Share your ENCOR Experience

Good new everyone,

I was able to get updated DUmps with New questions:

https://www.mediafire.com/file/f9oiqzlmr4jsv1o/Encore_350-401_dumps.pdf/file

Good luck Everyone.

Note: people will try selling this for money. There is absolutely no Money Involved.

@Samuel or anybody else can you please clarify, did you answer C or D for question about “.. prevents R3 from receiving the LSA about 172.16.1.4/32 “? Thanks.

Hi everyone

@Samuel are NEW ENCOR questions 4 – 8 enough to pass the exam?

Hi all,

I’m creating a VCE file too, but it will take sometime

The pdf uploaded has a section for New questions.

Everyone who has passed, let us know if those questions are in the PDF

No, the entire pool.. from architecture to drag and drop just to be safe

Please use the above new questions on the link from RateDR. all new questions are there with answers and they were in the exam.

Hi Samuel,

Thanks for the confirmation.

hope others who took the exam goes through the New question section the PDF i posted and let us know with their feedback

Hi Samuel,

Thanks for the confirmation.

hope others who took the exam goes through the New question section the PDF i posted and let us know with their feedback

Hi all,

I have posted link for dumps above.

New questions are after page 245 I think.

Let me know who all passed if the questions are in it

Rated R

For some reason my comments are blocked here.

Unable to use my name. Thanks Samuel for the feedback

Rated R

I’m also creating a V C E file to practice.

Hope to post it soon

Am also creating a VCE file to practice

Will post it soon

Rated R

Note: I do not ask for money or sell the dumps.

If anyone is using my name, then it’s a Fish trap

@RatedR, many thanks.
Anybody who taked test recently check the questions plz.

I’m still saying let’s support this site too (DigitalTUT) for the good work which they are doing. If it wasn’t of this site, most of us we wouldn’t have passed or pass these exams. All Thanks to Digital and let’s keep on supporting them.

Thank you,

@RatedR…..thank you for your help.

@Samuel…are you still a premium member? Do you know if answers have been added to the New Questions that did not have answers? Thanks for all your help.

@Samuel…are you still a premium member? Do you know if answers have been added to the New Questions that did not have answers? Thanks for all your help.

@DigitalTut, have you updated the premium section yet? Thank you.

@bastardo it still not updated yet.

3-4 questions have options, answer missing

@Anony, really appreciated.

Can anyone that’s taken the exam recently advise what D+D questions they got pls.

Just took it in Australia and passed. No score has been given.
At least 20 new questions. Thought that I failed but got lucky. Who knew?
The premium membership definitely helps. Especially “The New ENCOR Questions – Part 8” section. I think more than 50% of questions from “The New ENCOR Questions – Part 8” were in my exam tonight.
Good luck guys.

Thank you RatedR for your contribution. Your VCE will be a huge help.

trying to post link for VCE, still not showing up here..

Remove the spaces in above link and download

RatedR

https://www.mediafire.com/file/4vx9lahyp9nrpps/Cisco_350-401_ENCOR_Exam_Implementing_Cisco_Enterprise_Network_Core_Technologies_mhm_570Q_2022_02_12.rar/file

@RatedR

Thank you for files. Could you give a tip where to get VCE application for Windows?

@RatedR I am reviewing your PDF dump and I noticed some answers are different from digitaltut, can you share your thoughts on this? I am expecting to have reference for those answers. Many thanks!

QUESTION 77
How is MSDP used to interconnect multiple PIM-SM domains?
A. MSDP depends on BGP or multiprotocol BGP for interdomain operation.
B. MSDP allows a rendezvous point to dynamically discover active sources outside of its domain.
C. MSDP SA request messages are used to request a list of active sources for a specific group.
D. MSDP messages are used to advertise active sources in a domain.
Correct Answer: D

DigitalTUT answer is C

If you see

https://www.bestciscodumps.com/questions/msdp-used-to-interconnect

https://www.examtopics.com/discussions/cisco/view/69482-exam-350-401-topic-1-question-223-discussion/

some have argues ans is MSDP depends on BGP or multiprotocol BGP for interdomain operation.

but open for discussion

I reviewed the PDF as well.

These answers are different from DigitalTUT’s:

48
77
187
236
270
284
289
432
460
465

Please review and keep us updated.

Thanks!

Some have argued the answer is

MSDP depends on BGP or multiprotocol BGP for interdomain operation.

but open for discussion which is the correct answer

Check this reference which mentioned that the MSDP depends on BGP or multiprotocol BGP (MBGP) for interdomain operation
https://www.cisco.com/c/en/us/td/docs/ios/12_4t/ip_mcast/configuration/guide/mctmsdp.html#wp1054387

@Anony,
can you list out such question numbers here
lets discuss

https://greedhead.net/how-is-msdp-used-to-interconnect-multiple-pim-sim-domains/

Inter-domain: An MSDP-speaking router in a PIM-SM domain has an MSDP peering relationship with one or more MSDP-speaking router(s) in another domain(s). One MSDP-speaking router shares information on sources originating in its domain by sending SA (Source-Active) messages to its peer(s).

How is Layer 3 roaming accomplished in a unified wireless deployment?

A. An EoIP tunnel is created between the client and the anchor controller to provide seamless connectivity as the client is associated with the new AP.
B. The client entry on the original controller is passed to the database on the new controller.
C. The new controller assigns an IP address from the new subnet to the client
D. The client database on the original controller is updated the anchor entry, and the new controller database is updated with the foreign entry.

