Share your ENCOR Experience

@ Real-Exprience-today

Thank you for sharing your experience with the community.

didn’t you get analysis report as there is no miracle and cisco doesn’t gift a certification i have over 20 years experience?

Real-Exprience-today

Thank you for sharing your experience with the community.

didn’t you get analysis report as there is no miracle and no gifts, i have over 20 years experience?

To those posting answers to question or correcting wrong answers PLEASE post a link that supports your answer from the cisco documentation.

@CCNP-2022
Yes, but the links don’t always come through here in the forum

@Try:
as per the link you shared:

TCAM provides three results: 0, 1, and “don’t care.” TCAM is most useful for building tables for searching on longest matches such as IP routing tables organized by IP prefixes. The TCAM table stores ACL, QoS and other information generally associated with upper-layer processing. As a result of using TCAM, applying ACLs does not affect the performance of the switch.

Most switches have multiple TCAMs so that both inbound and outbound security, as well as QoS ACLs, can be evaluated simultaneously or entirely in parallel with a Layer 2 or Layer 3 forwarding decision.

It matches with the answer:
C. The MAC address table is contained in CAM. ACL and QoS information is stored in TCAM.

PPL who took the exam,

Can you tell us the country where you took the exam.

Looking at the comments I feel take the exam if you know your stuff
Not only the dumps

@try,

The link you shared seem to match the answer C in the dump.

TCAM provides three results: 0, 1, and “don’t care.” TCAM is most useful for building tables for searching on longest matches such as IP routing tables organized by IP prefixes. The TCAM table stores ACL, QoS and other information generally associated with upper-layer processing. As a result of using TCAM, applying ACLs does not affect the performance of the switch.

Most switches have multiple TCAMs so that both inbound and outbound security, as well as QoS ACLs, can be evaluated simultaneously or entirely in parallel with a Layer 2 or Layer 3 forwarding decision.

@AnonymousRatedR
No, this don’t matches with Q521
“The MAC address table is contained in TCAM. ACL and QoS information is stored in CAM”
Please read, read, read!
This is a modified question

@DigitalTut
I think the answers provided are wrong for the following:
Which two southbound interfaces originate from Cisco DNA Center and terminate at fabric underlay switches? (Choose two)

A. UDP 67: DHCP
B. ICMP: Discovery
C. TCP 23: Telnet
D. UDP 162: SNMP
E. UDP 6007: NetFlow
If you look at Cisco’s documentation :
https://www.cisco.com/c/en/us/td/docs/cloud-systems-management/network-automation-and-management/dna-center/2-1-2/install_guide/2ndGen/b_cisco_dna_center_install_guide_2_1_2_2ndGen/m_plan_deployment_2_1_2_2ndgen.html

this is for UNDERLAY Traffic.
Therefore I would think both ICMP ( B) and UDP-6007.
Because the section that talks about Underlying communication makes NO Reference to Telnet, SSH, and UDP-67
It does make reference to UDP-68 but that is NOT in the answers

Please advise.

@digitaltut- do you have any comments, people are again reporting 50-60% new questions. We paid subscribers need answers. Are the questions current? Please answer!

Did exam on 20 february an I pass. BUT maybe 30 questions on a total of 106 are new. Yes yes! From the final results (network, virtualisation, SDaccess, etc) I had between 60% and 80%. I don’t how tu calculate but I pass. I made a lot and a lot of exam simulations on digitaltut and was arout 93% before passing the real exam.

Maybe you should wait if your score is below 90% in exams simulations.

But many thanks for digitaltur

Hi RatedR
Your file is missing 2 questions about DNS servers
Regards,

Can you check this, i think there some new questions.

https://www.facebook.com/groups/883840895006696/user/100053546885795

Regards

@DigitalTUT

Is there any update it seems that there new questions.

Regards

@DigitalTUT

look at facebook group maybe new questions Salman Khan

Regards

Hi 9TUT, Please let the premium members know if they have to wait for any new updates or all in the premium files are latest updates

@Hello CAn
The questions are not new. The last update is from 24.01

In a Cisco SD-WAN solution, which two functions are performed by OMP? (Choose two)

A. advertisement of network prefixes and their attributes
B. segmentation and differentiation of traffic
C. gathering of underlay infrastructure data
D. delivery of crypto keys
E. configuration of control and data policies

Answer: A E

I think, the correct answer is A,D
Correct me please if i’m wrong

Explanation:
+ vSmart controller – This software-based component is responsible for the centralized control plane of the SD-WAN network. It establishes a secure connection to each vEdge router and distributes routes and policy information via the Overlay Management Protocol (OMP), acting as a route reflector. It also orchestrates the secure data plane connectivity between the vEdge routers by distributing crypto key information, allowing for a very scalable, IKE-less architecture.

@Doka,

Can you post those questions?

Didier and Raki are two bunch of D I c k su ckers of their Gay father

I will take the exam soon, can you please confirm if digital tut premium dump is up to date?

I am sitting for the exam this evening out of the US. I will update my pass/fail status.

is the Digitaltut dumps they are still valid to pass the exam now? i see many people they are saying stuff which make me ensure if i should go for it now or wait to see if there is new questions?

@STOGYMAN, Good luck .

let us know which material you used
also how many new questions you faced.

Good luck @STOGYMAN

Your feedback is greatly appreciated :)

How does a router behave when configured with the default DNS lookup settings, and a URL is entered on
the CLI?
A. prompts the user to specify the desired IP address.
B. initiates a pinfsfg request to the URL.
C. continuously attxempts tos resolve the URL until the command is cancelled.
D. attempts to query a DNS server on the network
Answer D

QUESTION 464
What does a router do when configured with the default DNS lookup settings, and a URL is entered on the
CLI?
A. initiates a ping request to the URL
B. prompts the user to specify the desired IP address
C. continuously attempts to resolve the URL until the command is cancelled
D. sends a broadcast message in an attempt to resolve the URL
Answer D

I just finished my exam and I passed! A specific score was not presented. In total I would say I saw about 20-25 questions that were new, but most were doable if you studied the content and understand the explanations given for the answers.
A few more questions on ISE
few new drag and drops
few new wireless questions.

