Share your ENCOR Experience

I think this question is off in the dump:

Question 4
A network engineer must configure NETCONF. After creating the configuration, the
engineer gets output from the command show line, but not from show running-config. Which
command completes the configuration?
A. Device(config)# no netconf ssh acl 1
B. Device(config)# netconf max-sessions 100
C. Device(config)# netconf lock-time 500
D. Device(config)# netconf max-message 1000

in the official Cisco page they have this for netconf lock-time :

(Optional) Specifies the maximum time, in seconds, a NETCONF configuration lock is in place without an intermediate operation.

The valid range is 1 to 300. The default value is 10 seconds.

So the value 500 is over the range. I guess the correct answer is A.
Honestly I’m bit surprised that nobody pointed this out yet, as this in the Oct dump…

I would like to subscribe for premium, but I see new questions were added this month.
How can I know when the site will have them? Also is there a page to download all the questions as pdf?

@TwoFlower Yes. I think that question is updated on New ENCOR Questions- Part 8

Hi guys! I took the exam today and passed, 106 questions, no score, only passed.
I saw now that Digitaltut just added 12 more questions in the premium section (It would have been great if they added them earlier), only one of them wasn’t in my exam.
From my exam, around 35 questions were new.

@Digitaltut thanks for adding the new questions.

@Digitaltut , Thanks for adding new questions

I Passed the exam today. There were 106 Qs. Premium subscription helped.

@Dess congratulations, if any new questions or only from this questions

@Indu…..has the premium section been updated? Please how many new questions were added to the part 8. I told you my premium subscription ended on monday. Please let me know so i can pay. I helped you earlier, it’s time to help me too. Thanks

Where to download New ENCOR Questions- Part 8?

I had reached out to digital Tut, they said new questions will be updated this week.

Only for Paid premium members

@Anonymous thanks a lot. My premium one month subscription ended on monday, will pay my subscription next week. Thank you for ypur response.

@Hitla

The premium downloads are here:
https://www.digitaltut.com/we-want-to-write-more

@Anonymous
Digitaltut added 40 new questions yesterday

I took the exam two days ago, I am in USA, I had 106 questions, most of them were new questions, I probably got only 40 questions from here, the rest were new questions, I know I was wrong on a lot of question but for some reason I passed the test, no score provided. Lot of new BGP questions, also some new Control Plane and automation questions, and some variations of the questions we already saw here. Good luck to everybody.

Thanks for the feedback Manu.
Which dump did you use? or materials for studies?

@Indu…..thank you so much for your help. Will subscribe to the premium section by monday. Thank you

@Manu , can you confirm if new questions are from digitaltut’s recently added 40 questions

Hey everyone
who wants to get laid with me and not pass this exam?

@M11…..where the 35 new questions you got in the exam same as the new questions that was posted in the premium section? Or where they totally different. Please respond.

@M11, could you write any new questions?

Can someone share experience for d&d is it same with numbers like in premium?

@ratedr all the questions I studied was from premium
Membership,

@anonymous I cannot confirm if the new questions added are what I had on my exam as there were to many new questions don’t remember all of them.

I did my exam today and I passed. Premium membership helps. Most of the new questions they added recently, are in the exam, plus 6 new, and 5 modified aprox. With the membership, study and experience it is not so difficult

Can someone has any idea about the below question?

What are two benefits of virtual switching when compared to hardware switching? (Choose two.)

A. increased MTU size
B. hardware independence
C. VM-level isolation
D. increased flexibility
E. extended 802.1Q VLAN range

I need to know if passing the Encore 350-401 would be enough to recertify my CCIE R&S. Does anyone knows the answer?
Secondo question: supposing I am don’t pass the first attempt, after how many days I can retake it?
5 laborable days or 30 days?

hello everybody
does someone know if passing the Encore 350-401 is enough to recertify CCIE R&S?
Or its needed some others exams?

AJ congrats,

can you tell us which technology were the new questions based of?

Hello every one, in premiun section are update with new questions, so,
I was wondering if my thoughts are correct, almost on all feedback they said the have the new questions, you think if you study only that questions can we pass? or what ather sections needs to study ¿, what do u think?

@estewald

You can take and pass the 350-401 exam or take coursework
through Cisco and get CE’s (Continuing Education) credits.

I would rather take the coursework vs take an exam again.

https://www.cisco.com/c/en/us/training-events/training-certifications/recertification-policy.html#~how-to-recertify

Earn 120 CE credits
Or
Pass one technology core exam and earn 40 CE credits

Pass any two separate professional concentration exams and earn 40 CE credits
Pass any one professional concentration exam and earn 80 CE credits

@digital
Like it or not, we need all questions. My guess is you should create a separate page just for the new ones but those should be added to the quiz pool. By the way, how many new questions have you added? Are there more?
Thank you very much for your effort.

