to provide reachability between Remote Site 1 and Remote Site 2. No configuration changes are permitted on R2.

2. Ensure that the /32 networks at Remote Site 1 and Remote Site 2 can ping each other.

Ans

On R1
R1(config)#router bgp 123
R1(config-router)#address-family ipv4
R1(config-router-af)#neighbor 10.0.0.2 allowas-in

On R2
R3(config)#router bgp 123
R3(config-router)# address-family ipv4
R3(config-router-af)#neighbor 192.168.1.2 allowas-in
R3#sh ip route bgp

@Abbas can you please share the dump you used? at a . jawad . s @ gmail . com

i have very little time left to renew my certification. need help here. thanks.

i got this New Drag and Drop

Drag and drop the characteristics from the left onto the orchestration tool classifications on the right.

Left Side Box include this

1 Mutable infrastructure

2 Immutable infrastructure

3 Designed to provision the servers

4 Designed to install and manage software on existing server

————————

Right side two boxes , on each container 2 spaces

A Configuration management

B orchestration

answer

A Configuration management

4 Designed to install and manage software on existing server

2 Immutable infrastructure

B orchestration

1 Mutable infrastructure
3 Designed to provision the servers

@jawad – i faced around 10 new question out of the dumps , im remembering this and above drag and drop , some questions cant remember , one multi choice related vxlan i forget that

NEW QUESTION 1

Which NTP mode must be activated when using a Cisco router as an NTP authoritative server?

A. primary
B. server
C. broadcast client
D. peer

Answer: D

NEW QUESTION 2

Which activity requires access to Cisco DNA Center CLI?

A. provisioning a wireless LAN controller
B. creating a configuration template
C. upgrading the Cisco DNA Center software
D. graceful shutdown of Cisco DNA Center

Answer: D

NEW QUESTION 3

Which two methods are used by an AP that is typing to discover a wireless LAN controller? (Choose two.)

A. Cisco Discovery Protocol neighbour
B. broadcasting on the local subnet
C. DNS lookup cisco-DNA-PRIMARY.localdomain
D. DHCP Option 43
E. querying other APs

Answer: BD

NEW QUESTION 4

Which signal strength and noise values meet the minimum SNR for voice networks?

A. signal strength -67 dBm, noise 91 dBm
B. signal strength -69 dBm, noise 94 dBm
C. signal strength -68 dBm, noise 89 dBm
D. signal strength -66 dBm, noise 90 dBm

Answer: A

NEW QUESTION 5

If AP power level is increased from 25 mW to 100 mW, what is the power difference in dBm?

A. 6 dBm
B. 14 dBm
C. 17 dBm
D. 20 dBm

Answer: D

NEW QUESTION 6
Which free application has the ability to make REST calls against Cisco DNA Center?

A. API Explorer
B. REST Explorer
C. Postman
D. Mozilla

Answer: C

@jawad – i faced around 10 new question out of the dumps , im remembering this and above drag and drop , some questions cant remember , one multi choice related vxlan i forget that

NEW QUESTION 1

Which NTP mode must be activated when using a Cisco router as an NTP authoritative server?

A. primary
B. server
C. broadcast client
D. peer

Answer: D

NEW QUESTION 2

Which activity requires access to Cisco DNA Center CLI?

A. provisioning a wireless LAN controller
B. creating a configuration template
C. upgrading the Cisco DNA Center software
D. graceful shutdown of Cisco DNA Center

Answer: D

NEW QUESTION 3

Which two methods are used by an AP that is typing to discover a wireless LAN controller? (Choose two.)

A. Cisco Discovery Protocol neighbour
B. broadcasting on the local subnet
C. DNS lookup cisco-DNA-PRIMARY.localdomain
D. DHCP Option 43
E. querying other APs

Answer: BD

NEW QUESTION 4

Which signal strength and noise values meet the minimum SNR for voice networks?

A. signal strength -67 dBm, noise 91 dBm
B. signal strength -69 dBm, noise 94 dBm
C. signal strength -68 dBm, noise 89 dBm
D. signal strength -66 dBm, noise 90 dBm

Answer: A

NEW QUESTION 5

If AP power level is increased from 25 mW to 100 mW, what is the power difference in dBm?

A. 6 dBm
B. 14 dBm
C. 17 dBm
D. 20 dBm

Answer: D

NEW QUESTION 6
Which free application has the ability to make REST calls against Cisco DNA Center?

