Share your ENCOR Experience

Avoid using your wireless devices near common sources of interference, such as power cables, microwave ovens, fluorescent lights, wireless video cameras, and cordless phones.

May be fluorescent lights is a LED lights ?

@Alxdander

you are right because LED lights is not interfer wirless
so i think answer corre . ap rogue and Conventional oven

Fluorescent light is those old school tube lights. they should not be LED. I would gamble with LED lights as one of the answers as there been old articles old LED light did indeed cause interference.

Conventional oven is not microvawe oven :))
Cisco asked a very cunning question )))

@ Alexander

Yes i noticed that as well , that’s why im opting for LED lights as the other answer

Here’s another tricky one:

A customer has several small branches and wants to deploy a WI-FI solution with local management using CAPWAP. Which deployment model meets this requirement?
A. Autonomous
B. Mobility express
C. SD-Access wireless
D. Local mode

Could be either B or D, both could be right answer, uses CAPWAP. First thought is local but looking again Mobility express is simpler and user-friendly. Not sure if we need to consider customers feelings lol..

I think that answer is Local mode

@Alexander

so tha answer final is Conventional oven is not correct !!!

so what do you think ?

@Ciscolad

why you are say the LED lights is source interfer wireles !! all doc for this option is not as a source interfer wireless !!

@Anonymous

Just from google, where LED does cause RI to WIFI signals. Can’t find any cisco documents to debunk this but i don’t think conventional oven is right either.

Common Sources of Wireless Interference

There are a wide variety of devices that can cause interference on your 802.11 wireless network. If you suspect that your network is experiencing interference from other sources, look for items on this list as possible suspects.

Interference causing devices:
Microwave ovens
Cordless phones
Bluetooth devices
Wireless video cameras
Outdoor microwave links
Wireless peripherals
PDAs, cellphones
Zigbee – Wireless personal area network technology
Fluorescent lights
WiMAX

Bad electrical connections can also cause broad RF spectrum emissions
Here are some devices that interfere with 5 GHz radios:
Cordless phones
Radar
Perimeter sensors
Digital satellite

https://documentation.meraki.com/MR/WiFi_Basics_and_Best_Practices/Common_Sources_of_Wireless_Interference

Interference causing devices:
Microwave ovens
Cordless phones
Bluetooth devices
Wireless video cameras
Outdoor microwave links
Wireless peripherals
PDAs, cellphones
Zigbee – Wireless personal area network technology
Fluorescent lights
WiMAX
Other 802.11 networks

Here are some devices that interfere with 5 GHz radios:
Cordless phones
Radar
Perimeter sensors
Digital satellite

Radar ? :)))))

Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag (SGT),
is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and
firewalls. Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group. This process is
called classification. Classification can be based on the results of the authentication or by associating theSGT
with an IP, VLAN, or port-profile

====>means security group tag number assigned to each port on a network !

please i need understand this paragraph

Wouldn’t Radar be the answer? That’s one of the options.

May be answers
– Radar
– rogue AP

@Alexander

actually the question is ‘common ‘interference. Not sure radar signal is classified as ‘common’ … though i would prefer this answer from a technical standpoint.

Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag (SGT),
is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and
firewalls. Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group. This process is
called classification. Classification can be based on the results of the authentication or by associating theSGT
with an IP, VLAN, or port-profile

====>means security group tag number assigned to each port on a network !

Which feature does Cisco TrustSec use to provide scalable, secure communication
throughout a network?
A. security group tag ACL assigned to each port on a switch
B. security group tag number assigned to each user on a switch
C. security group tag number assigned to each port on a network
D. security group tag ACL assigned to each router on a network
Correct Answer: B

Hi please share dumps to jose_amo_2 @ hotmail. Com

Which feature does Cisco TrustSec use to provide scalable, secure communication
throughout a network?
A. security group tag ACL assigned to each port on a switch
B. security group tag number assigned to each user on a switch
C. security group tag number assigned to each port on a network
D. security group tag ACL assigned to each router on a network
Correct Answer: B

please answer B or answer C !!!

Which requirement for an Ansible-managed node is true?
A. It must have an SSH server running.
B. It must be a Linux server or a Cisco device.
C. It must support ad hoc commands.
D. It must have an Ansible Tower installed.
Correct Answer: A? or B?

Which feature does Cisco TrustSec use to provide scalable, secure communication
throughout a network?
A. security group tag ACL assigned to each port on a switch
B. security group tag number assigned to each user on a switch
C. security group tag number assigned to each port on a network
D. security group tag ACL assigned to each router on a network
Correct Answer: B

please answer B or answer C !!!

@ciscolad @alxdander
can you confirm this question !!

@Anonymous

Hi please share dumps to irving.bustos88 @ gmail. com please!
I will take the test next wednesday :s

Thanks in advance!

Hey guys good news I passed, 946 score. Vceplus PDF is good to use but you need to revise some answers as some are incorrect. Only ran into one new question .

Related to fabric node and sd wan access . Can’t remember the whole question.

If your want notes and explanation on answers, check with @Alexandar.

@anon answer is B

Which statement about TLS is true when using RESTCONF to write configurations on
network devices?
A. It is used for HTTP and HTTPS requests.
B. It requires certificates for authentication.
C. It is provided using NGINX acting as a proxy web server.
D. It is not supported on Cisco devices.
Correct Answer: C

why answer B is faulte !!