Correct Answer: D

What is the result when an active route processor fails in a design that combines NSF with SSO?

A. An NSF-aware device immediately updates the standby route processor RIB without churning the network
B. The standby route processor temporarily forwards packets until route convergence is complete
C. An NSF-capable device immediately updates the standby route processor RIB without churning the network
D. The standby route processor immediately takes control and forwards packets along known routes

Correct Answer: D

Let me know what are the correct answers AAA

Which statement about a Cisco APIC controller versus a more traditional SDN controller is true?

A. APIC does support a Southbound REST API
B. APIC supports OpFlex as a Northbound protocol
C. APIC uses a policy agent to translate policies into instructions
D. APIC uses an imperative model

Answer is C

Explanation: The southbound protocol used by APIC is OpFlex that is pushed by Cisco as the protocol for policy enablement across physical and virtual switches.
Southbound interfaces are implemented with some called Service Abstraction Layer (SAL), which talks to the network elements via SNMP and CLI.
Note: Cisco OpFlex is a southbound protocol in a software-defined network (SDN).

How does the RIB differ from the FIB?

A. The RIB is used to create network topologies and routing tables. The FIB is a list of routes to particular network destinations.
B. The FIB includes many routes a single destination. The RIB is the best route to a single destination.
C. The RIB includes many routes to the same destination prefix. The FIB contains only the best route
D. The FIB maintains network topologies and routing tables. The RIB is a Iist of routes to particular network destinations.

C. The RIB includes many routes to the same destination prefix. The FIB contains only the best route

Both answer A and answer C in this question are correct. It is hard to say which correct answer is better.

Which two actions provide controlled Layer 2 network connectivity between virtual machines running on the same hypervisor? (Choose two.)

A. Use a single trunk link to an external Layer2 switch.
B. Use a virtual switch provided by the hypervisor.
C. Use a virtual switch running as a separate virtual machine.
D. Use a single routed link to an external router on stick.
E. Use VXLAN fabric after installing VXLAN tunneling drivers on the virtual machines.

Answer: A B

A customer has deployed an environment with shared storage to allow for the migration of virtual machines between servers with dedicated operating systems that provide the virtualization platform. What is this operating system described as?

A. hosted virtualization
B. type 1 hypervisor
C. container oriented
D. decoupled

Answer: B

Many thanks for the .vce file!!!
Q147 is wrong.
The correct answer is:
– The WLC is connected outside of the fabric

Guys

Need help from all of you.
Please do point out wrong answers with question number.

Will collect all and redo the VCE file

Q284 is wrong
Correct answers:
A. Use a single trunk link to an external Layer2 switch.
B. Use a virtual switch provided by the hypervisor.

Q289 is wrong
Corect answer:
B. type 1 hypervisor

QUESTION 206
Which two southbound interfaces originate from Cisco DNA Center and terminate at fabric underlay switches? (Choose two)
A. UDP 67: DHCP
B. ICMP: Discovery
C. TCP 23: Telnet
D. UDP 162: SNMP
E. UDP 6007: NetFlow
Correct Answer: BD

QUESTION 367
What are three valid HSRP states? (Choose three)
A. listen
B. learning
C. full
D. eastablished
E. speak
F. INIT
Correct Answer: AE (and B or F)

QUESTION 522 (Q402 dulp and wrong.)
Which two GRE features are configured to prevent fragmentation? (Choose two)
A. TCP window size
B. TCP MSS
C. IP MTU
D. DF bit Clear
E. MTU ignore
Correct Answer: BC

QUESTION 432
Which two characteristics define the Intent API provided by Cisco DNA Center? (Choose two)
A. northbound API
B. southbound API
C. device-oriented
D. business outcome oriented
E. procedural
Correct Answer: AD

QUESTION 460
What is the purpose of an RP in PIM?
A. Secure the communication channel between the multicast sender and receiver.
B. Ensure the shortest path from the multicast source to the receiver.
C. Receive IGMP joins from multicast receivers.
D. Send join messages toward a multicast source SPT.
Correct Answer: D

QUESTION 465
Why would a log file contain a * next to the date?
A. The network device is not configured to use NTP time stamps for logging.
B. The network device was unable to reach the NTP server when the log messages were recorded.
C. The network device is not configured to use NTP.
D. The network device was receiving NTP time when the log messages were recorded.
Correct Answer: C

QUESTION 489
Which statement about agent-based versus agentless configuration management tools is true?
A. Agentless tools require no messaging systems between master and slaves.
B. Agentless tools use proxy nodes to interface with slave nodes.
C. Agent-based tools do not require a high-level language interpreter such as Python or Ruby on slave nodes.
D. Agent-based tools do not require installation of additional software packages on the slave nodes.
Correct Answer: C

QUESTION 498
How is a data modeling language used?
A. To enable data to be easily structured, grouped validated, and replicated.
B. To represent finite and well-defined network elements that cannot be changed.
C. To model the flows of unstructured data within the infrastructure.
D. To provide human readability to scripting languages.
Correct Answer: D

Guys, don’t listen to David and lotfi… fakes/scammers
Premium is valid and good enough to pass the exam with ninety something percent.. if your certs are expiring, don’t waste more time but just go and write