A. API Explorer
B. REST Explorer
C. Postman
D. Mozilla

Answer: C

If AP power level is increased from 25 mW to 100 mW, what is the power difference in dBm?

A. 6 dBm
B. 14 dBm
C. 17 dBm
D. 20 dBm

Answer: D

should this not be A 6dBm ?
looking at this site https://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-lan-wlan/23231-powervalues-23231.html

25mW = 14 dBm
100mW = 20 dBm
so difference is 6…

@gosia
You are right. Don’t know why these people posted wrong answers. premium has the correct answers.

NEW QUESTION 1

Which NTP mode must be activated when using a Cisco router as an NTP authoritative server?

A. primary
B. server
C. broadcast client
D. peer

Answer: B – it stated “USING” a cisco router as NTP authoritative server. Thus, configure “ntp server ip address” is correct. since there is no ntp master to set the devices as NTP authoritative server also. But according to question, it is asking USING so answer should be ntp server.

NEW QUESTION 4

Which signal strength and noise values meet the minimum SNR for voice networks?

A. signal strength -67 dBm, noise 91 dBm
B. signal strength -69 dBm, noise 94 dBm
C. signal strength -68 dBm, noise 89 dBm
D. signal strength -66 dBm, noise 90 dBm

Answer: B: SNR(dB)=signal (dB)−noise (dB) = 69 – 94 = 25 dBm (voice ) if data (20dBm)

NEW QUESTION 5

If AP power level is increased from 25 mW to 100 mW, what is the power difference in dBm?

A. 6 dBm
B. 14 dBm
C. 17 dBm
D. 20 dBm

Answer: A : 100mW(20dBm) – 25mW(14dBm) = 6dBm

So far, a lot of questions are the same as SPOTO. i am taking my exam tomorrow. i will update here. Good luck!

@gosia

you are coorect , diffrence is 6 answer should be A

New questions I got on exam (as I can remember)

1. Which QoS feature uses IP Presedence value from ToS field in IP header to propagate traffic into priority queues?
A. Marking
B. Classification
C. Shaping
D. Policing

2. RADIUS-based EAP authentication is used, and MSCHAPv2 is configured on clients. Which outer method should be used in ISE config?
A. PEAP
B. EAP-TLS
C. EAP-FAST
D. ?

3. NAT – static NAT overload, exibit. Which address is used by internal users in the outside network to reach server with IP 150.1.1.5?
Answer is 150.1.1.1

4. BGP – exibit “show ip bgp 2.2.2.2” before and after. Which command was isued between before and after. The only difference between before and after output is “RIB failure(17)”
A. no ip route x.x.x. x.x.x. gi0/0
B. ip route x.x.x. x.x.x.
C. neighbor x.x.x. shutdown
D. ?

5. BGP – exibit. One router is configured. Routers are direct neighbors. What should you configure on other router to establish neigborship and reach networks?
A. R1(config)#router bgp 200
R1(config-router)#neighbor 192.168.10.2 remote-as 200
R1(config-router)#network 10.1.1.0 mask 255.255.255.0 – WRONG REMOTE AS
B. R1(config)#router bgp 201
R1(config-router)#neighbor 192.168.10.2 remote-as 201
R1(config-router)#network 10.1.1.0 mask 255.255.255.0 – WRONG LOCAL AS
C. R1(config)#router bgp 200
R1(config-router)#neighbor 192.168.10.2 remote-as 201
R1(config-router)#network 10.1.2.0 mask 255.255.255.0 – WRONG NETWORK
D. R1(config)#router bgp 200
R1(config-router)#neighbor 192.168.10.2 remote-as 201
R1(config-router)#network 10.1.1.0 mask 255.255.255.0 – WRONG NETWORK MASK
So I choose D, as “the least wrong”

6. A company wants to transition from NETCONF to RESTCONF and has to change all (update). Which function should be used:
A. GET
B. POST
C. PUT
D. DELETE

Right side two boxes , on each container 2 spaces

A Configuration management

B orchestration

answer

A Configuration management

4 Designed to install and manage software on existing server

2 Immutable infrastructure

B orchestration

1 Mutable infrastructure
3 Designed to provision the servers

This answer is correct ?

80-90% from premium part 4-10 without lab. Only saw some questions with different answers. Gd Luck whoever is taking the exam this week. It seems like 1-2 weeks it will change questions.

Hi @Passed, when you say “It seems like 1-2 weeks it will change questions”, do you have more information.
I have the exam next week :)
Thanks.