@Digital, I passed today, and my answer to your question is; sure you can only study he new questions and you will pass no problem at all. And if you don’t have time for study, just learn half of the questions and you will be ok.

@estewald

How can you not now and be a CCIE? Is it not that important to you?

The short answer is NO. Passing ENCOR alone doesn’t renew CCIE. You also need to either pass another exam or collect some CE points.

you should look at recertification policy page to see what are the conditions to renew. Not expect us to give you the answer.

… —config missing—
Hello due in 00:00:07
Supports Link-local Signaling (LLS)
Cisco NSF helper support enabled
IETF NSF helper support enabled
Index 1/2/2, flood queue length 0
Next 0x0(0)/0x0(0)/0x0(0)
Last flood scan length is 0, maximum is 0
Last flood scan time is 1 msec, maximum is 1 msec
Neighbor Count is 0, Adjacent neighbor count is 0
Suppress hello for 0 neighbor(s)

An engineer configures OSPF and wants to verify the configuration. Which configuration is applied to this device?

A. R1(config)#interface Gi0/1
R1(config-if)#ip ospf 1 area 0
R1(config-if)#no shutdown

B. R1(config)#router ospf 1
R1(config-router)#network 0.0.0.0.0 0.0.0.0 area 0
R1(config-router)#no passive-interface Gi0/1

C. R1(config)#interface Gi0/1
R1(config-if)#ip ospf enable
R1(config-if)#ip ospf network broadcast
R1(config-if)#no shutdown

D. R1(config)#router ospf 1
R1(config-router)#network 192.168.50.0 0.0.0.255 area 0

Does anyone know the answer for this??

Refer to the exhibit.

An engineer must create a configuration that prevents R3 from receiving the LSA about 172.16.1.4/32. Which configuration set achieves this goal?

A. On R3
ip access-list standard R4_L0
deny host 172.16.1.4
permit any

router ospf 200
distribute-list R4_l0 in

B. On R3
ip prefix-list INTO-AREA1 seq 5 deny 172.16.1.4/32
ip prefix-list INTO-AREA1 seq 10 permit 0.0.0.0/0 le 32

router ospf 200
area 1 filter-list prefix INTO-AREA1 in

C. On R1
ip prefix-list INTO-AREA1 seq 5 deny 172.16.1.4/32
ip prefix-list INTO-AREA1 seq 10 permit 0.0.0.0/0 le 32

router ospf 200
area 1 filter-list prefix INTO-AREA1 in

D. On R1
ip prefix-list INTO-AREA1 seq 5 deny 172.16.1.4/32
ip prefix-list INTO-AREA1 seq 10 permit 0.0.0.0/0 le 32

router ospf 200
area 1 filter-list prefix INTO-AREA1 out

Anyone got this question in exam?

Plz tell correct answer if you know

@Oday; half of which questions?

passed encor exam 2/14, about 30% new-to-me questions (i only “studied” digitaltut for 7 days due to overlapping work projects). premium membership a BIG help, but it is of bigger contribution that you know what you are looking at specially on those command type questions – good thing this is my day to day work, otherwise i would have failed miserably lol

lots of new automation stuff, and a few reworded security and architecture questions

@Digitaltut, special thanks to you for your efforts and making sure that we get what we pay for … it was worth it paying your subscriptions. Today I passed my exam with ninety something percent.. all new questions were there including few new ones. I would say those new questions (5-7) are easy if you worked with wireless , routing and switching.. premium is valid
Book your exam and test now if you can before they change again . My CCNP track including design and ccna was expiring tomorrow. I had to risk and I did it with the help of this site. Thank you

Do you even bother by buying all these fakes dumbs like the ones from David, chan and anonymous… buy your 1 month subscription with digitaltut…

Hi Samuel,

Did you come across the questions I posted?
Do you happen to know answers for them??

how to get ccna?

Yes but I just guessed because I didn’t know the answer.. all new questions were there including those ones that digital didn’t specify the answers

@Samuel….did Digitaltut post questions without answers in the premium section? Congrats on passing your exam.

Suckers
Now how do we get to know the answers for those?

Samuel, can you try completing the questions which are incomplete??

The second last question from anony I went with c and last question from anony I went with D.. those were my assumptions and understanding but I got high marks

Hi Samuel,
Can you try recalling the question or scenario is about?

Hello Anony.
The answers are A and C

@Zeus to which question the answer is “A and C”, can you please explain? Thx

Congrats @Samuel, it would be nice if you could suggest some answers or hints for the un-answered questions (the new ones in Part-8). Thanks!

Hey Admin,

Is the JNCIA – Junos Website down?