Share your ENCOR Experience
The new ENCOR 350-401 has come to replace the old CCNP exams so we create the “Share your ENCOR Experience” for everyone to share their experience to prepare for this new exam.
Please share with us your experience to prepare for the new ENCOR 350-401 exam, your materials, the way you learned, your recommendations… But please DO NOT share any information about the detail of the exam or your personal information, your score, exam date and location, your email…
Note:
+ The ENCOR 350-401 exam include lab sims, multiple choice and Drag drop questions.
+ To get the new CCNP Enterprise certificate, you need to pass this ENCOR 350-401 exam (core exam) and one of the concentration exam.
Your posts are warmly welcome! Hope you will find useful information here!
Well Folks, I passed.
Not sure how as this Exam was hard, I used most of the time I had available to me to go through the questions, its unlike me I can finish an exam in under 1/2hr, not this one.
Preparation, don’t do what i did and give yourself a week. Way too much stress.
I would say that 65% is from here, some from Parts 9 but mainly a lot spread from the base and ENCOR/R rated….
There is also a lot and I mean a lot that is not from here.
Where questions are similar that are not but are familiar, They know whats on this site the questions are suitably different. babe its Med? AS prepend, Local preff? is it PE1 or PE 2? if you get my drift enough to change that around.
Lots on BGP/OSPF, Spanning tree, Dam JSON knit picking, SD-WAN/ACCESS, loads of multiple choice (hardest type). Bottom line, you need to know your basics… core routings and topic areas.
when they throw in automation goodies, you can afford to make “A best educated choice
” based on what you have learnt.
Anyhow it can be done, take all the time that you have and re-read the questions as sometimes that is the clue in what they are asking for.
I changed many answers i thought were right only to change last minute.
From now on, Continuing learning / Credits way…not doing this dam exam malarkey if i really have to.
Thanks all, Digitaltut site.
Keep strong all,you CAN do it.
Have you seen the recent new question posted on here?
On premium, they added about 15-20 new questions. Most of them I had on my exam. Definietely all D&D are added
A New VCE and PDF will be released to media fire tonight March 28th.
stay tuned everyone
Hi all,
plz share update dumps. I try to take next month. plz advice me.
Bravo Ccnp-2022,
Gud job. Please continue my legacy
@Digitaltut, did you add a new Encor questions in composite quizzes?
Nice job!
What is the recommended minimum SR for data applications on wireless networks?
A. 10
B. 25
C. 15
*D 20
Should b D instead B or not? @CCNP and @RaterD?
Which two Cisco SD-WAN components exchange OMP information?
*A. WAN Edge
B .vsmart
*C.vBond
D.vAnalytics
E. vManage
^Which two Cisco SD-WAN components exchange OMP information?
should be Edge and vSmart, not vBond
Which two Cisco SD-WAN components exchange OMP information?
A. WAN Edge
B .vsmart
C.vBond
D.vAnalytics
E. vManage
Answer is A and B
OMP runs between the vSmart controller and WAN vEdge routers (and among vSmart controllers as well)
What os the recommended minimum SR for data applications on wireless networks?
10
25
15
20
Answer is 20 right?
Yes
Yes
@Encore
What is SR? Is that suppose to be SNR?
Why 20 and not 25?
Link?
@ENCORE
@CCNP-2022
Thanks for the uploads of the VCE’s and PDFs.
40Q + 665Q
@ Encor, thanks for the efforts but the file not opening for me. Saying that I need newer version. Can you do a pdf?
Hi all where can i get vce simulator for free many thanks
@Digitaltut
New ENCOR Questions- Part 6
Q7: The connection between SW1 and SW2 is not operational. Which two actions resolve the issue? (Choose two)
A. configure switchport mode access on SW2
B. configure switchport nonegotiate on SW2
C. configure switchport mode trunk on SW2
D. configure switchport mode dynamic desirable on SW2
E. configure no switchport nonegotiate on SW1
Correct Answer: C & D
A switchport whose mode is administratively on dynamic (desirable/auto) mode will reject the “switchport nonegotiate” command as it creates a conflict:
“Command rejected: Conflict between ‘nonegotiate’ and ‘dynamic’ status on this interface”
Therefore, you cannot nullify a command that is not allowed to be executed in the first place — Answer E is wrong
####################################################################################################################
New ENCOR Questions- Part 8
Q55: An engineer must prevent the R6 loopback from getting into Area 2 and Area 3 from Area 0. Which action must the engineer take?
A. Apply a fitter list inbound on R2 and R9
B. Apply a filter list outbound on R3 and R7
C. Apply a filter list outbound on R7 only
D. Apply a filter list inbound on R3 and R7
Correct Answer is D.
Filter the route advertisement of R6 Loopback from going in (inbound) to area 2 and area 9 coming from R3 and R7, respectively.
####################################################################################################################
New ENCOR Questions- Part 8
Q56: Which two parameters are examples of a QoS traffic descriptor? (Choose two)
A. MPLS EXP bits
B. bandwidth
C. DSCP
D. packet size
E. ToS
Correct Answer: A and C
Layer 2 —> COS
Layer 2.5 —> MPLS EXP
Layer 3 —> ToS (DSCP/IPP) —> DSCP is a more specific answer than ToS
####################################################################################################################
New ENCOR Questions- Part 8
Q65: In a Cisco SD-WAN solution, which two functions are performed by OMP? (Choose two)
A. advertisement of network prefixes and their attributes
B. segmentation and differentiation of traffic
C. gathering of underlay infrastructure data
D. delivery of crypto keys
E. configuration of control and data policies
Correct Answer: A and D
OMP provides a secure data plane connectivity between vEdge routers by distributing crypto key information allowing for a very scalable and IKE-less architecture — Answer D is correct
OMP distributes control plane information, it does not configure them — Answer E is wrong
Correction: Filter the route advertisement of R6 Loopback from going in (inbound) to area 3 and area 2 coming from R3 and R7, respectively.