I had to take my exam today as my CCNP officially expired today.

My only studying came from this platform and spent two weeks going over all the questions, explanations and all tutorials.

I was kinda sweating this since I would not be able to test again in a week if I fell a bit short.

So If you have put in the time with the current content you should be good to go.

Good Luck All!

I just received my email notification with results. They align identical to Ouilllle’s post on the 20th.
I also scored 60 to 80% and still managed to pass. So I have no idea on how they are weighting the subject matter topics or what is the official lowest score to achieve and still pass.

In light of my results, I humbly retract my statement in the previous post “you should be good to go” : )

While taking the exam I didnt think I was that far off the mark.

So unless your certification is in danger of expiring like mine perhaps it may be beneficial to wait for the updated content.

Cheers!

Thank you Stogeyman for the response.

Do you remember the % you got in each section?

@doka Are you sure about those DNS questions? From what i could find, those questions are from 200-301 CCNA exam.

Yes, i’m sure. This is a CCNA Level, but the questions are from a other 350-401 dump.

Just passed the exam today. I used both the premium section here and the dump from RatedR for review, there were about 50-60 questions in my exam that were new compared to those sources.
– a lot more questions about CoPP with specific examples and choosing the best config (SSH access to device while there already is a telnet ACL and policy-map, effect of existing CoPP for SNMP traffic)
– quite a few new wireless questions (effect of changing FlexConnect AP to Autonomous, SDA without wireless integration etc., easiest way to get WiFi 6 coverage in a small office)
– some new NETCONF questions with specific examples and drag/drops
– one drag/drop for creating an EMM job with cron scheduler and ftp export (two time options, 2 action sequence number options and 2 ftp export options)
– new STP question (influencing blocked ports on non-root device)
– HSRP (which MAC will be used for group 14)
– OSPF (distribute-list blocking specific prefix from being added to routing table, only command syntax in ospf process differentiates correct answer, loopback interface /24 with p2p link type and interface-level ospf area assignment vs ptmp and ospf-process-level network statement as options)

Unfortunately I don’t remember the exact wording of the questions or answers, but tried to at least point out the areas…

Overall, if you understand the concepts, you should pass, but don’t expect a pass if you only memorized the questions.

@Doka:
THe questions you mentioned are not in this site, when checked further , seems to be part of CCNA exam. hope you’re not getting confused

@doka,

Plz verify it once. I don’t see those in digital Tut

Good day,

Can someone please help out with VCE + Designer file.

Thanks

My results came in via email late last night. To my surprise my marks were not great to say the least. I was between 60% and 80% for all topics. I have no idea on how they weight the topics or what the lowest possible score is to pass, but I squeaked by I guess. My experience was exactly the same as Ouilllle who posted on the 20th.

Thnx AnonV and Stogeyman

Now it’s pretty clear the pool has new questions again within span of few weeks.

May be wait till we get new dumps or after waiting the pool changes again.

THanks STOGYMAN and AnonV

now its clear that new questions are added to pool.

Now the question is do we wait for new dumps and then we practice and the pool gets new questions again?

or study concepts and take the exam?

Just did the exam and passed. Many new questions including those already updated by digitut. Some questions are reworded with different answer now etc.

If you go through all questions here, you will surely pass even if dont answer any new questions not on here

@chrisnasah
How many questions out of the 500+ that are available here ?

@T bag

It’s on page 105

https://www.digitaltut.com/share-your-encor-experience/comment-page-105#comments

@digitaltut

When would you update?

regards

@ABC
all of the 582 questions are on here.

@Digital

Please inform us about the update, my certificaction will expire on march 6 and need to take the exam.

regards

@digitaltut,
Can you confirm if you are going to add the new questions?
Thanks

@RatedR
What occurs when a high bandwidth multicast stream is sent over an MVPN using Cisco hardware?
A. The traffic uses the default MDT to transmit the data only if it isa (S,G) multicast route entry
B. A data MDT is created to if it is a (*, G) multicast route entries
C. A data and default MDT are created to flood the multicast stream out of all PIM-SM neighbors.
D. A data MDT is created to allow for the best transmission through the core for (S, G) multicast route entries.

Correct answer is D

This question is also missing in your dump (from digitaltut)

took the exam yesterday and passed.. don’t rely on memorizing questions, you will fail.

about 20 new questions but it’s doable if you understand the concepts

@Digital. I did the exam on Feb 20 and many many new questions. If you can re-schedule do it but on the otherr hand, just study the more that you can. Practice questions, read abiut concepts.

A thing that I am sure and other can confirm, the fact that the minimal score of 82% is not really the minimum. For all five subjects of the exam I had between 60% and 80%.

Be confident. During the exam I was certain to have a failure. Stdudy and study! Believe. If you have more than 95% during exam simulation, you will be ok. The rest is out of your control. Take care

Hello Encor mates.

I have a Valid PDF dumps with 223q only, the dumps are valid (100%) few friends of mine wrote yesterday and Today. Only issue I have I am struggling to convert PDF into VCE file. I require VCE in order for me be able to convert it. when I search on google I only find demo that convert only 5 q.I dont mind sharing it but I need a vce or someone to convert form PDF into VCE. Email. mike.reemedATgmail.com. I am planing to take my exam 2rd week of March.

I AM NOT A SCAM NOT HERE TO WAIST ANYONE TIME.Your success is mine success.

Regards,
Tbag