Which statement about TLS is true when using RESTCONF to write configurations on
network devices?
A. It is used for HTTP and HTTPS requests.
B. It requires certificates for authentication.
C. It is provided using NGINX acting as a proxy web server.
D. It is not supported on Cisco devices.
Correct Answer: C

i think answer C and B are correct but only one answer is correct !!
any one can give the answer final

Hi all, if i recertified 300-135 on Aug 2017 and got CCNP, do i need to take 350-401 only and get CCNP Enterprise?

@expire
Go to https://www.cisco.com/c/en/us/training-events/training-certifications/certifications/professional/ccnp-enterprise.html#~exams

You will need to sit encore 350-401 and one of the 6 extra exams. 300-410 should be tshoot I believe. So total u need to sit 2 exams to recert.

Which statement about TLS is true when using RESTCONF to write configurations on
network devices?
A. It is used for HTTP and HTTPS requests.
B. It requires certificates for authentication.
C. It is provided using NGINX acting as a proxy web server.
D. It is not supported on Cisco devices.
Correct Answer: C

i think answer C and B are correct but only one answer is correct !!

@anon
my notes are at home but answer is C. Will post the explanation later.

so why it is not anwer B in this question: ? ?

Which statement about TLS is true when using RESTCONF to write configurations on network devices?

please i need more the explanation !!

@Ciscolad What errors can you share with Vceplus?

@anon

Which statement about TLS is true when using RESTCONF to write configurations on
network devices?
A. It is used for HTTP and HTTPS requests.
B. It requires certificates for authentication.
C. It is provided using NGINX acting as a proxy web server.
D. It is not supported on Cisco devices.
Correct Answer: C

why answer B is faulte !!

NGINX is an internal webserver that acts as a proxy webserver. It provides Transport Layer Security (TLS)-based HTTPS. RESTCONF request sent via HTTPS is first received by the NGINX proxy web serve,r and the request is transferred to the confd web server for further syntax/semantics check.

@jtlzhang

You best get pdf from vceplus site and not from spammers above. Their sample Q and A i can already see errors. The VCE one has maybe one or two errors but will be enough to pass.

Ciscolad

Which statement about TLS is true when using RESTCONF to write configurations on
network devices?
A. It is used for HTTP and HTTPS requests.
B. It requires certificates for authentication.
C. It is provided using NGINX acting as a proxy web server.
D. It is not supported on Cisco devices.

for answer B so we have two answers B and C jut only one option is correct

https://tools.ietf.org/html/rfc8040
https://tools.ietf.org/html/rfc8040

https://tools.ietf.org/html/rfc8040

what do you think for thi link for answer B!

@ anon

NGINX is an internal webserver that acts as a proxy webserver. It provides Transport Layer Security (TLS)-based HTTPS. RESTCONF request sent via HTTPS is first received by the NGINX proxy web serve,r and the request is transferred to the confd web server for further syntax/semantics check.

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/166/b_166_programmability_cg/b_166_programmability_cg_chapter_01011.html

@Ciscolad

answer B is not correct !!

What is a benefit of data modeling languages like YANG?
A. They create more secure and efficient SNMP OIDs.
B. They provide a standardized data structure, which results in configuration scalability and consistency.
C. They enable programmers to change or write their own applications within the device operating system.
D. They make the CLI simpler and more efficien

answer B or D !

@ anon

Its B

network administrator is implementing a routing configuration change and enables routing debugs to track routing behavior during the change. The logging output on the terminal is interrupting the command typing process. Which two actions can the network administrator take to minimize the possibility of typing commands incorrectly? (Choose two)

A. Configure the logging synchronous global configuration command
B. Configure the logging delimiter feature
C. Configure the logging synchronous command under the vty
D. Press the TAB key to reprint the command in a new line
E. Increase the number of lines on the screen using the terminal length command

i need the anwer correct ?
AC or AD

What are two common sources of interference for Wi-Fi
networks? (Choose two.)
A. LED lights
B. radar
C. fire alarm
D. conventional oven
E. rogue AP

answer DE or AE or BE ?

Which feature does Cisco TrustSec use to provide scalable, secure communication
throughout a network?
A. security group tag ACL assigned to each port on a switch
B. security group tag number assigned to each user on a switch
C. security group tag number assigned to each port on a network
D. security group tag ACL assigned to each router on a network

Answer C or B ?

Which statement about TLS is true when using RESTCONF to write configurations on
network devices?
A. It is used for HTTP and HTTPS requests.
B. It requires certificates for authentication.
C. It is provided using NGINX acting as a proxy web server.
D. It is not supported on Cisco devices.

Answer B or C ?

they are 4 questions not valid

I need a definitive answer

Which feature does Cisco TrustSec use to provide scalable, secure communication
throughout a network?
A. security group tag ACL assigned to each port on a switch
B. security group tag number assigned to each user on a switch
C. security group tag number assigned to each port on a network
D. security group tag ACL assigned to each router on a network

Answer C or B ?

please i need answer for this question

12. RIPv2 Question. Cannot receive RIP updates. Why?
A. Firewall Port block UDP 520
B. Firewall Port block TCP 520
C. Firewall Port block UDP 502
D. Firewall Port block TCP 502

Answer: ??????

@ Ciscolad

Are the questions in this premium membership section enough to pass the exam?

Which feature does Cisco TrustSec use to provide scalable, secure communication
throughout a network?
A. security group tag ACL assigned to each port on a switch
B. security group tag number assigned to each user on a switch
C. security group tag number assigned to each port on a network
D. security group tag ACL assigned to each router on a network

so who can confirm if answer B is correct or answer C !!

Ciscolad, congratulations!)))
To recertification ccnp, is it enough pass 350-401 exam?only one examine.