@SouthPark: Thank you for your information, we updated them. But for Q55 of New ENCOR Questions- Part 8 we still believe our answers are correct.
This question asks to prevent route advertised into Area 2 and Area 3 only. It does not ask to prevent route advertised into Area 0 so applying a filter list outbound on R3 and R7 would best fit the requirement. In other words, we should filter when R3 and R7 advertise route to Area 2 & area 3 (with outbound direction) so that R2 and R9 do not receive R6 loopback while R3 and R7 still know this route.
“out Filter networks sent from this area”
Is digital tut updated now with the new questions???
VCE and PDF have the same questions right? Currently the total number of questions should be around 660-70 questions, not sure what are those additional 40q mentioned by @Anonymous.
@CCNP-2022 – Can you share the link for new VCE and PDF?
Thank you!!
A client with IP address 209.165.201.25 must access a web server on port 80 at 209.165.200.225. To allow this traffic, an engineer must add a statement to an access control list that is applied in the inbound direction on the port connecting to the web server. Which statement allows this traffic?
A. permit tcp host 209.165.201.25 eq 80 host 209.165.200.225 B. permit tcp host 209.165.201.25 host 209.165.200.225 eq 80 C. permit tcp host 209.165.200.225 eq 80 host 209.165.201.25 D. permit tcp host 209.165.200.225 host 209.165.201.25 eq 80
Answer: C
Is C the correct answer , I think D , could any verify please ?
I Shared just 40 new q above.
Are those same questions in Part 9 or completely new? Can you share via pdf?
Sorry i dont have PDF, just VCE.
The new 40q_new.vce is only 47kb and won’t open with a VCE player. I tried on mobile and desktop version.
where are the VCE/PDF you posted @ENCOR?
Any one please reply , IS digital tut now updated and valid with the new Questions ??????
@ENCOR Any Updates regarding updated and valid dump
my friends.. I did exam yesterday, succesful. The questions on digitaltut here covers 100%, learn those and no worries, it is well worth. However.. exam mixes A, B, C and D so don’t learn answers by the letter or you will fail! there were some questions from the last update. Most questions from older update. No new questions I think. Good luck and thank you Digital Tut!
@Digitaltut
New ENCOR Questions- Part 8
Q55: An engineer must prevent the R6 loopback from getting into Area 2 and Area 3 from Area 0. Which action must the engineer take?
A. Apply a fitter list inbound on R2 and R9
B. Apply a filter list outbound on R3 and R7
C. Apply a filter list outbound on R7 only
D. Apply a filter list inbound on R3 and R7
Correct Answer is D.
R3 and R7 configurations will be something like this:
on R3:
R3(config)#ip prefix-list INTO_AREA_3 deny 6.6.6.6/32
R3(config)#ip prefix-list INTO_AREA_3 permit 0.0.0.0/0 le 32
R3(config)#router ospf 1
R3(config-router)#area 3 filter-list prefix INTO_AREA_3 in —> filter R6 loopback “inbound” to Area 3
on R7:
R7(config)#ip prefix-list INTO_AREA_2 deny 6.6.6.6/32
R7(config)#ip prefix-list INTO_AREA_2 permit 0.0.0.0/0 le 32
R7(config)#router ospf 1
R7(config-router)#area 2 filter-list prefix INTO_AREA_2 in —> filter R6 loopback “inbound” to Area 2
Note: The filter list is applied inbound “on R3 and R7” (not inbound “to” R3 and R7)
I passed my Exam on my first try today. All the questions on the same are the same ones i revised in Vector dumps shared in this forum, thanks Vector! Next Fortinet exams
those 40 new questions. are they the same as what is on this site? is it worth paying to have them converted to pdf?
The .vce file is still not opening.
the 40 questions,. getting error about trying to decrypt it. the player you linked seems to work with other vce files. ty for that.
@ENCOR
The VCE file was created with a newer version. Most of us just have the old version. Maybe you can downscale the version for that file and then save it again?
@Barnes, could you kindly please share the Vector dumps, thanks!
Any one can reply
@encore
@Digitaltut
Anybody can confirm if the premium account now updated with the new questions or not ????
Some questions were added on the 27th March, 2022.
Part 9 has 78 items.
I passed the exam. The dump is valid specially the last 108+ 37 Qs. I have got 15-20 new questions.
Good Luck!
@Passed. What last 108+ 37 Qs? Are you a premium member?
@Passed are you talking about just new q on RaterD file and q that i shared? Can you please confirm?
Rated is valid and most of from the Mar 29th New Qs. But I have got new Qs i have never seen before in the 635 Qs.
That are not in the premium as well?
Hi Guys, How can I have the last dump?
I took the exam today and passed, but I must have been right on the edge! I’m guessing the pass score is a lot lower these days than it used to be.
Quite a few new questions that I’ve never seen on Digitaltut, I would say around 20-25 New Questions that are not here (even if you have premium). Lots of new questions on automation.
There were also similar questions but answers were modified.
This is the last time I’m renewing my Cisco certs as the scope is just to wide and unrealistic imo.
Good Luck!